Analysis of the Loss and Heat on Damper Bars in Large Tubular Hydro-Generator base on the 3D Electromagnetic-Temperature field Calculation

In order to research the losses and heat of damper bars thoroughly, a 3D moving electromagnetic field FE model of tubular hydro- generator and a 3D temperature field FE model of the rotor are built respectively. Furthermore, according to the different operating conditions, the compositive calculations about the losses and temperatures of the damper bars of a 36MW tubular hydro-generator are carried out, and the data are compared with the test. The results show that the computation precision is satisfied. Streszczenie. Badano straty i nagrzewanie w pretach tlumika hydrogeneratora wykorzystując 3D model elektromagnetyczny. Badano rozklad temperatury oraz pola elektromagnetycznego. (Analiza strat i nagrzewania w pretach tlumika turbogeneratora bazujące na obliczeniach 3D temperatury I pola elektromagnetycznego)

[1]  Alexander Schwery,et al.  Large low-speed hydro-generators - unbalanced magnetic pulls and additional damper losses in eccentricity conditions , 2007 .

[2]  Ni Guang-zheng.  Analysis of ventilation fluid field and rotor temperature field of a generator , 2007 .

[3]  F. Piriou,et al.  Finite Element Analysis in Electromagnetic Systems Accounting for Electric Circuits , 1992, Digest of the Fifth Biennial IEEE Conference on Electromagnetic Field Computation.

[4]  M. Chari,et al.  Heat flow in the stator core of large turbine-generators, by the method of three-dimensional finite elements part II: Temperature distribution in the stator iron , 1976, IEEE Transactions on Power Apparatus and Systems.

[5]  Alexander Schwery,et al.  Additional Losses in the Damper Winding of Large Hydrogenerators at Open-Circuit and Load Conditions , 2010, IEEE Transactions on Industrial Electronics.

[6]  A. Armor.  Transient, Three-Dimensional, Finite-Element Analysis of Heat Flow in Turbine-Generator Rotors , 1980, IEEE Transactions on Power Apparatus and Systems.

[7]  Andrew M. Knight,et al.  Use of a Permeance Model to Predict Force Harmonic Components and Damper Winding Effects in Salient Pole Synchronous Machines , 2002, IEEE Power Engineering Review.

[8]  H. C. Karmaker,et al.  Broken damper bar detection studies using flux probe measurements and time-stepping finite element analysis for salient-pole synchronous machines , 2003, 4th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, 2003. SDEMPED 2003..

[9]  G. W. Buckley,et al.  An integrated approach for the calculation of losses and temperatures in the end-region of large turbine generators , 1990 .