Flight research on natural laminar flow applications

Natural laminar flow (NLF) is clearly one of the most potentially attractive drag reduction technologies by virtue of its relative simplicity. NLF is achieved passively, that is, by design of surface shapes to produce favorable pressure gradients. However, it is not without its challenges and limitations. This chapter describes the significant challenges to achieving and maintaining NLF and documents certain of the limitations for practical applications. A brief review of the history and of more recent NLF flight experiments is given, followed by a summary of lessons learned which are pertinent to future applications. The chapter also summarizes important progress in test techniques, particularly in flow visualization and hot-film techniques for boundary-layer measurements in flight.

[1]  Robert R. Meyer,et al.  F-14 VSTFE and results of the cleanup flight test program , 1987 .

[2]  B. J. Holmes.  Progress in natural laminar flow research , 1984 .

[3]  J Stuper.  Investigation of boundary layers on an airplane wing in free flight , 1934 .

[4]  E. C. Hastings,et al.  Flight research on natural laminar flow nacelles - A progress report , 1986 .

[5]  Cynthia C. Croom,et al.  The Laminar Separation Sensor: An Advanced Transition Measurement Method for Use in Wind Tunnels and Flight , 1987 .

[6]  Clifford J. Obara,et al.  Flight-measured streamwise disturbance instabilities in laminar flow , 1990 .

[7]  W. S. Coleman.  ROUGHNESS DUE TO INSECTS , 1961 .

[8]  L. L. Steers,et al.  F-111 TACT natural laminar flow glove flight results , 1981 .

[9]  Itiro Tani.  On the design of airfoils in which the transition of the boundary layer is delayed , 1952 .

[10]  C. J. Wenzinger.  Wind-tunnel investigation of several factors affecting the performance of a high-speed pursuit airplane with air-cooled radial engine , 1941 .

[11]  John A. Zalovcik,et al.  Flight Investigation at High Speeds of Profile Drag of Wing of a P-47D Airplane Having Production Surfaces Covered with Camouflage Paint , 1946 .

[12]  Bruce J. Holmes,et al.  Manufacturing tolerances for natural laminar flow airframe surfaces , 1985 .

[13]  Clifford J. Obara,et al.  Status report on a natural laminar-flow nacelle flight experiment , 1987 .

[14]  A. H. Nayfeh,et al.  Stability of compressible boundary layers over a smooth backward-facing step , 1989 .

[15]  J. A. Zalovcik,et al.  Flight investigation of boundary-layer transition and profile drag of an experimental low-drag wing installed on a figher-type airplane , 1945 .

[16]  William S. Saric,et al.  Experiments on the Stability of Nonlinear Waves in a Boundary Layer , 1980 .

[17]  Handel Davies.  Some Aspects of Flight Research , 1951 .

[18]  B. J. Holmes,et al.  An arrayed hot-film sensor for detection of laminar boundary-layer flow disturbance spatial characteristics , 1988 .

[19]  M. B. Bragg,et al.  The role of airfoil geometry in minimizing the effect of insect contamination of laminar flow sections , 1984 .

[20]  Bruce J. Holmes,et al.  Advanced boundary layer transition measurement methods for flight applications , 1986 .

[21]  W. D. Beasley,et al.  Experimental Results for a Flapped Natural-laminar-flow Airfoil with High Lift/drag Ratio , 1984 .

[22]  Bruce J. Holmes,et al.  An Investigation of the Effects of the Propeller Slipstream on a Laminar Wing Boundary Layer , 1985 .

[23]  M. J. Hoffman,et al.  Flight investigation of natural laminar flow on the Bellanca Skyrocket II , 1983 .

[24]  K. H. Horstmann,et al.  Flight and wind-tunnel investigations on boundary-layer transition , 1990 .

[25]  W. H. Wentz,et al.  Natural laminar flow flight experiments on a swept-wing business jet , 1984 .

[26]  B. J. Holmes,et al.  Flight Evaluation of an Insect Contamination Protection System for Laminar Flow Wings , 1985 .

