Influences of polysilicic acid in Al13 species on floc properties and membrane fouling in coagulation/ultrafiltration hybrid process

[1]  B. Gao,et al.  Influence of floc size and structure on membrane fouling in coagulation-ultrafiltration hybrid process--the role of Al13 species. , 2011, Journal of hazardous materials.

[2]  Marco Stoller,et al.  Effective fouling inhibition by critical flux based optimization methods on a NF membrane module for olive mill wastewater treatment , 2011 .

[3]  Tong Sun,et al.  Effect of silicon dose on preparation and coagulation performance of poly-ferric-aluminum-silicate-sulfate from oil shale ash. , 2010 .

[4]  B. Gao,et al.  Effect of shear force and solution pH on flocs breakage and re-growth formed by nano-Al(13) polymer. , 2010, Water research.

[5]  M. Bravi,et al.  Critical flux analyses on differently pretreated olive vegetation waste water streams: Some case studies , 2010 .

[6]  Chihpin Huang,et al.  The origin of Al(OH)(3)-rich and Al(13)-aggregate flocs composition in PACl coagulation. , 2009, Water research.

[7]  M. Stoller.  On the effect of flocculation as pretreatment process and particle size distribution for membrane fouling reduction , 2009 .

[8]  B. Gao,et al.  Characterization of floc size, strength and structure in various aluminum coagulants treatment. , 2009, Journal of colloid and interface science.

[9]  A. Zouboulis,et al.  Polyaluminium silicate chloride - a systematic study for the preparation and application of an efficient coagulant for water or wastewater treatment. , 2009, Journal of hazardous materials.

[10]  B. Gao,et al.  Comparison of coagulation behavior and floc structure characteristic of different polyferric-cationic polymer dual-coagulants in humic acid solution. , 2009, Water research.

[11]  Dongsheng Wang,et al.  Coagulation behavior of Al(13) aggregates. , 2008, Water research.

[12]  T. Waite,et al.  Characterization of floc size and structure under different monomer and polymer coagulants on microfiltration membrane fouling , 2008 .

[13]  J. Qu,et al.  Mechanism of natural organic matter removal by polyaluminum chloride: effect of coagulant particle size and hydrolysis kinetics. , 2008, Water research.

[14]  Dongsheng Wang,et al.  Characterization of floc size, strength and structure under various coagulation mechanisms , 2006 .

[15]  A. W. Zularisam,et al.  Behaviours of natural organic matter in membrane filtration for surface water treatment — a review , 2006 .

[16]  Huijuan Liu,et al.  Coagulation behavior of aluminum salts in eutrophic water: significance of Al13 species and pH control. , 2006, Environmental science & technology.

[17]  B Jefferson,et al.  A review of floc strength and breakage. , 2005, Water research.

[18]  Seockheon Lee,et al.  Influence of streaming potential on flux decline of microfiltration with in-line rapid pre-coagulation process for drinking water production , 2005 .

[19]  A. Fane,et al.  Impact of natural organic matter on floc size and structure effects in membrane filtration. , 2005, Environmental science & technology.

[20]  W. Dubbin,et al.  Copper-glyphosate sorption to microcrystalline gibbsite in the presence of soluble Keggin Al13 polymers. , 2005, Environmental science & technology.

[21]  Bruce Jefferson,et al.  Breakage, regrowth, and fractal nature of natural organic matter flocs. , 2005, Environmental science & technology.

[22]  K. Choi,et al.  In-line coagulation with low-pressure membrane filtration. , 2004, Water research.

[23]  Andrea I. Schäfer,et al.  Nanofiltration: Principles and Applications , 2004 .

[24]  M. A. Yukselen,et al.  The reversibility of floc breakage , 2004 .

[25]  Z. Jia,et al.  Synthesis of Polyaluminum Chloride with a Membrane Reactor: Operating Parameter Effects and Reaction Pathways , 2004 .

[26]  B. Gao,et al.  Poly-aluminum-silicate-chloride (PASiC)—a new type of composite inorganic polymer coagulant , 2003 .

[27]  Seunghyun Kim,et al.  Effect of the removal of DOMs on the performance of a coagulation-UF membrane system for drinking water production , 2002 .

[28]  J. Rouch,et al.  Impact of coagulation conditions on the in-line coagulation/UF process for drinking water production☆ , 2002 .

[29]  R. Wu,et al.  Multilevel structure of sludge flocs. , 2002, Journal of colloid and interface science.

[30]  B. Gao,et al.  Evaluation of aluminum-silicate polymer composite as a coagulant for water treatment. , 2002, Water research.

[31]  B. Gao,et al.  The chemical species distribution and transformation of polyaluminum silicate chloride coagulant. , 2002, Chemosphere.

[32]  J. Raper,et al.  On techniques for the measurement of the mass fractal dimension of aggregates. , 2002, Advances in colloid and interface science.

[33]  T. Waite,et al.  Aggregation Kinetics and Fractal Structure of γ-Alumina Assemblages , 2001 .

[34]  Byung-Hyun Moon,et al.  Effects of pH and dosage on pollutant removal and floc structure during coagulation , 2001 .

[35]  A. Zydney,et al.  Humic acid fouling during ultrafiltration , 2000 .

[36]  Waite,et al.  Colloidal Fouling of Ultrafiltration Membranes: Impact of Aggregate Structure and Size. , 1999, Journal of colloid and interface science.

[37]  Stefan Blaser,et al.  Particles under stress , 1998 .

[38]  M. Clark,et al.  Adsorption of aquatic humic substances on hydrophobic ultrafiltration membranes , 1994 .

[39]  C. Ludwig,et al.  On the chemistry of the Keggin Al13 polymer , 1992 .

[40]  Mark R. Wiesner,et al.  Fouling in tangential-flow ultrafiltration : the effect of colloid size and coagulation pretreatment , 1990 .

[41]  R. J. François.  Strength of aluminium hydroxide flocs , 1987 .

[42]  A. Kjekshus,et al.  On the Crystal Structure of Some Basic Aluminium Salts. , 1960 .