Experimental Characterization of Pantograph Arcs and Transient Conducted Phenomena in DC Railways
暂无分享,去创建一个
[1] P. Janiszewski,et al. Time domain analysis of harmonic interactions between traction vehicle and DC supply , 1995 .
[2] P. Pozzobon,et al. A frequency domain model for 3 kV DC traction DC-side resonance identification , 1995 .
[3] Andrea Mariscotti,et al. Reference curves of the pantograph impedance in DC railway systems , 2000, 2000 IEEE International Symposium on Circuits and Systems. Emerging Technologies for the 21st Century. Proceedings (IEEE Cat No.00CH36353).
[4] B. Tellini,et al. Conducted and radiated interference measurements in the line-pantograph system , 2000, Proceedings of the 17th IEEE Instrumentation and Measurement Technology Conference [Cat. No. 00CH37066].
[5] Luca Sani,et al. Phototube sensor for monitoring the quality of current collection on overhead electrified railways , 2001 .
[6] Andrea Mariscotti,et al. Synthesis of line impedance expressions for railway traction systems , 2003, IEEE Trans. Veh. Technol..
[7] H.-J. Koglin,et al. On the modeling of long arc in still air and arc resistance calculation , 2004, IEEE Transactions on Power Delivery.
[8] A. Mariscotti,et al. Voltage sag detection based on rectified voltage processing , 2004, IEEE Transactions on Power Delivery.
[9] J. L. Guardado,et al. An improved arc model before current zero based on the combined Mayr and Cassie arc models , 2005, IEEE Transactions on Power Delivery.
[10] Andrea Mariscotti,et al. Experimental results on low rail-to-rail conductance values , 2005, IEEE Transactions on Vehicular Technology.
[11] P. Boffi,et al. Optical Fiber Sensors to Measure Collector Performance in the Pantograph-Catenary Interaction , 2009, IEEE Sensors Journal.
[12] R. Thottappillil,et al. Pantograph Arcing in Electrified Railways—Mechanism and Influence of Various Parameters—Part I: With DC Traction Power Supply , 2009, IEEE Transactions on Power Delivery.
[13] A. Collina,et al. A procedure for the wear prediction of collector strip and contact wire in pantograph–catenary system , 2009 .
[14] Morris Brenna,et al. Sensitivity Analysis of the Constructive Parameters for the 2$\,\times\,$ 25-kV High-Speed Railway Lines Planning , 2010, IEEE Transactions on Power Delivery.
[15] Andrea Mariscotti,et al. Modeling of Audiofrequency Track Circuits for Validation, Tuning, and Conducted Interference Prediction , 2010, IEEE Transactions on Intelligent Transportation Systems.
[16] Alexis Kwasinski,et al. A DC Arc Model for Series Faults in Low Voltage Microgrids , 2012, IEEE Transactions on Smart Grid.
[17] A. Mariscotti,et al. Time and frequency characterization of radiated disturbances in telecommunication bands due to pantograph arcing , 2012, 2012 IEEE International Instrumentation and Measurement Technology Conference Proceedings.
[18] Andrea Mariscotti. Characterization of power quality transient phenomena of DC railway traction supply , 2012 .
[19] Marc Heddebaut,et al. Classification of Transient EM Noises Depending on their Effect on the Quality of GSM-R Reception , 2013, IEEE Transactions on Electromagnetic Compatibility.
[20] M. Steczek,et al. Analysis of input impedance frequency characteristic of electric vehicles with a.c. motors supplied by 3 kV DC system for reducing disturbances in signalling track circuits caused by the harmonics in the vehicle's current , 2013 .
[21] Andrea Mariscotti,et al. Time and frequency characterization of radiated disturbance in telecommunication bands due to pantograph arcing , 2013 .
[22] Marco Raugi,et al. Arc detection in pantograph-catenary systems by the use of support vector machines-based classification , 2014 .
[23] Parmod Kumar,et al. Sensitivity Analysis of Characteristic Parameters of Railway Electric Traction System , 2014 .
[24] Bjorn Neubauer,et al. EMC analysis including receiver characteristics - pantograph arcing and the instrument landing system , 2015, 2015 IEEE International Symposium on Electromagnetic Compatibility (EMC).
[25] Václav Smídl,et al. Improved Stability of DC Catenary Fed Traction Drives Using Two-Stage Predictive Control , 2015, IEEE Transactions on Industrial Electronics.
[26] A. K. Sadigh,et al. Fast and precise voltage sag detection method for dynamic voltage restorer (DVR) application , 2016 .
[27] Guangning Wu,et al. Evolution of the electrical contact of dynamic pantograph–catenary system , 2016 .
[28] Guangning Wu,et al. Characteristics of the Sliding Electric Contact of Pantograph/Contact Wire Systems in Electric Railways , 2017 .
[29] Huang Ke,et al. Extended black-box model of pantograph arcing considering varying pantograph detachment distance , 2017, 2017 IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific).
[30] T. Tarasiuk. Simple methods of voltage dip tracking– case study , 2017 .
[31] Carmine Landi,et al. Pantograph-to-OHL Arc: Conducted Effects in DC Railway Supply System , 2018, 2018 IEEE 9th International Workshop on Applied Measurements for Power Systems (AMPS).
[32] A. Sawicki. Arc models for simulating processes in circuits with a SF6 circuit breaker , 2019 .
[33] Guangning Wu,et al. Pantograph–Catenary Arcing Detection Based on Electromagnetic Radiation , 2019, IEEE Transactions on Electromagnetic Compatibility.
[34] M. Luiso,et al. Discussion on DC and AC Power Quality Assessment in Railway Traction Supply Systems , 2019, 2019 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).
[35] Tsuyoshi Murata,et al. {m , 1934, ACML.
[36] Domenico Giordano,et al. Filter Transients onboard DC Rolling Stock and Exploitation for the Estimate of the Line Impedance , 2020, 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).