Effect of Ring‐Fusion on Miscibility and Domain Purity: Key Factors Determining the Performance of PDI‐Based Nonfullerene Organic Solar Cells

Compared to the rapid development of nonfullerene organic solar cells (OSCs) based on the state‐of‐the‐art indacenodithiophene (IDT)‐based small molecule acceptors (SMAs), the progress for perylene diimide (PDI)‐based electron acceptors has lagged behind owing to the lack of understanding on the structure–morphology–performance relationship of PDI SMAs. Given the ease of synthesis for PDIs and their high intrinsic electron mobility, it is crucial to identify key material parameters that influence the polymer:PDI blend morphology and to develop rational approaches for molecular design toward high‐performance PDI‐based SMAs. In this study, three pairs of PDI‐based SMAs with and without ring‐fusion are investigated and it is found that ring‐fusion and domain purity are the key structural and morphological factors determining the fill factors (FFs) and efficiencies of PDI‐based nonfullerene OSCs. This data shows that nonfullerene OSCs based on the ring‐fused PDI‐based SMAs exhibit much higher average domain purity and thus increased charge mobilities, which lead to enhanced FFs compared to those solar cells based on nonfused PDIs. This is explained by higher Florry Huggins interaction parameters as observed by melting point depression measurements. This study suggests that increasing repulsive molecular interactions to lower the miscibility between the polymer donor and PDI acceptor is the key to improve the FF and performance of PDI‐based devices.

[1]  Long Ye,et al.  Miscibility–Function Relations in Organic Solar Cells: Significance of Optimal Miscibility in Relation to Percolation , 2018 .

[2]  Joshua H. Carpenter,et al.  Quantitative relations between interaction parameter, miscibility and function in organic solar cells , 2018, Nature Materials.

[3]  Joshua H. Carpenter,et al.  Influence of Donor Polymer on the Molecular Ordering of Small Molecular Acceptors in Nonfullerene Polymer Solar Cells , 2018 .

[4]  H. Ade,et al.  Ring-Fusion of Perylene Diimide Acceptor Enabling Efficient Nonfullerene Organic Solar Cells with a Small Voltage Loss. , 2017, Journal of the American Chemical Society.

[5]  Jianhui Hou,et al.  Spiro-Fused Perylene Diimide Arrays. , 2017, Journal of the American Chemical Society.

[6]  H. Yan,et al.  Design of Donor Polymers with Strong Temperature-Dependent Aggregation Property for Efficient Organic Photovoltaics. , 2017, Accounts of chemical research.

[7]  H. Ade,et al.  Quantitative Morphology–Performance Correlations in Organic Solar Cells: Insights from Soft X‐Ray Scattering , 2017 .

[8]  H. Ade,et al.  Achieving Highly Efficient Nonfullerene Organic Solar Cells with Improved Intermolecular Interaction and Open‐Circuit Voltage , 2017, Advanced materials.

[9]  Yun Zhang,et al.  Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells. , 2017, Journal of the American Chemical Society.

[10]  Hongzheng Chen,et al.  Electron acceptors with varied linkages between perylene diimide and benzotrithiophene for efficient fullerene-free solar cells , 2017 .

[11]  H. Ade,et al.  Significant Influence of the Methoxyl Substitution Position on Optoelectronic Properties and Molecular Packing of Small‐Molecule Electron Acceptors for Photovoltaic Cells , 2017 .

[12]  Long Ye,et al.  9.73% Efficiency Nonfullerene All Organic Small Molecule Solar Cells with Absorption-Complementary Donor and Acceptor. , 2017, Journal of the American Chemical Society.

[13]  Christoph J. Brabec,et al.  Abnormal strong burn-in degradation of highly efficient polymer solar cells caused by spinodal donor-acceptor demixing , 2017, Nature Communications.

[14]  H. Ade,et al.  Control of Mesoscale Morphology and Photovoltaic Performance in Diketopyrrolopyrrole‐Based Small Band Gap Terpolymers , 2017 .

[15]  N. Zhang,et al.  Propeller-Shaped Acceptors for High-Performance Non-Fullerene Solar Cells: Importance of the Rigidity of Molecular Geometry , 2017 .

[16]  Chunru Wang,et al.  Fused Nonacyclic Electron Acceptors for Efficient Polymer Solar Cells. , 2017, Journal of the American Chemical Society.

[17]  Tom Wu,et al.  Ultrahigh Carrier Mobility Achieved in Photoresponsive Hybrid Perovskite Films via Coupling with Single-Walled Carbon Nanotubes. , 2017, Advanced materials.

[18]  H. Ade,et al.  Panchromatic Sequentially Cast Ternary Polymer Solar Cells , 2017, Advanced materials.

[19]  Zhitian Liu,et al.  Non-fullerene small molecule acceptors based on perylene diimides , 2016 .

[20]  W. Ma,et al.  Donor polymer design enables efficient non-fullerene organic solar cells , 2016, Nature Communications.

[21]  N. Doltsinis,et al.  Three-Bladed Rylene Propellers with Three-Dimensional Network Assembly for Organic Electronics. , 2016, Journal of the American Chemical Society.

[22]  Alberto Salleo,et al.  High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor , 2016, Nature Communications.

[23]  M. Wasielewski,et al.  Ring-fusion as a perylenediimide dimer design concept for high-performance non-fullerene organic photovoltaic acceptors. , 2016, Chemical science.

[24]  Juliane Kniepert,et al.  A New Figure of Merit for Organic Solar Cells with Transport-limited Photocurrents , 2016, Scientific Reports.

[25]  A. Heeger,et al.  High-Performance Electron Acceptor with Thienyl Side Chains for Organic Photovoltaics. , 2016, Journal of the American Chemical Society.