[27]  Albert L. Braslow,et al.  Simplified method for determination of critical height of distributed roughness particles for boundary-layer transition at Mach numbers from 0 to 5 , 1958 .

[28]  B. J. Holmes,et al.  In-flight flow visualization using infrared imaging , 1988 .

[29]  Ali H. Nayfeh,et al.  Effect of bulges on the stability of boundary layers , 1988 .

[30]  D. M. Bushnell,et al.  Survey and bibliography on attainment of laminar flow control in air using pressure gradient and suction, volume 1 , 1979 .

[31]  David R. Ellis,et al.  Flight Test Investigations of a Wing Designed for Natural Laminar Flow , 1987 .

[32]  L. P. Yip,et al.  Wind-tunnel investigation of a full-scale canard-configured general aviation aircraft , 1982 .

[33]  Clifford J. Obara.  Sublimating Chemical Technique for Boundary-Layer Flow Visualization in Flight Testing , 1988 .

[34]  C. P. van Dam,et al.  Boundary-layer transition effects on airplane stability and control , 1988 .

[35]  G. R. Hall,et al.  Interaction of the wake from bluff bodies with an initially laminar boundary layer. , 1966 .

[36]  G. R. Hall.  On the Mechanics of Transition Produced by Particles Passing Through an Initially Laminar Boundary Layer and the Estimated Effect on the LFC Performance of the X-21 Aircraft , 1964 .

[37]  G Swift,et al.  A study of the prediction of cruise noise and laminar flow control noise criteria for subsonic air transports , 1979 .

[38]  B. Melvill Jones,et al.  Flight Experiments on the Boundary Layer , 1938 .

[39]  Joseph Bicknell,et al.  Comparison of Profile-Drag and Boundary-Layer Measurements Obtained in Flight and in the Full-Scale Wind Tunnel , 1939 .

[40]  W. H. Wentz,et al.  Further results of natural laminar flow flight test experiments , 1985 .

[41]  Bruce J. Holmes,et al.  Advances in Flow Visualization Using Liquid-Crystal Coatings , 1987 .

[42]  Gregory S. Manuel,et al.  A flight test investigation of certification requirements for laminar-flow general aviation airplanes , 1990 .

[43]  Ali H. Nayfeh,et al.  Effect of a bulge on the secondary instability of boundary layers , 1987 .

[44]  Joseph Bicknell,et al.  Determination of the profile drag of an airplane wing in flight at high Reynolds numbers , 1939 .

[45]  John A. Zalovcik.  Profile-Drag Coefficients of Conventional and Low-Drag Airfoils as Obtained in Flight , 1944 .

[46]  B. J. Holmes,et al.  Flight-measured laminar boundary-layer transition phenomena including stability theory analysis , 1985 .

[47]  B. J. Holmes,et al.  Liquid crystals for high-altitude in-flight boundary layer flow visualization , 1986 .

[48]  John A. Zalovcik.  Flight Investigation of Boundary-Layer and Profile-Drag Characteristics of Smooth Wing Sections of a P-47D Airplane , 1945 .

[49]  H. Schlichting.  Boundary Layer Theory , 1955 .

[50]  Ali H. Nayfeh.  Stability of compressible boundary layers , 1989 .

[51]  Robert C Platt.  A flight investigation of the boundary-layer characteristics and profile drag of the NACA 35-215 laminar-flow airfoil at high Reynolds numbers , 1941 .

[52]  C. P. van Dam,et al.  EFFECTS OF COMPRESSIBILITY ON DESIGN OF SUBSONIC NATURAL LAMINAR FLOW FUSELAGES , 1986 .

[53]  R. H. Plascott.  Profile Drag Measurements on Hurricane II Z.3687 Fitted with Special Wings of "Low Drag" Section built by Armstrong Whitworth Aircraft Ltd. , 1946 .

[54]  J. Mount,et al.  Development of an active laminar flow nacelle , 1985 .