Production Technology Selection for an EOR Redevelopment Project – Lessons Learned from Polymer Pilots

OMV Austria E&P GmbH operates 26 oil fields in Lower Austria. The majority was developed in the 1950s and 1960s and shows an extended decline period. The challenge of operating brown fields is seen to maintain a reasonable oil production over time in a cost effective manner - this can be tackled by a major chemical enhanced oil recovery field redevelopment project. The scope of the polymer field rollout is to create and efficiently operate horizontal polymer injection patterns in two horizons in Lower Austria. OMV follows the strategy to pilot new reservoir and production technologies before their application in field rollouts. Due to the large project investment volume it is crucial to derive information and lessons learned from existing pilot patterns to optimize conceptual decisions on artificial lift, completion, sand control and injection strategy and to reduce technical risk. In the past 10 years several vertical pilot patterns were created to analyze the efficacy of polymer injection in the Tortonian Horizon. Significant operational experience in water treatment, polymer injection and polymer back production, but also in tracer testing was established. Since already the vertical polymer patterns showed not only operational success, but also significant incremental oil production, the idea of horizontal flooding patterns was born. To confirm and understand the impact of polymer injection also in horizontal wells, a first horizontal pilot pattern was drilled; additional pilot wells are currently following. For a future field redevelopment the technology selection should be de facto based on either standard or pilot-proven technologies. This paper describes measures undertaken in the discipline of production technology to prepare for one of the largest field redevelopment projects in the history of OMV Austria. These measures include the application of several pilot projects in the field of artificial lift, completion design and sand control, production and injection allocation. Therewith production technology serves the needs for active reservoir management and thus, follows a holistic field development approach.