A simulation and experimental study of operating performance of an electric bicycle integrated with a semi-automatic transmission

The objective of this study is to investigate the dynamic characteristics and optimize the required power of an electric bicycle equipped with a semi-automatic transmission. In this simulation, we analyze the dynamic characteristics and operating characteristics of an electric bicycle at each gear ratio based on the effects of input parameters such as gear-speed, frontal area, and slope grade by using Matlab-Simulink. Through this simulation, an analysis is conducted to maximize the power generation of the electric bicycle. The simulation results show that the required power can be optimized by changing the key parameters mentioned above. In addition, a model-based control study is conducted to control the bicycle speed under the effects of gear-speed and slope grade. We also conduct an experiment on a real road and analyze the dynamics and required power of the electric bicycle. The experimental results agree well with the simulation results at each transmission ratio. This combination of simulations and experiments provides a useful method to estimate the power requirements for the motor of an electric bicycle.

[1]  Ocktaeck Lim,et al.  A Simulation and Experimental Study of Operating Characteristics of an Electric Bicycle , 2017 .

[2]  Yueming Qiu,et al.  Economic and environmental impacts of providing renewable energy for electric vehicle charging – A choice experiment study , 2016 .

[3]  Li Yuan,et al.  The Design of an Electric Bicycle Controller Based on Programmable System on Chip , 2013 .

[4]  Kai He,et al.  Analysis of downshift’s improvement to energy efficiency of an electric vehicle during regenerative braking , 2016 .

[5]  Rahul Sindhwani,et al.  Design of Electric Bike with Higher Efficiency , 2014 .

[6]  Lotfi A. Zadeh,et al.  Fuzzy Sets , 1996, Inf. Control..

[7]  Yasuhito Tanaka,et al.  A Study on Straight-Line Tracking and Posture Control in Electric Bicycle , 2009, IEEE Transactions on Industrial Electronics.

[8]  Tore Hägglund,et al.  Advances in Pid Control , 1999 .

[9]  Yuying Yan,et al.  A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles , 2016 .

[10]  A. Muetze,et al.  Electric bicycles - A performance evaluation , 2007, IEEE Industry Applications Magazine.

[11]  Sungwoo Bae,et al.  Electric vehicle charging demand forecasting model based on big data technologies , 2016 .

[12]  Grant A. Covic,et al.  Wireless Fleet Charging System for Electric Bicycles , 2015, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[13]  Jie Cong Design of Electric Bicycle Controller , 2009, Comput. Inf. Sci..

[14]  Yun Li,et al.  PID control system analysis, design, and technology , 2005, IEEE Transactions on Control Systems Technology.

[15]  Margaret O'Mahony,et al.  Development of a driving cycle to evaluate the energy economy of electric vehicles in urban areas , 2016 .

[16]  Takeshi Yamakawa Electronic circuits dedicated to fuzzy logic controller , 2011, Sci. Iran..

[17]  Gonçalo Duarte,et al.  Indirect methodologies to estimate energy use in vehicles: Application to battery electric vehicles , 2016 .

[18]  Danhua Ouyang,et al.  Progress of Chinese electric vehicles industrialization in 2015: A review , 2017 .

[19]  Dilpreet Kaur Grover,et al.  Simulations of Various Applications of Fuzzy Logic using the MATLAB , 2016 .

[20]  Diego Iannuzzi,et al.  Experimental evaluation of DC charging architecture for fully-electrified low-power two-wheeler ☆ , 2016 .

[21]  Ian McLoughlin,et al.  Campus Mobility for the Future: The Electric Bicycle , 2012 .

[22]  Ali Bekir Yildiz,et al.  Electrical equivalent circuit based modeling and analysis of direct current motors , 2012 .

[23]  Jenny Riesz,et al.  Quantifying the costs of a rapid transition to electric vehicles , 2016 .

[24]  Chang Chieh Hang,et al.  Towards intelligent PID control , 1989, Autom..

[25]  Nguyen Ba Hung,et al.  A study of the effects of input parameters on the dynamics and required power of an electric bicycle , 2017 .

[26]  Khizir Mahmud,et al.  A review of computer tools for modeling electric vehicle energy requirements and their impact on power distribution networks , 2016 .

[27]  Salvatore Strano,et al.  A dynamic model for the performance and environmental analysis of an innovative e-bike , 2015 .

[28]  Thomas Bruckner,et al.  Effects of electric vehicle charging strategies on the German power system , 2017 .

[29]  Matteo Corno,et al.  Human-in-the-Loop Bicycle Control via Active Heart Rate Regulation , 2015, IEEE Transactions on Control Systems Technology.

[30]  Chris Gerada,et al.  A new strategy of efficiency enhancement for traction systems in electric vehicles , 2017 .