Determination of Long Horizontal Borehole Height in Roofs and its Application to Gas Drainage

Accurately determining the height of the gas-guiding fracture zone in the overlying strata of the goaf is the key to find the height of the long horizontal borehole in the roof. In order to determine the height, in this study we chose the 6306 working face of Tangkou Coal Mine in China as a research example and used both the theoretical model and discrete element method (DEM) numerical simulation to find the height of the gas-guiding fracture zone and applied the height to drill a long horizontal borehole in the roof of the 6303 working face. Furthermore, the borehole was utilized to deep into the roof for coalbed methane drainage and the results were compared with conventional gas drainage measures from other aspects. The height of the gas-guiding fracture zone was found to be 48.57 m in theoretical model based on the bulk coefficient and the void ratio and to be 51.19 m in the DEM numerical simulation according to the temporal and spatial variation characteristics of porosity. Taking both the results of theoretical analysis and numerical simulation into consideration, we determined that gas-guiding fracture zone is 49.88 m high and applied it to drill a long horizontal borehole deep into the roof in the 6303 working face field. Compared with conventional gas drainage measures, we found that the long horizontal borehole has the high stability, high efficiency and strong adaptability for methane drainage.

[1]  W. Wenyu,et al.  Non-linear seepage characteristics and influential factors of water injection in gassy seams , 2018 .

[2]  Coupling between gas drainage and spontaneous combustion about close distance coal seams in U+II type workface , 2010 .

[3]  A. Kroepsch.  Horizontal drilling, changing patterns of extraction, and piecemeal participation: Urban hydrocarbon governance in Colorado , 2018, Energy Policy.

[4]  Justyna Swolkień,et al.  Methane drainage from roof strata using an overlying drainage gallery , 2014 .

[5]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[6]  Yang Li,et al.  Simulation of hydraulic fracturing using particle flow method and application in a coal mine , 2014 .

[7]  Sun Rong-jun.  Experimental research on using approximate horizontal long-hole instead of closed high extracted roadway to drain gas , 2005 .

[8]  Fangtian Wang,et al.  Implementation of underground longhole directional drilling technology for greenhouse gas mitigation in Chinese coal mines , 2012 .

[9]  C. Özgen Karacan,et al.  Coal mine methane: A review of capture and utilization practices with benefits to mining safety and to greenhouse gas reduction , 2011 .

[10]  Yifan Zhang,et al.  Recent developments in coal mine methane extraction and utilization in China: A review , 2016 .

[11]  Hua Guo,et al.  An assessment of mine methane mitigation and utilisation technologies , 2005 .

[12]  C. Ö. Karacan,et al.  Evaluation of the relative importance of coalbed reservoir parameters for prediction of methane inflow rates during mining of longwall development entries , 2008, Comput. Geosci..

[13]  Gang Wang,et al.  Height of the mining-induced fractured zone above a coal face , 2017 .

[14]  I. Palmer.  Coalbed methane completions: A world view , 2010 .

[15]  Robert E. Criss,et al.  Kinetic characteristics of debris flows as exemplified by field investigations and discrete element simulation of the catastrophic Jiweishan rockslide, China , 2017 .

[16]  Cheng Zhai,et al.  Experimental study on removing water blocking effect (WBE) from two aspects of the pore negative pressure and surfactants , 2016 .

[17]  Zhaofeng Wang,et al.  Application of directional boreholes for gas drainage of adjacent seams , 2016 .

[18]  Shimin Liu,et al.  Estimation of Pressure-Dependent Diffusive Permeability of Coal Using Methane Diffusion Coefficient: Laboratory Measurements and Modeling , 2016 .

[19]  V. Palchik,et al.  Bulking factors and extents of caved zones in weathered overburden of shallow abandoned underground workings , 2015 .