[26]  Joshua H. Carpenter,et al.  Rigidifying Nonplanar Perylene Diimides by Ring Fusion Toward Geometry‐Tunable Acceptors for High‐Performance Fullerene‐Free Solar Cells , 2016, Advanced materials.

[27]  H. Ade,et al.  Efficient organic solar cells processed from hydrocarbon solvents , 2016, Nature Energy.

[28]  Christopher M. Proctor,et al.  Significance of Average Domain Purity and Mixed Domains on the Photovoltaic Performance of High‐Efficiency Solution‐Processed Small‐Molecule BHJ Solar Cells , 2015 .

[29]  Yuhang Liu,et al.  Terthiophene-based D-A polymer with an asymmetric arrangement of alkyl chains that enables efficient polymer solar cells. , 2015, Journal of the American Chemical Society.

[30]  C. B. Nielsen,et al.  Non-Fullerene Electron Acceptors for Use in Organic Solar Cells , 2015, Accounts of chemical research.

[31]  Luping Yu,et al.  Recent Advances in Bulk Heterojunction Polymer Solar Cells. , 2015, Chemical reviews.

[32]  S. Albrecht,et al.  Impact of charge transport on current–voltage characteristics and power-conversion efficiency of organic solar cells , 2015, Nature Communications.

[33]  Yuhang Liu,et al.  High-efficiency non-fullerene organic solar cells enabled by a difluorobenzothiadiazole-based donor polymer combined with a properly matched small molecule acceptor , 2015 .

[34]  Xuhui Huang,et al.  A Tetraphenylethylene Core‐Based 3D Structure Small Molecular Acceptor Enabling Efficient Non‐Fullerene Organic Solar Cells , 2015, Advanced materials.

[35]  Daoben Zhu,et al.  An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells , 2015, Advanced materials.

[36]  Christopher M. Proctor,et al.  Importance of Domain Purity and Molecular Packing in Efficient Solution‐Processed Small‐Molecule Solar Cells , 2015, Advanced materials.

[37]  M. Wasielewski,et al.  Slip-stacked perylenediimides as an alternative strategy for high efficiency nonfullerene acceptors in organic photovoltaics. , 2014, Journal of the American Chemical Society.

[38]  He Yan,et al.  Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells , 2014, Nature Communications.

[39]  Christopher M. Proctor,et al.  Competitive Absorption and Inefficient Exciton Harvesting: Lessons Learned from Bulk Heterojunction Organic Photovoltaics Utilizing the Polymer Acceptor P(NDI2OD‐T2) , 2014 .

[40]  M. Steigerwald,et al.  Efficient organic solar cells with helical perylene diimide electron acceptors. , 2014, Journal of the American Chemical Society.

[41]  T. Xu,et al.  Ternary blend polymer solar cells with enhanced power conversion efficiency , 2014, Nature Photonics.

[42]  Xiaowei Zhan,et al.  Non-fullerene acceptors for organic photovoltaics: an emerging horizon , 2014 .

[43]  Daoben Zhu,et al.  A Star‐Shaped Perylene Diimide Electron Acceptor for High‐Performance Organic Solar Cells , 2014, Advanced materials.

[44]  Gregory C. Welch,et al.  Recent advances of non-fullerene, small molecular acceptors for solution processed bulk heterojunction solar cells , 2014 .

[45]  Christopher M. Proctor,et al.  A High‐Performing Solution‐Processed Small Molecule:Perylene Diimide Bulk Heterojunction Solar Cell , 2013, Advanced materials.

[46]  John R. Tumbleston,et al.  Domain Purity, Miscibility, and Molecular Orientation at Donor/Acceptor Interfaces in High Performance Organic Solar Cells: Paths to Further Improvement , 2013 .

[47]  John R. Tumbleston,et al.  Absolute Measurement of Domain Composition and Nanoscale Size Distribution Explains Performance in PTB7:PC71BM Solar Cells , 2013 .

[48]  Miao Xu,et al.  Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure , 2012, Nature Photonics.

[49]  A. Hexemer,et al.  Soft x-ray scattering facility at the Advanced Light Source with real-time data processing and analysis. , 2012, The Review of scientific instruments.

[50]  Markus Hösel,et al.  Roll-to-roll fabrication of polymer solar cells , 2012 .

[51]  Yang Yang,et al.  Polymer solar cells , 2012, Nature Photonics.

[52]  A. Hexemer,et al.  Polymer Crystallization of Partially Miscible Polythiophene/Fullerene Mixtures Controls Morphology , 2011 .

[53]  R. J. Kline,et al.  Structural Origin of Gap States in Semicrystalline Polymers and the Implications for Charge Transport , 2010, 1012.2240.

[54]  Howard A. Padmore,et al.  A SAXS/WAXS/GISAXS Beamline with Multilayer Monochromator , 2010 .

[55]  Shijun Jia,et al.  Polymer–Fullerene Bulk‐Heterojunction Solar Cells , 2009, Advanced materials.

[56]  Detlef-M Smilgies,et al.  Scherrer grain-size analysis adapted to grazing-incidence scattering with area detectors. , 2009, Journal of applied crystallography.

[57]  I. Samuel,et al.  Exciton Diffusion Measurements in Poly(3‐hexylthiophene) , 2008 .

[58]  J. Fréchet,et al.  Polymer-fullerene composite solar cells. , 2008, Angewandte Chemie.

[59]  Harald Ade,et al.  Resonant soft x-ray scattering from structured polymer nanoparticles , 2006 .

[60]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.

[61]  Toshio Nishi,et al.  Melting Point Depression and Kinetic Effects of Cooling on Crystallization in Poly(vinylidene fluoride)-Poly(methyl methacrylate) Mixtures , 1975 .