One-step synthesis of novel mesoporous three-dimensional GeO2 and its lithium storage properties

Novel mesoporous three-dimensional GeO2 was successfully synthesized by a facile one-step synthesis method followed by mixing with graphene using a spray drying process. The well-dispersed mesoporous GeO2 demonstrates a bean-like morphology (b-GeO2) with a particle size of 400 to 500 nm in length and 200 to 300 nm in diameter, in which mesopores with an average size of 3.6 nm are distributed. The b-GeO2 without any additional conductive surface layer shows a high reversible capacity for lithium storage of 845 mAh g−1 after 100 cycles, with nearly no capacity fading. When graphene was employed to be mixed with GeO2via a spray drying method, the electrochemical performance is further significantly improved. The b-GeO2/graphene composite electrode gives a higher de-lithiation capacity of 1021 mAh g−1, and the capacity retention is measured to be as high as 94.3% after 200 charge–discharge cycles for constant current cycling at 0.2 C, as well as an excellent rate performance, even displaying a reversible capacity of 730 mAh g−1 at a rate of 5 C.

[1]  Lin Guo,et al.  One‐Step In Situ Synthesis of GeO2/Graphene Composites Anode for High‐Performance Li‐Ion Batteries , 2013 .

[2]  Klaus Müllen,et al.  3D Graphene Foams Cross‐linked with Pre‐encapsulated Fe3O4 Nanospheres for Enhanced Lithium Storage , 2013, Advanced materials.

[3]  Jens Leker,et al.  Current research trends and prospects among the various materials and designs used in lithium-based batteries , 2013, Journal of Applied Electrochemistry.

[4]  Jaephil Cho,et al.  Self-assembled germanium/carbon nanostructures as high-power anode material for the lithium-ion battery. , 2012, Angewandte Chemie.

[5]  Li Lu,et al.  Influence of grain size on lithium storage performance of germanium oxide films , 2012 .

[6]  Lidong Li,et al.  One-step in situ synthesis of SnO2/graphene nanocomposites and its application as an anode material for Li-ion batteries. , 2012, ACS applied materials & interfaces.

[7]  Zhi Yang,et al.  Novel Three‐Dimensional Mesoporous Silicon for High Power Lithium‐Ion Battery Anode Material , 2011 .

[8]  Sarah L. Frisco,et al.  Hybrid Germanium Nanoparticle–Single-Wall Carbon Nanotube Free-Standing Anodes for Lithium Ion Batteries , 2011 .

[9]  Meilin Liu,et al.  Germanium nanotubes prepared by using the Kirkendall effect as anodes for high-rate lithium batteries. , 2011, Angewandte Chemie.

[10]  Dong‐Wan Kim,et al.  Sn-induced low-temperature growth of Ge nanowire electrodes with a large lithium storage capacity. , 2011, Nanoscale.

[11]  John B. Goodenough,et al.  Challenges for rechargeable batteries , 2011 .

[12]  G. Yushin,et al.  Nanosilicon‐Coated Graphene Granules as Anodes for Li‐Ion Batteries , 2011 .

[13]  Yong‐Sheng Hu,et al.  Electrode reactions of manganese oxides for secondary lithium batteries , 2010 .

[14]  Lin Gu,et al.  Reversible Storage of Lithium in Silver‐Coated Three‐Dimensional Macroporous Silicon , 2010, Advanced materials.

[15]  Yuping Wu,et al.  Mesoporous germanium as anode material of high capacity and good cycling prepared by a mechanochemical reaction , 2010 .

[16]  Shi Xue Dou,et al.  Enhanced reversible lithium storage in a nanosize silicon/graphene composite , 2010 .

[17]  Chang Ming Li,et al.  One-pot formation of SnO2 hollow nanospheres and alpha-Fe2O3@SnO2 nanorattles with large void space and their lithium storage properties. , 2009, Nanoscale.

[18]  Zaiping Guo,et al.  Ultra-fine porous SnO2 nanopowder prepared via a molten salt process: a highly efficient anode material for lithium-ion batteries , 2009 .

[19]  Dongqing Wu,et al.  Dispersion of Graphene Sheets in Organic Solvent Supported by Ionic Interactions , 2009 .

[20]  Min Gyu Kim,et al.  Nanocomposite of Amorphous Ge and Sn Nanoparticles as an Anode Material for Li Secondary Battery , 2009 .

[21]  Jin-Song Hu,et al.  Carbon Coated Fe3O4 Nanospindles as a Superior Anode Material for Lithium‐Ion Batteries , 2008 .

[22]  G. Cui,et al.  A Germanium–Carbon Nanocomposite Material for Lithium Batteries , 2008 .

[23]  E. Yoo,et al.  Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries. , 2008, Nano letters.

[24]  Steve W. Martin,et al.  Electrochemical behavior of Ge and GeX2 (X = O, S) glasses: Improved reversibility of the reaction of Li with Ge in a sulfide medium , 2008 .

[25]  Weiguo Song,et al.  Tin‐Nanoparticles Encapsulated in Elastic Hollow Carbon Spheres for High‐Performance Anode Material in Lithium‐Ion Batteries , 2008 .

[26]  Yi Cui,et al.  High capacity Li ion battery anodes using ge nanowires. , 2008, Nano letters.

[27]  J. Besenhard,et al.  Synthesis and Characterization of Nanoporous NiSi-Si Composite Anode for Lithium-Ion Batteries , 2007 .

[28]  C. Arean,et al.  Electrochemical Reaction Between Lithium and β-Quartz GeO2 , 2004 .

[29]  Mark N. Obrovac,et al.  Structural changes in silicon anodes during lithium insertion/extraction , 2004 .

[30]  Raouf O. Loutfy,et al.  Comparative studies of MCMB and CC composite as anodes for lithium-ion battery systems , 2003 .

[31]  M. Jaroniec,et al.  Gas adsorption characterization of ordered organic-inorganic nanocomposite materials , 2001 .

[32]  Jing-tang Zheng,et al.  Characterization of pore size distributions on carbonaceous adsorbents by DFT , 1999 .