Computational fluid dynamics and interactive multiobjective optimization in the development of low-emission industrial boilers

A CFD-based model is applied to study emission formation in a bubbling fluidized bed boiler burning biomass. After the model is validated to a certain extent, it is used for optimization. There are nine design variables (nine distinct NH3 injections in the selective non-catalytic reduction process) and two objective functions (which minimize NO and NH3 emissions in flue gas). The multiobjective optimization problem is solved using the reference-point method involving an achievement scalarizing function. The interactive reference-point method is applied to generate Pareto optimal solutions. Two inherently different optimization algorithms, viz. a genetic algorithm and Powell's conjugate-direction method, are applied in the solution of the resulting optimization problem. It is shown that optimization connected with CFD is a promising design tool for combustion optimization. The strengths and weaknesses of the proposed approach and of the methods applied are discussed from the point of view of a complex real-world optimization problem.

[1]  C. Poloni,et al.  Hybridization of a multi-objective genetic algorithm, a neural network and a classical optimizer for a complex design problem in fluid dynamics , 2000 .

[2]  J. Dennis,et al.  A closer look at drawbacks of minimizing weighted sums of objectives for Pareto set generation in multicriteria optimization problems , 1997 .

[3]  Kaisa Miettinen,et al.  Nonlinear multiobjective optimization , 1998, International series in operations research and management science.

[4]  C. K. Tan,et al.  Use of artificial intelligence techniques for optimisation of co-combustion of coal with biomass , 2006 .

[5]  J.-Y. Chen,et al.  Selecting the optimum quasi-steady-state species for reduced chemical kinetic mechanisms using a genetic algorithm , 2006 .

[6]  P. Basu.  Combustion and gasification in fluidized beds , 2006 .

[7]  M. Ehrgott.  Multiobjective Optimization , 2008, AI Mag..

[8]  Zbigniew Michalewicz,et al.  Evolutionary Computation 2 : Advanced Algorithms and Operators , 2000 .

[9]  J. Toivanen,et al.  Genetic Algorithms in Shape Optimization of a Paper Machine Headbox , 2007 .

[10]  Tirupathi R. Chandrupatla.  An efficient quadratic fit—Sectioning algorithm for minimization without derivatives , 1998 .

[11]  A. Saario,et al.  Comparison of Global Ammonia Chemistry Mechanisms in Biomass Combustion and Selective Noncatalytic Reduction Process Conditions , 2008 .

[12]  Miroslav Radojevic,et al.  Reduction of nitrogen oxides in flue gases , 1998 .

[13]  Shyan-Shu Shieh,et al.  Constrained optimization of combustion in a simulated coal-fired boiler using artificial neural network model and information analysis , 2003 .

[14]  G. D. Raithby,et al.  A Finite-Volume Method for Predicting a Radiant Heat Transfer in Enclosures With Participating Media , 1990 .

[15]  Frank Blum,et al.  Towards an innovative virtual optimisation machine for the power industry , 2005 .

[16]  A. Saario,et al.  Combination of genetic algorithm and computational fluid dynamics in combustion process emission minimization , 2006 .

[17]  Robert W. Dibble,et al.  Optimization of homogeneous charge compression ignition with genetic algorithms , 2003 .

[18]  A. Saario,et al.  Effect of computational grid in industrial‐scale boiler modeling , 2009 .

[19]  T. Poinsot,et al.  Theoretical and numerical combustion , 2001 .

[20]  Daniel Ashlock,et al.  Optimization of heat transfer utilizing graph based evolutionary algorithms , 2003 .

[21]  James A. Miller,et al.  Mechanism and modeling of nitrogen chemistry in combustion , 1989 .

[22]  Andrzej Osyczka,et al.  Evolutionary Algorithms for Single and Multicriteria Design Optimization , 2001 .

[23]  T. F. Smith,et al.  Evaluation of Coefficients for the Weighted Sum of Gray Gases Model , 1982 .

[24]  B. Hjertager,et al.  On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion , 1977 .

[25]  Hao Zhou,et al.  Multi‐objective optimization of the coal combustion performance with artificial neural networks and genetic algorithms , 2005 .

[26]  Zhou Hao,et al.  Combining neural network and genetic algorithms to optimize low NOx pulverized coal combustion , 2001 .

[27]  T. Shih,et al.  A new k-ϵ eddy viscosity model for high reynolds number turbulent flows , 1995 .

[28]  W. P. Jones,et al.  Global reaction schemes for hydrocarbon combustion , 1988 .

[29]  Andrea Dadone,et al.  Efficient design optimization of duct-burners for combined-cycle and cogenerative plants , 2006 .

[30]  Ryoji Homma,et al.  Combustion process optimization by genetic algorithms: Reduction of NO2 emission via optimal postflame process , 2000 .

[31]  A. Wierzbicki.  A Mathematical Basis for Satisficing Decision Making , 1982 .

[32]  Jasbir S. Arora,et al.  Survey of multi-objective optimization methods for engineering , 2004 .

[33]  Sachin S. Sapatnekar,et al.  Design by optimization , 2009 .

[34]  Kim Dam-Johansen,et al.  Kinetics of the gas‐phase reaction between nitric oxide, ammonia and oxygen , 1992 .

[35]  Jared L. Cohon,et al.  Multiobjective programming and planning , 2004 .

[36]  Soteris A. Kalogirou,et al.  Artificial intelligence for the modeling and control of combustion processes: a review , 2003 .

[37]  Kyriakos C. Giannakoglou,et al.  Design of optimal aerodynamic shapes using stochastic optimization methods and computational intelligence , 2002 .

[38]  I. S. Ertesvåg,et al.  The Eddy Dissipation Turbulence Energy Cascade Model , 2000 .

[39]  Christopher W. Wilson,et al.  Genetic algorithms for optimisation of chemical kinetics reaction mechanisms , 2004 .

[40]  A. Brink,et al.  A Simplified Kinetic Rate Expression for Describing the Oxidation of Volatile Fuel-N in Biomass Combustion , 2001 .

[41]  Wolfgang Polifke,et al.  Optimization of rate coefficients for simplified reaction mechanisms with genetic algorithms , 1998 .

[42]  J. Koski.  Defectiveness of weighting method in multicriterion optimization of structures , 1985 .