Influences of clearance angle and point angle on drilling performance of 2D Cf/SiC composites using polycrystalline diamond tools

[1]  Ming Chen,et al.  Hole exit quality and machined surface integrity of 2D Cf/SiC composites drilled by PCD tools , 2019, Journal of the European Ceramic Society.

[2]  Ming Chen,et al.  Experimental study on milling performance of 2D C/SiC composites using polycrystalline diamond tools , 2019, Ceramics International.

[3]  Hui Wang,et al.  Study of material removal mechanisms in grinding of C/SiC composites via single-abrasive scratch tests , 2019, Ceramics International.

[4]  T. Scott.  The influence of microstructure on the mechanical properties of polycrystalline diamond: A literature review , 2018 .

[5]  Pingfa Feng,et al.  Effects of tool vibration on fiber fracture in rotary ultrasonic machining of C/SiC ceramic matrix composites , 2017 .

[6]  Q. Fu,et al.  Bonding strength, thermal shock and oxidation resistance of interlocking (Zr,Hf)C-SiC/SiC double-layer coating for C/C composites , 2017 .

[7]  Jianxin Deng,et al.  Assessment in drilling of C/C-SiC composites using brazed diamond drills , 2017 .

[8]  Jianfu Zhang,et al.  Drilling induced tearing defects in rotary ultrasonic machining of C/SiC composites , 2017 .

[9]  Haifeng Cheng,et al.  Enhancing the fracture resistance of carbon fiber reinforced SiC matrix composites by interface modification through a simple fiber heat-treatment process , 2016 .

[10]  Jianfeng Huang,et al.  Fabrication of gradient C/C-SiC-MoSi2 composites with enhanced ablation performance , 2016 .

[11]  Yiguang Wang,et al.  Ablation behavior of C/SiC composites in plasma wind tunnel , 2016 .

[12]  Lihui Wang,et al.  Experimental evaluation of polycrystalline diamond (PCD) tool geometries at high feed rate in milling of titanium alloy TC11 , 2015 .

[13]  B. Lin,et al.  Investigations on grinding process of woven ceramic matrix composite based on reinforced fiber orientations , 2015 .

[14]  Kai Ding,et al.  Experimental studies on drilling tool load and machining quality of C/SiC composites in rotary ultrasonic machining , 2014 .

[15]  Ming Chen,et al.  A comparative evaluation of polycrystalline diamond drills in drilling high-strength T800S/250F CFRP , 2014 .

[16]  Yiğit Karpat,et al.  A mechanistic approach to investigate drilling of UD-CFRP laminates with PCD drills , 2014 .

[17]  Li Zhou,et al.  Drilling of SiCp/Al Metal Matrix Composites with Polycrystalline Diamond (PCD) Tools , 2012 .

[18]  Michael D. Barton,et al.  The Laser-Assisted Edge Milling of Ceramic Matrix Composites , 2009 .

[19]  Klaus Weinert,et al.  Machining Aspects for the Drilling of C/C‐SiC Materials , 2008 .

[20]  A. Mühlratzer,et al.  CMC Body Flaps for the X‐38 Experimental Space Vehicle , 2008 .

[21]  Yue Jiao,et al.  Rotary ultrasonic machining of ceramic matrix composites: feasibility study and designed experiments , 2005 .

[22]  Z. Rak.  A Process for Cf/SiC Composites Using Liquid Polymer Infiltration , 2004 .