Optimizing the Efficiency of Lead‐Free Cs2TiI6‐Based Double Halide Perovskite Solar Cells Using SCAPS‐1D

[1]  Ahmad R. Kirmani,et al.  FACsPb Triple Halide Perovskite Solar Cells with Thermal Operation over 200 °C , 2023, ACS Energy Letters.

[2]  D. P. Samajdar,et al.  Numerical Analysis in DFT and SCAPS-1D on the Influence of Different Charge Transport Layers of CsPbBr3 Perovskite Solar Cells , 2023, Energy & Fuels.

[3]  Ashok Kumar,et al.  Band Offset Engineering in Antimony Sulfide (Sb2S3) Solar cells, using SCAPS Simulation: A Route Toward PCE >10% , 2023, Optik.

[4]  A. Abate.  Stable Tin-Based Perovskite Solar Cells , 2023, ACS energy letters.

[5]  Zhen Liu,et al.  Intrinsic Dipole Arrangement to Coordinate Energy Levels for Efficient and Stable Perovskite Solar Cells , 2023, Advanced materials.

[6]  Arindam Basak,et al.  Performance evaluation of lead free CH3NH3SnI3/GeTe Tandem solar cell with HTL layer by SCAPS 1D , 2023, Optik.

[7]  K. Fatema.  Optimizing Inorganic Double Halide (Cs2TiI6) Perovskite Solar Cell for Different Hole Transport Layers using Solar Cell Capacitance Software (SCAPS-ID) , 2023, Materials Today Communications.

[8]  M. Nireekshan Kumar,et al.  Study of Eco-Friendly Organic–Inorganic Heterostructure CH3NH3SnI3 Perovskite Solar Cell via SCAPS Simulation , 2023, Journal of Electronic Materials.

[9]  Md. Mer Mosharraf Hossain,et al.  An extensive study on multiple ETL and HTL layers to design and simulation of high-performance lead-free CsSnCl3-based perovskite solar cells , 2023, Scientific Reports.

[10]  Yanjun Xing,et al.  Managing Iodine and Tin Based Defects for Efficient and Stable Mixed Sn-Pb Perovskite Solar Cells , 2023, Chemical Engineering Journal.

[11]  P. Rout,et al.  Solar energy: A promising renewable source for meeting energy demand in Indian agriculture applications , 2023, Sustainable Energy Technologies and Assessments.

[12]  J. Macan,et al.  Potential of AMnO3 (A = Ca, Sr, Ba, La) as Active Layer in Inorganic Perovskite Solar Cells. , 2023, Chemphyschem : a European journal of chemical physics and physical chemistry.

[13]  W. Tsoi,et al.  Highly efficient p-i-n perovskite solar cells that endure temperature variations , 2023, Science.

[14]  T. Shi,et al.  Remarkable Stability and Optoelectronic Properties of an All-Inorganic CsSn0.5Ge0.5I3 Perovskite Solar Cell. , 2023, The journal of physical chemistry letters.

[15]  R. Devan,et al.  Performance evaluation of metal oxide transport and absorber layers for all oxide heterostructure solar cells with ∼26% efficiency , 2023, Chinese Journal of Physics.

[16]  A. Kasaeian,et al.  Integration of Solid Oxide Fuel Cells with Solar Energy Systems: A Review , 2023, Applied Thermal Engineering.

[17]  A. Majumdar,et al.  Numerical Optimization of Cu_2O as HTM in Lead-Free Perovskite Solar Cells: A Study to Improve Device Efficiency , 2022, Journal of Electronic Materials.

[18]  Zhiteng Wang,et al.  Fluorine-Containing Passivation Layer via Surface Chelation for Inorganic Perovskite Solar Cells. , 2022, Angewandte Chemie.

[19]  Li-ping Zhu,et al.  Enhanced power conversion efficiency of perovskite solar cells using dopant-free carbon nanotubes-Spiro-OMeTAD , 2022, Ceramics International.

