Using woven carbon fiber fabric to construct gradient porous structure for passive direct methanol fuel cells

The passive direct methanol fuel cell (DMFC) is a promising candidate power source for portable applications but has to deal with many technical challenges before practical use. This study presents a preliminary investigation on the use of a woven carbon fiber fabric (WCFF) for constructing a gradient porous structure based on the traditional design. The WCFF, carbon paper and carbon-black micro porous layer (MPL) combine into a carbon-based assembly which acts as a mass-transfer-controlling medium at the anode of a passive DMFC. Results show that this novel setup is able to significantly improve the cell performance and facilitate high-concentration operation. A maximum power density of 16.4 mWcm-2 is obtained when two layers of the WCFF are used at a methanol concentration of 8M. This work provides an effective method for using concentrated methanol with no need for major change of the fuel cell configuration.

[1]  Wei Yuan,et al.  Toward using porous metal-fiber sintered plate as anodic methanol barrier in a passive direct methanol fuel cell , 2012 .

[2]  Wei Yuan,et al.  Structural diversity and orientation dependence of a liquid-fed passive air-breathing direct methanol fuel cell , 2012 .

[3]  S. Kamarudin,et al.  Mass and heat transport in direct methanol fuel cells , 2011 .

[4]  Amir Faghri,et al.  Structural optimization of the direct methanol fuel cell passively fed with a high-concentration methanol solution , 2010 .

[5]  Wei Yuan,et al.  Effects of structural aspects on the performance of a passive air-breathing direct methanol fuel cell , 2010 .

[6]  Siti Kartom Kamarudin,et al.  Electrode in direct methanol fuel cells , 2010 .

[7]  C. Kim,et al.  An active micro-direct methanol fuel cell with self-circulation of fuel and built-in removal of CO2 bubbles , 2009 .

[8]  R. Zengerle,et al.  Self-regulating passive fuel supply for small direct methanol fuel cells operating in all orientations , 2009 .

[9]  Ibrahim Dincer,et al.  Performance evaluation of direct methanol fuel cells for portable applications , 2009 .

[10]  S. Morishita,et al.  Improved fuel use efficiency in microchannel direct methanol fuel cells using a hydrophilic macroporous layer , 2009 .

[11]  Jiujun Zhang,et al.  A review of polymer electrolyte membranes for direct methanol fuel cells , 2007 .

[12]  I-Ming Hsing,et al.  Flexible graphite-based integrated anode plate for direct methanol fuel cells at high methanol feed concentration , 2007 .

[13]  J. Nam,et al.  Suppression of the methanol crossover by hydrogels in passively operated flat-pack type DMFCs and its application for the power source of cellular phone , 2006 .

[14]  Eugene S. Smotkin,et al.  Methanol crossover in direct methanol fuel cells: a link between power and energy density , 2002 .

[15]  Christopher K. Dyer,et al.  Fuel cells for portable applications , 2002 .