Controlling failure using structural fuses for predictable progressive failure of composite laminates

Structural fuses have been used to bias and control failures in structural applications where predictability of the progressive failure or collapse response is important. Tailoring structural fuses by trial and error in large structures that have numerous possible load and failure paths is not possible because the optimum failure sequence is not known a priori. Using nondeterministic methods to tailor structural fuses is computationally expensive. A procedure for developing deterministic measures to optimize structural fuses is presented here. The progressive failure of composite laminates is used for demonstration. Structural fuses are optimized using a reliability optimization. The failure response characteristics of the laminate with optimum structural fuses are used to identify deterministic measures that correlate with high progressive failure predictability. The deterministic measures are validated by using them as surrogate design criteria in a deterministic optimization to optimize structural fuses that control failure and improve progressive failure predictability. The improvement in predictability of the deterministic optimum design achieved by using optimized structural fuses is better than that obtained by optimizing the ply angles of the laminate explicitly for predictability.

[1]  J. Sobieszczanski-Sobieski,et al.  Optimization of car body under constraints of noise, vibration, and harshness (NVH), and crash , 2001 .

[2]  Mark W. Hilburger,et al.  Progressive failure analyses of compression-loaded composite curved panels with and without cutouts , 2004 .

[3]  Majid Sarraf,et al.  Ductile Seismic Retrofit of Steel Deck-Truss Bridges. I: Strategy and Modeling , 1998 .

[4]  Ken J. Craig,et al.  Automotive crashworthiness design using response surface‐based variable screening and optimization , 2005 .

[5]  S. White,et al.  Stress analysis of fiber-reinforced composite materials , 1997 .

[6]  J H Keyak,et al.  The distribution of material properties in the equine third metacarpal bone serves to enhance sagittal bending. , 1997, Journal of biomechanics.

[7]  Satchi Venkataraman,et al.  Optimization of Performance and Failure Predictability in Composite Laminates Undergoing Progressive Failure , 2005 .

[8]  J. Bertram,et al.  Bone curvature: sacrificing strength for load predictability? , 1988, Journal of theoretical biology.

[9]  Yun Li,et al.  Optimization and robustness for crashworthiness of side impact , 2001 .

[10]  Sankaran Mahadevan,et al.  Probabilistic Analysis of Composite Structure Ultimate Strength , 2002 .

[11]  François M. Hemez,et al.  Design of Computer Experiments for Improving an Impact Test Simulation , 2000 .

[12]  Heung-Soo Kim,et al.  Effect of the cross-sectional shape of hat-type cross-sections on crash resistance of an “S”-frame , 2001 .

[13]  R. A. Shenoi,et al.  Progressive failure and ultimate collapse of laminated composite plates in bending , 1997 .