论文信息 - A Conductive Fabric Based Smart Insole to Measure the Foot Pressure Distribution with High Resolution

A Conductive Fabric Based Smart Insole to Measure the Foot Pressure Distribution with High Resolution

This study presents a smart insole system made by pressure sensitive fabric. This fabric insole has 360 sensing arrays. Therefore, it can measure the foot plantar pressure distribution with a high resolution. An experiment was carried out to validate this system with the reference measurement system (F-scan). Ten participants were involved in an experimental study. The results showed that the fabric insole can measure the foot plantar pressure distribution accurately, with an average RMSE ranged from 22.46 kPa to 38.54 kPa for different balancing tasks.

Xinyao Hu | Xingda Qu | Chuang Luo | Dongsheng Peng

[1] Qiao Li,et al. In-Shoe Plantar Pressure Measurement and Analysis System Based on Fabric Pressure Sensing Array , 2010, IEEE Transactions on Information Technology in Biomedicine.

[2] R. K. Bhan,et al. A new discrete circuit for readout of resistive sensor arrays , 2009 .

[3] Seong-Gil Kim,et al. The effect of obstacle gait training on the plantar pressure and contact time of elderly women. , 2015, Archives of gerontology and geriatrics.

[4] Xingda Qu,et al. A Portable Insole for Foot Plantar Pressure Measurement Based on A Pressure Sensitive Etextile and Voltage Feedback Method , 2018, 2018 IEEE 23rd International Conference on Digital Signal Processing (DSP).

[5] Xingda Qu,et al. Estimation of Foot Plantar Center of Pressure Trajectories with Low-Cost Instrumented Insoles Using an Individual-Specific Nonlinear Model , 2018, Sensors.