Current status of fuel cell based combined heat and power systems for residential sector

Abstract Combined Heat and Power (CHP) is the sequential or simultaneous generation of multiple forms of useful energy, usually electrical and thermal, in a single and integrated system. Implementing CHP systems in the current energy sector may solve energy shortages, climate change and energy conservation issues. This review paper is divided into six sections: the first part defines and classifies the types of fuel cell used in CHP systems; the second part discusses the current status of fuel cell CHP (FC-CHP) around the world and highlights the benefits and drawbacks of CHP systems; the third part focuses on techniques for modelling CHP systems. The fourth section gives a thorough comparison and discussion of the two main fuel cell technologies used in FC-CHP (PEMFC and SOFC), characterising their technical performance and recent developments from the major manufacturers. The fifth section describes all the main components of FC-CHP systems and explains the issues connected with their practical application. The last part summarises the above, and reflects on micro FC-CHP system technology and its future prospects.

[1]  Adam Hawkes,et al.  Fuel cells for micro-combined heat and power generation , 2009 .

[2]  Tsutomu Seki,et al.  Development of highly-efficient and compact fuel processors for PEFC applications , 2001 .

[3]  David P. Wilkinson,et al.  High temperature PEM fuel cells , 2006 .

[4]  J. Yi,et al.  Pumpless thermal management of water-cooled high-temperature proton exchange membrane fuel cells , 2011 .

[5]  Søren Knudsen Kær,et al.  Modelling and evaluation of heating strategies for high temperature polymer electrolyte membrane fuel cell stacks , 2008 .

[6]  Adam Hawkes,et al.  Techno-economic modelling of a solid oxide fuel cell stack for micro combined heat and power , 2006 .

[7]  Patrick Achard,et al.  Study of a small heat and power PEM fuel cell system generator , 2004 .

[8]  Barry Albert Haseltine,et al.  ENERGY TO BUILD , 1975 .

[9]  S. Kolaczkowski,et al.  Evaluation of thermodynamically favourable operating conditions for production of hydrogen in three different reforming technologies , 2002 .

[10]  Robert J. Farrauto,et al.  Precious Metal Catalysts Supported on Ceramic and Metal Monolithic Structures for the Hydrogen Economy , 2007 .

[11]  Martin S. Miller,et al.  A review of polymer electrolyte membrane fuel cell stack testing , 2011 .

[12]  S. Kandlikar,et al.  Thermal management issues in a PEMFC stack – A brief review of current status , 2009 .

[13]  L. Salemme,et al.  Calculation of the energy efficiency of fuel processor – PEM (proton exchange membrane) fuel cell systems from fuel elementar composition and heating value , 2013 .

[14]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[15]  T. Nakata,et al.  Energy-efficiency strategy for CO2 emissions in a residential sector in Japan , 2008 .

[16]  Detlef Stolten,et al.  Ongoing Efforts Addressing Degradation of High Temperature PEMFC , 2010 .

[17]  Chunshan Song,et al.  Fuel processing for low-temperature and high-temperature fuel cells , 2002 .

[18]  Shinn Hwang,et al.  Monolithic structures as alternatives to particulate catalysts for the reforming of hydrocarbons for hydrogen generation , 2005 .

[19]  Nicola Zuliani,et al.  Microcogeneration system based on HTPEM fuel cell fueled with natural gas: Performance analysis , 2012 .

[20]  Janssens-Maenhout Greet,et al.  Annex II: Metrics & Methodology. , 2014 .

[21]  H. Nakagami,et al.  International Comparison of Household Energy Consumption and Its Indicator , 2008 .

[22]  David M. Anderson,et al.  Business Case for a Micro-Combined Heat and Power Fuel Cell System in Commercial Applications , 2013 .

[23]  Rodney L. Borup,et al.  Equilibrium products from autothermal processes for generating hydrogen-rich fuel-cell feeds , 2004 .

[24]  Adam Hawkes,et al.  Fuel cell micro-CHP techno-economics: Part 2-Model application to consider the economic and environmental impact of stack degradation , 2009 .

[25]  S. Kandlikar,et al.  A critical review of cooling techniques in proton exchange membrane fuel cell stacks , 2012 .

[26]  A. Ersöz,et al.  Reforming options for hydrogen production from fossil fuels for PEM fuel cells , 2006 .

[27]  Søren Knudsen Kær,et al.  High temperature PEM fuel cell performance characterisation with CO and CO2 using electrochemical impedance spectroscopy , 2011 .

[28]  K. Yamaji,et al.  Degradation of SOFC Cell/Stack Performance in Relation to Materials Deterioration , 2012 .

[29]  Alex Ferguson,et al.  Fuel cell modelling for building cogeneration applications , 2004 .

[30]  Iain Staffell,et al.  Life cycle assessment of an alkaline fuel cell CHP system , 2010 .

[31]  Cecilia Wallmark,et al.  Design of stationary PEFC system configurations to meet heat and power demands , 2002 .

[32]  V. Ismet Ugursal,et al.  The financial viability of an SOFC cogeneration system in single-family dwellings , 2006 .

[33]  M. Nielsen,et al.  Modeling and Implementation of a 1 kW, Air Cooled HTPEM Fuel Cell in a Hybrid Electrical Vehicle , 2008 .

