Characterization and modeling of oriented strand composites

[1]  Forrest W. Breyfogle.  Statistical Methods for Testing, Development, and Manufacturing , 1992 .

[2]  C. Hse.  Properties of flakeboards from hardwoods growing on southern pine sites , 1975 .

[3]  A. G. Zink,et al.  Measurement of Poisson's ratios for yellow-poplar , 1997 .

[4]  I. D. Cave.  The anisotropic elasticity of the plant cell wall , 1968, Wood Science and Technology.

[5]  M. O. Hunt,et al.  Modeling of parallel-aligned wood strand composites , 1993 .

[6]  Qian Wang,et al.  Effects of mat moisture content and press closing speed on the formation of density profile and properties of particleboard , 1998, Journal of Wood Science.

[7]  C. W. McMillin,et al.  Laboratory-Scale Development of a Structural Exterior Flakeboard from Hardwoods Growing on Southern Pine Sites , 1975 .

[8]  J. Mundy,et al.  Predicting the short-term properties of chipboard using composite theory , 1998, Wood Science and Technology.

[9]  L. C. Palka.  Predicting the effect of specific gravity, moisture content, temperature and strain rate on the elastic properties of softwoods , 1973, Wood Science and Technology.

[10]  P. Steiner,et al.  Spatial structure of wood composites in relation to processing and performance characteristics , 1994, Wood Science and Technology.

[11]  M. W. Kelly,et al.  Critical Literature Review of Relationships Between Processing Parameters and Physical Properties of Particleboard. , 1977 .

[12]  B. L. Bledsoe,et al.  Fundamentals of vertical density profile formation in wood composites. Part I. In-situ density measurement of the consolidation process. , 2000 .

[13]  M. Ansell,et al.  Monitoring fiber orientation in OSB during production using filtered image analysis , 2002, Wood Science and Technology.

[14]  李幼升,et al.  Ph , 1989 .

[15]  M. Laborie.  INVESTIGATION OF THE WOOD/ PHENOL-FORMALDEHYDE ADHESIVE INTERPHASE MORPHOLOGY , 2002 .

[16]  M. O. Hunt,et al.  Modeling mechanical properties of single-layer, aligned, mixed-hardwood strand panels , 1992 .

[17]  Takuya Nishimura,et al.  The relationship between the arrangement of wood strands at the surface of OSB and the modulus of rupture determined by image analysis , 2001, Wood Science and Technology.

[18]  J. L. Bienfait.  Relation of the manner of failure to the structure of wood under compression parallel to the grain , 1926 .

[19]  O. Suchsland,et al.  A simulation of the horizontal density distribution in a flakeboard , 1989 .

[20]  Paul R. Blankenhorn,et al.  Composite model prediction of elastic moduli for flakeboard. , 1990 .

[21]  Tsu-Wei Chou,et al.  One-dimensional micromechanical analysis of woven fabric composites , 1983 .

[22]  G. C. Tucker.  Liquidambar styraciflua L. , 1999 .

[23]  M. Wolcott,et al.  Fundamentals of flakeboard manufacture: viscoelastic behavior of the wood component. , 1990 .

[24]  Jay A. Johnson,et al.  Characterization of Flake Orientation in Flakeboard By The Von Mises Probability Distribution Function , 2007 .

[25]  W. Xu,et al.  Linear expansion of wood composites: a model , 1997 .

[26]  P. Winistorfer,et al.  Step-closing pressing of medium density fiberboard; Part 1. Influences on the vertical density profile , 2001, Holz als Roh- und Werkstoff.

[27]  Guk-Rwang Won.  American Society for Testing and Materials , 1987 .

[28]  Wang SiQun,et al.  Hot-pressing of oriented strandboard by step-closure. , 2000 .

[29]  P. Winistorfer,et al.  A direct scanning densitometer to measure density profiles in wood composite products , 1986 .

[30]  R. Hearmon,et al.  Elasticity of Wood and Plywood , 1948, Nature.

[31]  H. A. Smith,et al.  Forest products laboratory. , 1922 .

[32]  Wang Siqun,et al.  Fundamentals of vertical density profile formation in wood composites. Part II. Methodology of vertical density formation under dynamic conditions. , 2000 .

[33]  W. E. Johns,et al.  Technique for isolating flakes from the pressed mat , 1984 .

[34]  L. Bach,et al.  Contribution of flake alignment to performance of strandboard , 1992 .

[35]  A. G. Campbell,et al.  Model analysis of flakeboard variables , 1991 .

[36]  M. Peruggia.  Experiments with Mixtures: Designs, Models, and the Analysis of Mixture Data , 2003 .

[37]  Jozsef Bodig,et al.  Mechanics of Wood and Wood Composites , 1982 .

[38]  G. Tsoumis,et al.  Science and technology of wood : structure, properties, utilization , 1991 .

[39]  Qian Wang,et al.  Formation of the density profile and its effects on the properties of fiberboard , 2000, Journal of Wood Science.

[40]  R. Geimer,et al.  Impact of steam pressing variables on the dimensional stabilization of flakeboard , 1998 .

[41]  V. Sharma,et al.  Optimal orientation of flakes in oriented strand board (OSB) , 1993 .

