A method to evaluate the three-dimensional roughness of fracture surfaces in brittle geomaterials.

Conventionally, the evaluation of fracture surface roughness in brittle geomaterials, such as concrete and rock, has been based on the measurement and analysis of two-dimensional profiles rather than three-dimensional (3D) surfaces. The primary reason for doing so was the lack of tools capable of making 3D measurements. However, in recent years, several optical and mechanical measurement tools have become available, which are capable of quickly and accurately producing high resolution point clouds defining 3D surfaces. This paper provides a methodology for evaluating the surface roughness and roughness anisotropy using these 3D surface measurements. The methodology is presented step-by-step to allow others to easily adopt and implement the process to analyze their own surface measurement data. The methodology is demonstrated by digitizing a series of concrete fracture surfaces and comparing the estimated 3D roughness parameters with qualitative observations and estimates of the well-known roughness coefficient, R(s).

[1]  E. Joseph Billo.  Excel for Scientists and Engineers: Numerical Methods , 2020 .

[2]  Giovanni Grasselli,et al.  Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters , 2003 .

[3]  T. Babadagli,et al.  A new computer-controlled surface-scanning device for measurement of fracture surface roughness , 2001 .

[4]  Julian P Seidel,et al.  A theoretical model for rock joints subjected to constant normal stiffness direct shear , 2002 .

[5]  L. Jing,et al.  The scale dependence of rock joint surface roughness , 2001 .

[6]  David A Lange,et al.  Relationship between Fracture Surface Roughness and Fracture Behavior of Cement Paste and Mortar , 1993 .

[7]  Zon-Yee Yang,et al.  An experimental study on the progressive shear behavior of rock joints with tooth-shaped asperities , 2000 .

[8]  M. Souley,et al.  Quantitative Parameters for Rock Joint Surface Roughness , 2000 .

[9]  Yasuaki Ichikawa,et al.  Roughness measurement of rock discontinuities using a confocal laser scanning microscope and the Fourier spectral analysis , 2004 .

[10]  Ian W. Johnston,et al.  A mechanistically-based model for rough rock joints , 1994 .

[11]  E. Joseph Billo,et al.  Excel for Scientists and Engineers , 2004 .

[12]  Development of New Peak Shear Strength Criterion for Anisotropic Rock Joints , 1999 .

[13]  S. M. El-Soudani,et al.  Profilometric analysis of fractures , 1978 .

[14]  Joëlle Riss,et al.  Binary Images of Sheared Rock Joints: Characterization of Damaged Zones , 1996 .

[15]  Giovanni Grasselli,et al.  Quantitative three-dimensional description of a rough surface and parameter evolution with shearing , 2002 .

[16]  A. M. Gokhale,et al.  A general method for estimation of fracture surface roughness: Part I. Theoretical aspects , 1990 .

[17]  N. Fardin,et al.  Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints , 2008 .

[18]  F. Lanaro.  A random field model for surface roughness and aperture of rock fractures , 2000 .

[19]  Erling Nordlund,et al.  An experimental study on the anisotropy and stress-dependency of the strength and deformability of rock joints , 1992 .

[20]  J. D. Frost,et al.  A Method for Measuring Geomembrane Surface Roughness , 1996 .

[21]  Andrew Squelch,et al.  Automatic detection of anisotropic features on rock surfaces , 2008 .

[22]  Claudio Scavia,et al.  Determination of contact areas in rock joints by X-ray computer tomography , 1999 .

[23]  J. C. Jaeger.  Friction of Rocks and Stability of Rock Slopes , 1971 .

[24]  Pinnaduwa Kulatilake,et al.  New peak shear strength criteria for anisotropic rock joints , 1995 .

[25]  D. Davidson.  Fracture surface roughness as a gauge of fracture toughness: Aluminium-particulate SiC composites , 1989 .

[26]  Nick Barton,et al.  Review of a new shear-strength criterion for rock joints , 1973 .

[27]  Ki-Won Ahn,et al.  A prototype of digital photogrammetric algorithm for estimating roughness of rock surface , 2004 .

[28]  G. Grasselli,et al.  Fracture Toughness and Fracture Roughness Interrelationship in Thermally treated Westerly Granite , 2009 .

[29]  In Mo Lee,et al.  Measurement of Rock Joint Roughness by 3D Scanner , 2006 .

[30]  Ove Stephansson,et al.  Application of a new in situ 3D laser scanner to study the scale effect on the rock joint surface roughness , 2004 .

[31]  Deborah Hopkins,et al.  Influence of fracture geometry on shear behavior , 2000 .

[32]  Ömer Aydan,et al.  The anisotropy of surface morphology characteristics of rock discontinuities , 1996 .

[33]  A. Garbacz,et al.  On the characterization of polymer concrete fracture surface , 2001 .

[34]  Giovanni Grasselli,et al.  Manuel Rocha Medal Recipient Shear Strength of Rock Joints Based on Quantified Surface Description , 2006 .

[35]  Angus M. Brown.  A step-by-step guide to non-linear regression analysis of experimental data using a Microsoft Excel spreadsheet , 2001, Comput. Methods Programs Biomed..