A High-Power-Density DC–DC Converter for Distributed PV Architectures

In order to maximize the solar energy harvesting capabilities, power converters for photovoltaic (PV) systems have to be designed for high efficiency, accurate maximum power point tracking (MPPT), and voltage/current performance. When many converters are used in distributed PV systems, power density also becomes an important factor since it allows for simpler system integration. In this paper, a high-power-density string-level MPPT dc-dc converter suitable for distributed medium- to large-scale PV installations is presented. A simple partial power processing topology that is implemented exclusively with silicon carbide devices provides high efficiency and high power density. A 3.5-kW, 100-kHz converter is designed and tested to verify the proposed methods.

[1]  Chung-Yuen Won,et al.  C-language based PV array simulation technique considering effects of partial shading , 2009, 2009 IEEE International Conference on Industrial Technology.

[2]  B. Mathur,et al.  Effect of Shading on Series and Parallel Connected Solar PV Modules , 2009 .

[3]  John S. Glaser,et al.  Recent advances in silicon carbide MOSFET power devices , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[4]  Yan Jiang,et al.  Dc-dc converter topology assessment for large scale distributed photovoltaic plant architectures , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[5]  Eduardo Lorenzo,et al.  Partial shadowing, MPPT performance and inverter configurations: observations at tracking PV plants , 2008 .

[6]  Massimo Vitelli,et al.  Distributed maximum power point tracking of photovoltaic arrays: Novel approach and system analysis , 2008, IEEE Transactions on Industrial Electronics.

[7]  John Glaser,et al.  Realizing the full potential of silicon carbide power devices , 2010, 2010 IEEE 12th Workshop on Control and Modeling for Power Electronics (COMPEL).

[8]  J. Bordonau,et al.  Topologies of single-phase inverters for small distributed power generators: an overview , 2004, IEEE Transactions on Power Electronics.

[9]  Paul Grunow,et al.  PV yield prediction for thin film technologies and the effect of input parameters inaccuracies , 2008 .

[10]  Leon M. Tolbert,et al.  Impact of SiC Devices on Hybrid Electric and Plug-In Hybrid Electric Vehicles , 2008, IEEE Transactions on Industry Applications.

[11]  J. Glaser,et al.  Direct comparison of silicon and silicon carbide power transistors in high-frequency hard-switched applications , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[12]  Roger A. Dougal,et al.  Parallel-Connected Solar PV System to Address Partial and Rapidly Fluctuating Shadow Conditions , 2009, IEEE Transactions on Industrial Electronics.

[13]  N. D. Kaushika,et al.  Energy yield simulations of interconnected solar PV arrays , 2003, 2003 IEEE Power Engineering Society General Meeting (IEEE Cat. No.03CH37491).

[14]  Tae-Jin Kim,et al.  A New Topology With High Efficiency Throughout All Load Range for Photovoltaic PCS , 2009, IEEE Transactions on Industrial Electronics.

[15]  Mohammed Agamy,et al.  A comparative study of central and distributed MPPT architectures for megawatt utility and large scale commercial photovoltaic plants , 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.

[16]  Aissa Chouder,et al.  Analysis Model of Mismatch Power Losses in PV Systems , 2009 .

[17]  Hung-Chi Chen,et al.  Analysis and Design of a Single-Stage Parallel AC-to-DC Converter , 2009, IEEE Transactions on Power Electronics.

[18]  V. Agarwal,et al.  MATLAB-Based Modeling to Study the Effects of Partial Shading on PV Array Characteristics , 2008, IEEE Transactions on Energy Conversion.

[19]  Peter Mark Jansson,et al.  Performance measurement of amorphous and monocrystalline silicon PV modules in Eastern U.S. Energy production versus ambient and module temperature , 2009, 2009 IEEE Instrumentation and Measurement Technology Conference.