[42]  Arthur Koehler,et al.  Guide to determining slope of grain in lumber and veneer , 1960 .

[43]  J. Mcnatt,et al.  Computer simulation of laminated wood panel warping , 1986 .

[44]  Bruce G. Heebink,et al.  Reducing Particleboard Pressing Time: Exploratory Study. , 1972 .

[45]  F. Kamke,et al.  Gas pressure and temperature in the mat during flakeboard manufacture , 1988 .

[46]  Eddie W. Price,et al.  Determining tensile properties of sweetgum veneer flakes , 1976 .

[47]  Derek Barnes,et al.  An integrated model of the effect of processing parameters on the strength properties of oriented strand wood products. , 2000 .

[48]  Jozsef Bodig,et al.  Prediction of elastic parameters for wood , 1973 .

[49]  Thomas M. Maloney,et al.  Modern Particleboard & Dry Process Fiberboard Manufacturing , 1993 .

[50]  P. Watkinson,et al.  Effect of humidity on physical and mechanical properties of New Zealand wood composites. , 1990 .

[51]  W. Xu,et al.  Layer thickness swell and layer internal bond of medium density fiberboard and oriented strandboard , 1995 .

[52]  K. Mardia.  Statistics of Directional Data , 1972 .

[53]  F. Kamke,et al.  Quantitative Analysis of Gross Adhesive Penetration in Wood Using Fluorescence Microscopy , 1992 .

[54]  Kristin Lynne Meyers,et al.  Impact of strand geometry and orientation on mechanical properties of strand composites , 2001 .

[55]  D. Barnes.  A model of the effect of strand angle and grain angle on the strength properties of oriented veneer and strand wood composites , 2002 .

[56]  Derek Barnes,et al.  A model of the effect of strand length and strand thickness on the strength properties of oriented wood composites , 2001 .

[57]  J. Bryce.  Southern Forest Experiment Station , 1989 .

[58]  Isaac M Daniel,et al.  Effects of material and geometric nonlinearities on the tensile and compressive behavior of composite materials with fiber waviness , 2001 .

[59]  M. Wolcott,et al.  Fundamentals of flakeboard manufacture: wood-moisture relationships , 2004, Wood Science and Technology.

[60]  Alfred J. Stamm,et al.  Principles of Wood Science and Technology , 2013, Springer Berlin Heidelberg.

[61]  Isaac M Daniel,et al.  Elastic properties of composites with fiber waviness , 1996 .

[62]  Vikram Yadama,et al.  Transverse Isotropy Modeling of 3-D Glulam Timber Beams , 1991 .

[63]  D. Smith.  Waferboard press closing strategies , 1982 .

[64]  P. G..  The Mechanical Properties of Wood , 1915, Nature.

[65]  Frederick A. Kamke,et al.  Fundamentals of flakeboard manufacture: internal-mat conditions. , 1988 .

[66]  P. Winistorfer,et al.  Layer water absorption of medium density fiberboard and oriented strandboard , 1996 .

[67]  R. Bennett,et al.  The influence of furnish moisture content and press closure rate on the formation of the vertical density profile in oriented strandboard , 2001 .

[68]  S. Shaler.  Comparing two measures of flake alignment , 1991, Wood Science and Technology.

[69]  Timothy M. Young,et al.  Modeling and comparing vertical density profiles , 1996 .

[70]  Todd F. Shupe,et al.  Flake Orientation Effects On Physical and Mechanical Properties of Sweetgum Flakeboard , 2001 .

[71]  T. Nishimura,et al.  Evaluation of the arrangement of wood strands at the surface of OSB by image analysis , 2002, Wood Science and Technology.

[72]  P. Shembekar,et al.  Elastic Behavior of Woven Fabric Composites: I—Lamina Analysis , 1992 .

[73]  Qinglin Wu,et al.  Effect of Moisture on The Flexural Properties of Commercial Oriented Strandboards , 1997 .

[74]  Xxyyzz.  Proceedings of the American Society of Civil Engineers , 1896 .

[75]  Wei Xu,et al.  Influence of flake characteristics on horizontal density distribution of flakeboard , 1995 .

[76]  Robert L. Geimer,et al.  Data basic to the engineering of reconstituted flakeboard , 1979 .

[77]  M. D. Strickler.  Effect of press cycles and moisture content on properties of Douglas-fir flakeboard. , 1959 .

[78]  Alan A. Marra,et al.  Technology of Wood Bonding : Principles in Practice , 1992 .

[79]  Min Zhang,et al.  Manufacture and properties of high-performance oriented strand board composite using thin strands , 1998, Journal of Wood Science.

[80]  J. Mcnatt,et al.  How Some Test Variables Affect Bending, Tension, and Compression Values for Particle Panel Products , 1984 .

[81]  Boris R. Polsky,et al.  Statistical Methods for Testing, Development, and Manufacturing , 1992 .

[82]  Shigehiko Suzuki,et al.  Effect of manufacturing parameters on the linear expansion and density profile of particleboard , 1998, Journal of Wood Science.

[83]  J. Brumbaugh,et al.  Effect of flake dimensions on properties of particle boards. , 1960 .

[84]  Paul R. Steiner,et al.  Spatial structure of wood composites in relation to processing and performance characteristics , 1993, Wood Science and Technology.