论文信息 - Discrimination between strain and temperature with a single fiber Bragg grating

Discrimination between strain and temperature with a single fiber Bragg grating

A new scheme is proposed for simultaneous strain and temperature measurement with a single‐fiber Bragg grating. The grating sensor was written on the splice joint between two fibers and has two resonance peaks because of the different refractive index between the two fibers. By bonding one section of the grating onto the substrate of large thermal expansion coefficient, the two resonance peaks exhibit different strain and temperature response and can thus be used for strain/temperature discrimination. © 2002 Wiley Periodicals, Inc. Microwave Opt Technol Lett 33: 200–202, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.10275

H. Tam | C. Choy | M. Demokan | B. Guan | H. Chan

[1] John P. Dakin,et al. Discrimination between strain and temperature effects using dual-wavelength fibre grating sensors , 1994 .

[2] A J Rogers,et al. Simultaneous strain and temperature sensing with photogenerated in-fiber gratings. , 1995, Optics letters.

[3] Ralph P. Tatam,et al. Simultaneous independent temperature and strain measurement using in-fibre Bragg grating sensors , 1996 .

[4] G.M. Williams,et al. Hybrid fiber Bragg grating/long period fiber grating sensor for strain/temperature discrimination , 1996, IEEE Photonics Technology Letters.

[5] R O Claus,et al. Simultaneous strain and temperature measurement with long-period gratings. , 1997, Optics letters.

[6] J. Lee,et al. Simultaneous measurement of strain and temperature by use of a single-fiber Bragg grating and an erbium-doped fiber amplifier. , 1999, Applied Optics.

[7] Hwa-Yaw Tam,et al. Simultaneous strain and temperature measurement using a single fibre Bragg grating , 2000 .

[8] Hwa-Yaw Tam,et al. Simultaneous strain and temperature measurement using a superstructure fiber Bragg grating , 2000 .