3D printed metal molds for hot embossing plastic microfluidic devices.

Plastics are one of the most commonly used materials for fabricating microfluidic devices. While various methods exist for fabricating plastic microdevices, hot embossing offers several unique advantages including high throughput, excellent compatibility with most thermoplastics and low start-up costs. However, hot embossing requires metal or silicon molds that are fabricated using CNC milling or microfabrication techniques which are time consuming, expensive and required skilled technicians. Here, we demonstrate for the first time the fabrication of plastic microchannels using 3D printed metal molds. Through optimization of the powder composition and processing parameters, we were able to generate stainless steel molds with superior material properties (density and surface finish) than previously reported 3D printed metal parts. Molds were used to fabricate poly(methyl methacrylate) (PMMA) replicas which exhibited good feature integrity and replication quality. Microchannels fabricated using these replicas exhibited leak-free operation and comparable flow performance as those fabricated from CNC milled molds. The speed and simplicity of this approach can greatly facilitate the development (i.e. prototyping) and manufacture of plastic microfluidic devices for research and commercial applications.

[1]  Mandy B Esch,et al.  Influence of master fabrication techniques on the characteristics of embossed microfluidic channels. , 2003, Lab on a chip.

[2]  Jörg P Kutter,et al.  A cyclo olefin polymer microfluidic chip with integrated gold microelectrodes for aqueous and non-aqueous electrochemistry. , 2010, Lab on a chip.

[3]  K. Lu,et al.  Effect of particle size on three dimensional printed mesh structures , 2009 .

[4]  A. Mostafaei,et al.  Powder bed binder jet printed alloy 625: Densification, microstructure and mechanical properties , 2016 .

[5]  P. Kwon,et al.  Crater wear patterns analysis on multi-layer coated carbides using the wavelet transform , 2010 .

[6]  Dave Kim,et al.  Densification and Properties of 420 Stainless Steel Produced by Three-Dimensional Printing With Addition of Si3N4 Powder , 2009 .

[7]  Jesse Greener,et al.  Rapid, cost-efficient fabrication of microfluidic reactors in thermoplastic polymers by combining photolithography and hot embossing. , 2010, Lab on a chip.

[8]  Ian Papautsky,et al.  Institute of Physics Publishing Journal of Micromechanics and Microengineering Polymer Embossing Tools for Rapid Prototyping of Plastic Microfluidic Devices , 2022 .

[9]  Laurie Brown,et al.  Fabrication and characterization of poly(methylmethacrylate) microfluidic devices bonded using surface modifications and solvents. , 2006, Lab on a chip.

[10]  Ian Gibson,et al.  Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing , 2015 .

[11]  Philip J. Kitson,et al.  Configurable 3D-Printed millifluidic and microfluidic 'lab on a chip' reactionware devices. , 2012, Lab on a chip.

[12]  Nithyanand Kota,et al.  Fabrication of circular microfluidic channels by combining mechanical micromilling and soft lithography. , 2011, Lab on a chip.

[13]  Teodor Veres,et al.  High fidelity, high yield production of microfluidic devices by hot embossing lithography: rheology and stiction. , 2006, Lab on a chip.

[14]  Dong Sung Kim,et al.  Disposable integrated microfluidic biochip for blood typing by plastic microinjection moulding. , 2006, Lab on a chip.

[15]  Richard Novak,et al.  Rapid fabrication of nickel molds for prototyping embossed plastic microfluidic devices. , 2013, Lab on a chip.

[16]  David J Beebe,et al.  Rapid prototyping of arrayed microfluidic systems in polystyrene for cell-based assays. , 2011, Analytical chemistry.

[17]  C. Chua,et al.  Effects of layer thickness and binder saturation level parameters on 3D printing process , 2011 .

[18]  Albert Folch,et al.  Mail-order microfluidics: evaluation of stereolithography for the production of microfluidic devices. , 2014, Lab on a chip.

[19]  Michele Lanzetta,et al.  Improved surface finish in 3D printing using bimodal powder distribution , 2003 .

