Experimental validation of a novel smart electromechanical tuned mass damper beam device

Abstract This paper validates the novel concept of utilising piezoelectric vibration energy harvesting (PVEH) beams as a tuned mass damper (TMD)—which suppresses a particular vibration mode of a generic host structure over a broad band of excitation frequencies. The proposed device comprises a pair of bimorphs shunted by a resistor, capacitor and inductor connected in various alternative circuit configurations. A benchmark for the performance is established through Den Hartog's theory for the optimal damping of a classical TMD. Experimental results demonstrate that such optimal damping is equivalently generated by the PVEH effect for appropriately tuned circuitry. These results correlate reasonably well with the results of a theoretical analysis introduced in a previous paper. The proposed TMD beam device combines the relative advantages of the classical (‘mechanical’) TMD and the shunted piezoelectric patch (‘electrical’ vibration absorber), presenting the prospect of a functionally more readily-adaptable class of ‘electromechanical’ tuned vibration absorbers. Moreover, with further development, this dual PVEH/TMD beam device holds the potential of simultaneous energy storage.

[1]  George P. Simon,et al.  Characterization of mechanical vibration damping by piezoelectric materials , 1996 .

[2]  Philip Bonello,et al.  Modeling and Analysis of Piezoelectric Energy Harvesting Beams Using the Dynamic Stiffness and Analytical Modal Analysis Methods , 2011 .

[3]  C. H. Park,et al.  Dynamics modelling of beams with shunted piezoelectric elements , 2003 .

[4]  David J. Ewins,et al.  Modal Testing: Theory, Practice, And Application , 2000 .

[5]  Emad Gad,et al.  Optimum design for passive tuned mass dampers using viscoelastic materials , 2007 .

[6]  S. O. Reza Moheimani,et al.  Optimization and implementation of multimode piezoelectric shunt damping systems , 2002 .

[7]  S. O. Reza Moheimani,et al.  Control orientated synthesis of high-performance piezoelectric shunt impedances for structural vibration control , 2005, IEEE Transactions on Control Systems Technology.

[8]  Philip Bonello,et al.  Analysis of an energy harvesting piezoelectric beam with energy storage circuit , 2012 .

[9]  Daniel J. Inman,et al.  An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations , 2009 .

[10]  J. P. Hartog.  Mechanical vibration / J.P. Den Hartog , 1956 .

[11]  A. R. Beard,et al.  Adaptive tuned vibration absorbers: Tuning laws, tracking agility, sizing, and physical implementations , 1994 .

[12]  Joseph J. Hollkamp,et al.  A self-tuning piezoelectric vibration absorber , 1994 .

[13]  Philip Bonello,et al.  Vibration control using a beam-like adaptive tuned vibration absorber with an actuator-incorporated mass element , 2009 .

[14]  Philip Bonello,et al.  A theoretical study of a smart electromechanical tuned mass damper beam device , 2012 .

[15]  Ryan L. Harne,et al.  Concurrent attenuation of, and energy harvesting from, surface vibrations: experimental verification and model validation , 2012 .

[16]  Philip Bonello,et al.  Experimental validation of a distributed parameter piezoelectric bimorph cantilever energy harvester , 2010 .

[17]  Nesbitt W. Hagood,et al.  Damping of structural vibrations with piezoelectric materials and passive electrical networks , 1991 .

[18]  Michael J. Brennan,et al.  IMPROVING THE PERFORMANCE OF A VIBRATION NEUTRALISER BY ACTIVELY REMOVING DAMPING , 1999 .