[20]  K. Fatema,et al.  Enhancing the efficiency of Pb-based and Sn-based perovskite solar cell by applying different ETL and HTL using SCAPS-ID , 2022, Optical Materials.

[21]  A. Garg,et al.  Hole transporting layer optimization for an efficient lead-free double perovskite solar cell by numerical simulation , 2021, Optical Materials.

[22]  Zhenhua Lin,et al.  Cs2TiI6: A potential lead-free all-inorganic perovskite material for ultrahigh-performance photovoltaic cells and alpha-particle detection , 2021, Nano Research.

[23]  Asim Rashid,et al.  Performance evaluation of Au/p-CdTe/Cs2TiI6/n-TiO2/ITO solar cell using SCAPS-1D , 2021, Optical Materials.

[24]  S. Rahman,et al.  Numerical study of high performance HTL-free CH3NH3SnI3-based perovskite solar cell by SCAPS-1D , 2021, AIP Advances.

[25]  V. Sebastian,et al.  Simulation and optimization studies on CsPbI3 based inorganic perovskite solar cells , 2021, Solar Energy.

[26]  Md. Ferdous Rahman,et al.  Investigation of thin-film p-BaSi2/n-CdS heterostructure towards semiconducting silicide based high efficiency solar cell , 2020, Physica Scripta.

[27]  Samrat Paul,et al.  Numerical study of Cs2TiX6 (X = Br−, I−, F− and Cl−) based perovskite solar cell using SCAPS-1D device simulation , 2019, Solar Energy.

[28]  Xiaomin Liu,et al.  The Role of Dimethylammonium Iodide in CsPbI 3 Perovskite Fabrication: Additive or Dopant? , 2019, Angewandte Chemie.

[29]  M. Kanatzidis,et al.  Prospects for low-toxicity lead-free perovskite solar cells , 2019, Nature Communications.

[30]  Bingbing Tian,et al.  Direct Observation of Perovskite Photodetector Performance Enhancement by Atomically Thin Interface Engineering. , 2018, ACS applied materials & interfaces.

[31]  B. Marí,et al.  Enhancement of the conversion efficiency of thin film kesterite solar cell , 2018 .

[32]  Jiajun Gu,et al.  Cesium Titanium(IV) Bromide Thin Films Based Stable Lead-free Perovskite Solar Cells , 2018 .

[33]  D. Mitzi,et al.  Bandgap Engineering of Lead-Free Double Perovskite Cs2 AgBiBr6 through Trivalent Metal Alloying. , 2017, Angewandte Chemie.

[34]  K. Thyagarajan,et al.  Simulation and Analysis of Lead based Perovskite Solar Cell using SCAPS-1D , 2017 .

[35]  T. Chen,et al.  All-Inorganic Perovskite Solar Cells. , 2016, Journal of the American Chemical Society.

[36]  Aslihan Babayigit,et al.  Toxicity of organometal halide perovskite solar cells. , 2016, Nature materials.

[37]  Gerrit Boschloo,et al.  Bismuth Based Hybrid Perovskites A3Bi2I9 (A: Methylammonium or Cesium) for Solar Cell Application , 2015, Advanced materials.

[38]  D. Mitzi,et al.  Thin-film preparation and characterization of Cs3Sb2I9: A lead-free layered perovskite semiconductor , 2015 .

[39]  Supratik Guha,et al.  Thin film solar cell with 8.4% power conversion efficiency using an earth‐abundant Cu2ZnSnS4 absorber , 2013 .

[40]  Abhijit Ray,et al.  Enhancement of output performance of Cu2ZnSnS4 thin film solar cells—A numerical simulation approach and comparison to experiments , 2012 .

[41]  M. Alim,et al.  Numerical development of eco-friendly Cs2TiBr6 based perovskite solar cell with all-inorganic charge transport materials via SCAPS-1D , 2021 .