Computed-torque method for the control of a 2 DOF orthosis actuated through pneumatic artificial muscles: a specific case for the rehabilitation of the lower limb

In this paper we give a new control model based on the so called computed-torque method for the control of a 2 degrees of freedom orthosis for the rehabilitation of the lower limb, the AIRGAIT exoskeleton's leg orthosis. The actuation of the AIRGAIT is made through self-made pneumatic muscles. For this reason this work starts with the static and dynamic characterization of our pneumatic muscles. The followed approach is based on the analytical description of the system. For this, we describe the pneumatic muscles behaviour with an easy-invertible polynomial fit function in order to model its non-linear trend. We give a geometrical model of the mechanical system to compute the length between the attachments of the pneumatic muscles to the structure for every angles assumed by the two joints. We evaluate through Newton-Euler equation the couples at the joints for each values of the angles. At last we show some validation tests in order to characterize the functioning of the proposed control model on the actuation of the orthosis.

[1]  Dava J. Newman,et al.  Characterization of a lower-body exoskeleton for simulation of space-suited locomotion , 2008 .

[2]  Flavio Prattico,et al.  Couple Control Model Implementation on Antagonistic Mono- and Bi-Articular Actuators , 2014, ArXiv.

[3]  Alexander Hošovský,et al.  Dinamičko modeliranje aktuatora na bazi pneumatskog mišića s jednim stupnjem slobode za industrijsku primjenu , 2012 .

[4]  F. Amato,et al.  Robust and optimal tracking control for manipulator arm driven by pneumatic muscle actuators , 2013, 2013 IEEE International Conference on Mechatronics (ICM).

[5]  Dan B. Marghitu.  Mechanisms and Robots Analysis with MATLAB , 2009 .

[6]  Ming-Kun Chang,et al.  An adaptive self-organizing fuzzy sliding mode controller for a 2-DOF rehabilitation robot actuated by pneumatic muscle actuators , 2010 .

[7]  Yu Zhang,et al.  Modeling and control of a curved pneumatic muscle actuator for wearable elbow exoskeleton , 2008 .

[8]  Tae-Yong Choi,et al.  Position and Compliance Control of a Pneumatic Muscle Actuated Manipulator for Enhanced Safety , 2011, IEEE Transactions on Control Systems Technology.

[9]  Kyoung Kwan Ahn,et al.  Nonlinear PID control to improve the control performance of 2 axes pneumatic artificial muscle manipulator using neural network , 2006 .

[10]  Filippo Petroni,et al.  A new hybrid infrared-ultrasonic electronic travel aids for blind people , 2013 .

[11]  Fumio Miyazaki,et al.  Novel equilibrium-point control of agonist-antagonist system with pneumatic artificial muscles: II. Application to EMG-based human-machine interface for an elbow-joint system , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[12]  Shin Ichiroh Yamamoto,et al.  Development of Gait Training System Powered by Antagonistic Mono-and Bi-Articular Actuators Using Contraction Model Control Scheme , 2013 .

[13]  Shin-ichiroh Yamamoto,et al.  Design and Evaluation of the AIRGAIT Exoskeleton: Leg Orthosis Control for Assistive Gait Rehabilitation , 2013, J. Robotics.

[14]  Makoto Sasaki,et al.  Development of a 3DOF mobile exoskeleton robot for human upper-limb motion assist , 2008, Robotics Auton. Syst..

[15]  Patrick van der Smagt,et al.  Antagonism for a Highly Anthropomorphic Hand–Arm System , 2008, Adv. Robotics.

[16]  P. Fisette,et al.  Symbolic generation of large multibody system dynamic equations using a new semi-explicit Newton/Euler recursive scheme , 1996 .

[17]  Z. Situm,et al.  Design and control of a manipulator arm driven by pneumatic muscle actuators , 2008, 2008 16th Mediterranean Conference on Control and Automation.