[20]  P. Kwon,et al.  Improving Structural Integrity with Boron-based Additives for 3D Printed 420 Stainless Steel , 2015 .

[21]  D. DeVoe,et al.  Bonding of thermoplastic polymer microfluidics , 2009 .

[22]  T. Desai,et al.  Survival, migration and differentiation of retinal progenitor cells transplanted on micro-machined poly(methyl methacrylate) scaffolds to the subretinal space. , 2007, Lab on a chip.

[23]  D Brabazon,et al.  3D printed metal columns for capillary liquid chromatography. , 2014, The Analyst.

[24]  David E. Hardt,et al.  Analysis and characterization of demolding of hot embossed polymer microstructures , 2011 .

[25]  L. P. Hromada,et al.  Low temperature bonding of PMMA and COC microfluidic substrates using UV/ozone surface treatment. , 2007, Lab on a chip.

[26]  Samuel K Sia,et al.  Commercialization of microfluidic point-of-care diagnostic devices. , 2012, Lab on a chip.

[27]  Hyeon-Bong Pyo,et al.  A polymer-based microfluidic device for immunosensing biochips. , 2003, Lab on a chip.

[28]  Holger Becker,et al.  Hot embossing as a method for the fabrication of polymer high aspect ratio structures , 2000 .

[29]  R. K. Jena,et al.  Effect of a CNT based composite micromold on the replication fidelity during the microfabrication of polymeric microfluidic devices , 2014 .

[30]  J. Peeling,et al.  Surface ozonation and photooxidation of polyethylene film , 1983 .

[31]  Po Ki Yuen,et al.  Hot embossing of plastic microfluidic devices using poly(dimethylsiloxane) molds , 2010 .

[32]  Nam-Trung Nguyen,et al.  Low-pressure, high-temperature thermal bonding of polymeric microfluidic devices and their applications for electrophoretic separation , 2006 .

[33]  H. Becker,et al.  Polymer microfluidic devices. , 2002, Talanta.

[34]  C. Klapperich,et al.  Mechanical and chemical analysis of plasma and ultraviolet-ozone surface treatments for thermal bonding of polymeric microfluidic devices. , 2007, Lab on a chip.

[35]  Q. Xia,et al.  Fabrication of sub-25 nm diameter pillar nanoimprint molds with smooth sidewalls using self-perfection by liquefaction and reactive ion etching , 2008, Nanotechnology.

[36]  J. Viovy,et al.  Fabrication of thermoplastics chips through lamination based techniques. , 2012, Lab on a chip.

[37]  H. Hsu,et al.  Microfluidic Synthesis of Microfibers for Magnetic-Responsive Controlled Drug Release and Cell Culture , 2012, PloS one.

[38]  Tianhong Cui,et al.  Fabrication of high-aspect-ratio polymer-based electrostatic comb drives using the hot embossing technique , 2003 .

[39]  Hsiao-Ping Chen,et al.  Thermoplastic microchannel fabrication using carbon dioxide laser ablation. , 2006, Journal of chromatography. A.

[40]  Daniel T Chiu,et al.  Fabrication of thermoset polyester microfluidic devices and embossing masters using rapid prototyped polydimethylsiloxane molds. , 2003, Lab on a chip.

[41]  Laurie Brown,et al.  Epoxy resins as stamps for hot embossing of microstructures and microfluidic channels , 2005 .

[42]  A. Offenhäusser,et al.  Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices. , 2016, Lab on a chip.

[43]  David J Beebe,et al.  Micromilling: a method for ultra-rapid prototyping of plastic microfluidic devices. , 2015, Lab on a chip.

[44]  Holger Becker,et al.  Fabrication of plastic microchips by hot embossing. , 2002, Lab on a chip.

[45]  Oliver Geschke,et al.  CO(2)-laser micromachining and back-end processing for rapid production of PMMA-based microfluidic systems. , 2002, Lab on a chip.

[46]  S. Soper,et al.  Complete plastic nanofluidic devices for DNA analysis via direct imprinting with polymer stamps. , 2011, Lab on a chip.