Study on the Localization Improvement of the Dead Reckoning using the INS Calibrated by the Fusion Sensor Network Information
暂无分享,去创建一个
In this paper, we suggest that how to improve an accuracy of mobile robot`s localization by using the sensor network information which fuses the machine vision camera, encoder and IMU sensor. The heading value of IMU sensor is measured using terrestrial magnetism sensor which is based on magnetic field. However, this sensor is constantly affected by its surrounding environment. So, we isolated template of ceiling using vision camera to increase the sensor`s accuracy when we use IMU sensor; we measured the angles by pattern matching algorithm; and to calibrate IMU sensor, we compared the obtained values with IMU sensor values and the offset value. The values that were used to obtain information on the robot`s position which were of Encoder, IMU sensor, angle sensor of vision camera are transferred to the Host PC by wireless network. Then, the Host PC estimates the location of robot using all these values. As a result, we were able to get more accurate information on estimated positions than when using IMU sensor calibration solely.
[1] Sang Bong Kim,et al. A Study on Map Building of Mobile Robot Using RFID Technology and Ultrasonic Sensor , 2010 .
[2] Su-Yong Kim,et al. Improved Ultrasonic Satellite System for the Localization of Mobile Robots , 2011 .
[3] Dariusz Pazderski,et al. Modeling and control of a 4-wheel skid-steering mobile robot , 2004 .