Particle Size and Number Emissions from RCCI with Direct Injections of Two Fuels

[1]  Isaac W. Ekoto,et al.  Sources of UHC Emissions from a Light-Duty Diesel Engine Operating in a Partially Premixed Combustion Regime , 2009 .

[2]  Thorsten Raatz,et al.  Examination of Particle Size Distribution of Homogeneous and Conventional Diesel Combustion , 2001 .

[3]  Hiroshi Sono,et al.  PCCI Operation with Early Injection of Conventional Diesel Fuel , 2005 .

[4]  Stephen Ciatti,et al.  Sizes, graphitic structures and fractal geometry of light-duty diesel engine particulates , 2003 .

[5]  Ricardo Novella,et al.  Increased particle emissions from early fuel injection timing Diesel low temperature combustion , 2012 .

[6]  R. A. White,et al.  Smokeless Combustion within a Small-Bore HSDI Diesel Engine Using a Narrow Angle Injector , 2007 .

[7]  Ricardo Novella,et al.  Particle Size Distribution Measurements from Early to Late Injection Timing Low Temperature Combustion in a Heavy Duty Diesel Engine , 2010 .

[8]  D. Splitter,et al.  Fuel reactivity controlled compression ignition (RCCI): a pathway to controlled high-efficiency clean combustion , 2011 .

[9]  Rolf D. Reitz,et al.  Investigation of Fuel Reactivity Stratification for Controlling PCI Heat-Release Rates Using High-Speed Chemiluminescence Imaging and Fuel Tracer Fluorescence. , 2012 .

[10]  A. De Filippo,et al.  Diesel nucleation mode particles: semivolatile or solid? , 2008, Environmental science & technology.

[11]  Magín Lapuerta,et al.  Effect of engine operating conditions on the size of primary particles composing diesel soot agglomerates , 2007 .

[12]  R. A. White,et al.  Effects of injection angles on combustion processes using multiple injection strategies in an HSDI diesel engine , 2008 .

[13]  K. Akihama,et al.  Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature , 2001 .

[14]  C. Westbrook,et al.  Diesel combustion: an integrated view combining laser diagnostics, chemical kinetics, and empirical validation , 1999 .

[15]  Juhun Song,et al.  Effects of exhaust gas recirculation on diesel particulate matter morphology and NO x emissions , 2008 .

[16]  M. Musculus,et al.  Multiple Simultaneous Optical Diagnostic Imaging of Early-Injection Low-Temperature Combustion in , 2006 .

[17]  J. Eng,et al.  Characterization of Pressure Waves in HCCI Combustion , 2002 .

[18]  Dennis N. Assanis,et al.  Evaluation of Diesel Oxidation Catalyst Conversion of Hydrocarbons and Particulate Matter from Premixed Low Temperature Combustion of Biodiesel , 2011 .

[19]  Shijin Shuai,et al.  Combustion and Emission Characteristics of a PPCI Engine Fuelled with Dieseline , 2012 .

[20]  D. Kittelson.  Engines and nanoparticles: a review , 1998 .

[21]  Vitaly Y. Prikhodko,et al.  Emission Characteristics of a Diesel Engine Operating with In-Cylinder Gasoline and Diesel Fuel Blending , 2010 .

[22]  Dennis N. Assanis,et al.  Thermodynamic sweet spot for high-efficiency, dilute, boosted gasoline engines , 2013 .

[23]  Hiroshi Sono,et al.  PCCI Operation with Fuel Injection Timing Set Close to TDC , 2006 .

[24]  Christopher P. Kolodziej,et al.  Comprehensive Characterization of Particulate Emissions from Advanced Diesel Combustion , 2007 .

[25]  Hajime Shimizu,et al.  Characteristics of Diesel Combustion in Low Oxygen Mixtures with Ultra-High EGR , 2006 .

[26]  Hans-Erik Ångström,et al.  Partially pre-mixed auto-ignition of gasoline to attain low smoke and low NOx at high load in a compression ignition engine and comparison with a diesel fuel , 2007 .

[27]  Y. Goto,et al.  Thermal Conditioning of Exhaust Gas: Potential for Stabilizing Diesel Nano-Particles , 2005 .

[28]  Gilles Bruneaux,et al.  On the origin of Unburned Hydrocarbon Emissions in a Wall Guided, Low NOx Diesel Combustion System , 2007 .

[29]  John E. Dec,et al.  Boosted HCCI - Controlling Pressure-Rise Rates for Performance Improvements using Partial Fuel Stratification with Conventional Gasoline , 2011 .

[30]  Dennis N. Assanis,et al.  Comparison of Filter Smoke Number and Elemental Carbon Mass From Partially Premixed Low Temperature Combustion in a Direct-Injection Diesel Engine , 2010 .

[31]  John M. E. Storey,et al.  Exhaust chemistry of low-NOx, low-PM diesel combustion , 2004 .

[32]  Takeyuki Kamimoto,et al.  High Combustion Temperature for the Reduction of Particulate in Diesel Engines , 1988 .

[33]  M. Maricq.  Chemical characterization of particulate emissions from diesel engines: A review , 2007 .

[34]  Rolf D. Reitz,et al.  Effect of Compression Ratio and Piston Geometry on RCCI Load Limits and Efficiency , 2012 .

[35]  D. Foster,et al.  Characterization of Particulate Morphology, Nanostructures, and Sizes in Low-Temperature Combustion with Biofuels , 2012 .

[36]  Charles J. Mueller,et al.  Early Direct-Injection, Low-Temperature Combustion of Diesel Fuel in an Optical Engine Utilizing a 15-Hole, Dual-Row, Narrow-Included-Angle Nozzle , 2008 .

[37]  J. Dec.  A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging* , 1997 .

[38]  Ricardo Novella,et al.  Effect of Intake Oxygen Concentration on Particle Size Distribution Measurements from Diesel Low Temperature Combustion , 2011 .

[39]  D. Kittelson,et al.  The influence of dilution conditions on diesel exhaust particle size distribution measurements , 1999 .