Design and optimization of a flexible arrayed eddy current sensor

The inspection of the hollow axle inner surfaces is a key process to guarantee the safety of high-speed trains. A novel flexible arrayed eddy current sensor was developed to improve the reliability of the non-destructive testing of the hollow axle inner surfaces, whose main innovative aspect was the new design of excitation/sensing traces to achieve a differential and arrayed configuration. Only two independent excitation traces were used in the sensor to induce eddy currents, which can be detected by 16 differential sensing elements. The lift-off effects and the influence of the excitation frequency and geometrical parameters of the proposed sensor was investigated and presented in this paper. Finite element models were built to analyze the effects of each parameter on the sensor response amplitude. Experimental validations were conducted using a representative set of sensors. Results from experiments and simulations were consistent with each other, which showed that the sensor design can substantially suppress the lift-off effects and modifications of the studied parameters can substantially improve the sensor performance.

[1]  Tomasz Chady,et al.  Electromagnetic system for nondestructive evaluation of train hollow axles , 2013, 2013 Far East Forum on Nondestructive Evaluation/Testing: New Technology and Application.

[2]  Shengbo Jiao,et al.  Sensitivity boost of rosette eddy current array sensor for quantitative monitoring crack , 2016 .

[3]  Weihong Zhou,et al.  Fatigue Crack Length Sizing Using a Novel Flexible Eddy Current Sensor Array , 2015, Sensors.

[4]  Patrick C. Porter,et al.  New method uses conformable array to map external pipeline corrosion , 2004 .

[5]  David M Levinson,et al.  Accessibility Impacts of High Speed Rail , 2012 .

[6]  Hongguang Li,et al.  Guided wave propagation in high‐speed train axle and damage detection based on wave mode conversion , 2015 .

[7]  Young-Kil Shin,et al.  Signal characteristics of differential-pulsed eddy current sensors in the evaluation of plate thickness , 2009 .

[8]  Chen Guoming,et al.  Structural optimization of 2-D array probe for alternating current field measurement , 2007 .

[9]  Huang Songling,et al.  Development of differential probes in pulsed eddy current testing for noise suppression , 2007 .

[11]  Luis S. Rosado,et al.  Pulsed eddy currents testing using a planar matrix probe , 2016 .

[12]  Daniel Pereira,et al.  Modeling and Design Optimization of an Eddy Current Sensor for Superficial and Subsuperficial Crack Detection in Inconel Claddings , 2015, IEEE Sensors Journal.

[13]  Ryszard Sikora,et al.  Optimization of eddy-current sensor for multifrequency systems , 2003 .

[14]  Xianglin Chen,et al.  Flexible eddy current sensor array for proximity sensing , 2007 .

[15]  Salaheddine Harzallah,et al.  Nondestructive Technique for the Determination of Cracks Parameters by Eddy Current in Differential Mode , 2014 .

[16]  Y. Sheiretov,et al.  MWM-Array Sensors for In Situ Monitoring of High-Temperature Components in Power Plants , 2009, IEEE Sensors Journal.

[17]  M. Ruch,et al.  Multilayer planar rectangular coils for eddy current testing: Design considerations , 2009 .

[18]  M. Joung,et al.  Frequency optimization in the eddy current test for high purity niobium , 2017 .

[19]  Benoit Lepage,et al.  Development of a flexible cross-wound eddy current array probe , 2014 .

[20]  Chong-Oh Kim,et al.  The Pulsed Eddy Current Differential Probe to Detect a Thickness Variation in an Insulated Stainless Steel , 2010 .

[21]  S. Cantini,et al.  Advanced ultrasonic “Probability of Detection” curves for designing in-service inspection intervals , 2016 .

[22]  Qiang Chen,et al.  A Flexible Arrayed Eddy Current Sensor for Inspection of Hollow Axle Inner Surfaces , 2016, Sensors.

[23]  N. Sergeeva-Chollet,et al.  Development of flexible array eddy current probes for complex geometries and inspection of magnetic parts using magnetic sensors , 2013 .

[24]  Du Pingan,et al.  Optimization of an Eddy Current Sensor Using Finite Element Method , 2007, 2007 International Conference on Mechatronics and Automation.

[25]  Akira Nishimizu,et al.  Signal Evaluation System of Flexible Array Ect Probes for Inspecting Complexly Shaped Surfaces , 2011 .

[26]  Qi Wang,et al.  Frequency Optimization for Enhancement of Surface Defect Classification Using the Eddy Current Technique , 2016, Sensors.

[27]  Luis S. Rosado,et al.  Geometric optimization of a differential planar eddy currents probe for non-destructive testing , 2013 .