[34]  P ? ? ? ? ? ? ? % ? ? ? ? , 1991 .

[35]  Ki-Young Kim,et al.  Optimal operation of a 1-kW PEMFC-based CHP system for residential applications , 2012 .

[36]  Iain Staffell,et al.  Fuels and fuel processing for low temperature fuel cells , 2012 .

[37]  Hongbo Ren,et al.  Economic and environmental evaluation of micro CHP systems with different operating modes for residential buildings in Japan , 2010 .

[38]  S. Hokoi,et al.  Energy efficiency and energy savings in Japanese residential buildings : research methodology and surveyed results , 2005 .

[39]  François Maréchal,et al.  A methodology for thermo-economic modeling and optimization of solid oxide fuel cell systems , 2007 .

[40]  Mohammad S. Alam,et al.  Evolutionary programming-based methodology for economical output power from PEM fuel cell for micro-grid application , 2005 .

[41]  David L. Greene,et al.  Status and Outlook for the U.S. Non-Automotive Fuel Cell Industry: Impacts of Government Policies and Assessment of Future Opportunities , 2011 .

[42]  Iain Staffell,et al.  Cost targets for domestic fuel cell CHP , 2008 .

[43]  G. Mudd,et al.  The environmental costs of platinum-PGM mining and sustainability: Is the glass half-full or half-empty? , 2010 .

[44]  Sivakumar Pasupathi,et al.  Validation of an externally oil-cooled 1 kWel HT-PEMFC stack operating at various experimental conditions , 2013 .

[45]  Ronghuan He,et al.  The CO Poisoning Effect in PEMFCs Operational at Temperatures up to 200°C , 2003 .

[46]  D. Wilburn,et al.  Platinum-group metals--world supply and demand , 2005 .

[47]  Sivakumar Pasupathi,et al.  Hydrogen South Africa (HySA) Systems Competence Centre: Mission, objectives, technological achievements and breakthroughs , 2014 .

[48]  Ned Djilali,et al.  An assessment of alkaline fuel cell technology , 2002 .

[49]  A. Hawkes.  Estimating marginal CO2 emissions rates for national electricity systems , 2010 .

[50]  Iain Staffell,et al.  Fuel cells for domestic heat and power: are they worth it? , 2010 .

[51]  Adam Hawkes,et al.  Cost-effective operating strategy for residential micro-combined heat and power , 2007 .

[52]  Z. Qi,et al.  Effect of CO in the anode fuel on the performance of PEM fuel cell cathode , 2002 .

[53]  Iain Staffell,et al.  Zero carbon infinite COP heat from fuel cell CHP , 2015 .

[54]  A. Faghri,et al.  Challenges and opportunities of thermal management issues related to fuel cell technology and modeling , 2005 .

[55]  J. Roes,et al.  Portable PEFC generator with propane as fuel , 2000 .

[56]  M. Delucchi,et al.  The impact of widespread deployment of fuel cell vehicles on platinum demand and price , 2011 .

[57]  Sreenivas Jayanti,et al.  Parametric study of an external coolant system for a high temperature polymer electrolyte membrane fuel cell , 2013 .

[58]  Joongmyeon Bae,et al.  Autothermal Reforming of Natural Gas for High-Temperature Fuel Cells , 2005 .

[59]  Waldemar Bujalski,et al.  High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC) – A review , 2013 .

[60]  P. Ekins,et al.  Hydrogen and fuel cell technologies for heating: A review , 2015 .

[61]  Mohammad S. Alam,et al.  Cost related sensitivity analysis for optimal operation of a grid-parallel PEM fuel cell power plant , 2006 .

[62]  Iain Staffell,et al.  Estimating future prices for stationary fuel cells with empirically derived experience curves , 2009 .

[63]  Mogens Bjerg Mogensen,et al.  Durability of Solid Oxide Cells , 2011 .

[64]  François Maréchal,et al.  Optimization of a fuel cell system using process integration techniques , 2003 .

[65]  Iain Staffell,et al.  The cost of domestic fuel cell micro-CHP systems , 2013 .

[66]  A. Elshkaki,et al.  An analysis of future platinum resources, emissions and waste streams using a system dynamic model of its intentional and non-intentional flows and stocks , 2013 .

[67]  Adam Hawkes,et al.  The role of hydrogen and fuel cells in providing affordable, secure low-carbon heat , 2014 .

[68]  V. I. Ugursal,et al.  Residential cogeneration systems: Review of the current technology , 2006 .

[69]  Werner Lehnert,et al.  Temperature distribution in a liquid-cooled HT-PEFC stack , 2013 .

[70]  T. Wälde.  The International Energy Agency (IEA) , 2003 .

[71]  Andrew G. Glen,et al.  APPL , 2001 .

[72]  Joachim Scholta,et al.  Externally cooled high temperature polymer electrolyte membrane fuel cell stack , 2009 .

[73]  Iain Staffell,et al.  Energy and carbon payback times for solid oxide fuel cell based domestic CHP , 2012 .

[74]  H. C. Maru,et al.  1?10 kW Stationary Combined Heat and Power Systems Status and Technical Potential: Independent Review , 2010 .

[75]  Judith Gurney.  BP Statistical Review of World Energy , 1985 .

[76]  François Maréchal,et al.  Thermo‐Economic Modelling and Optimisation of Fuel Cell Systems , 2005 .