Additive manufacturing technologies enabling rapid and interventional production of protective face shields and masks during the COVID-19 pandemic.

BACKGROUND Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is transmitted through respiratory droplets and contact routes, hence the demand for personal protective equipment (PPE) has increased during the outbreak of coronavirus disease 2019 (COVID-19). Among the most noticeable shortages was the lack of face shields. The urgent demand for PPE induced interdisciplinary cooperation to overcome the shortages, and additive manufacturing proved to be ideal for the crisis situation. OBJECTIVES To investigate the possibilities of implementing additive manufacturing technologies in the interventional fabrication of protective face shields for medical staff. MATERIAL AND METHODS An Ender 3 Pro 3D printer was used to print headbands and Cura 4.4 was chosen as the slicing software. Open source face shield designs were downloaded as standard tessellation language (STL) files and compared. Only models with scientific support were taken under consideration. RESULTS The mean time for producing the headbands tested ranged from 59 min to almost 3 h, depending on the design. After setting up our low budget printer and choosing the Prusa RC 3 protective face shield as the main product, we were able to fabricate about 30 face shields per week at a cost of about €1 each. During 4 weeks, 126 face shields were produced and delivered to various hospital wards, which substantially eased the shortages. CONCLUSIONS Additive manufacturing enables immediate responses to needs in emergency situations, and allows for mass production of personal protective equipment in a short time due the rapid exchange of data among printer users. Despite the unregulated legal situation and insufficient scientific evidence, such protective equipment has been approved by clinicians and is currently used by medical personnel around the world.

[1]  Sung-hoon Ahn,et al.  The effects of moisture and temperature on the mechanical properties of additive manufacturing components: fused deposition modeling , 2016 .

[2]  J. Kindrachuk,et al.  A year of terror and a century of reflection: perspectives on the great influenza pandemic of 1918–1919 , 2019, BMC Infectious Diseases.

[3]  C. Akdis,et al.  Clinical characteristics of 140 patients infected with SARS‐CoV‐2 in Wuhan, China , 2020, Allergy.

[4]  A. M. Leontovich,et al.  The species Severe acute respiratory syndrome-related coronavirus: classifying 2019-nCoV and naming it SARS-CoV-2 , 2020, Nature Microbiology.

[5]  Daniel Güllmar,et al.  3D printing of MRI compatible components: why every MRI research group should have a low-budget 3D printer. , 2014, Medical engineering & physics.

[6]  N. Sullivan,et al.  Emerging viral diseases from a vaccinology perspective: preparing for the next pandemic , 2017, Nature Immunology.

[7]  P. Daszak,et al.  Prediction and prevention of the next pandemic zoonosis , 2012, The Lancet.

[8]  J. Zuniga,et al.  The role of additive manufacturing and antimicrobial polymers in the COVID-19 pandemic , 2020, Expert review of medical devices.

[9]  Ventola Cl.  Medical Applications for 3D Printing: Current and Projected Uses. , 2014 .

[10]  Jian-ming Wang,et al.  Clinical characteristics of 24 asymptomatic infections with COVID-19 screened among close contacts in Nanjing, China , 2020, Science China Life Sciences.

[11]  Rainer Schmelzeisen,et al.  3-D Printed Protective Equipment during COVID-19 Pandemic , 2020, Materials.

[12]  Min Chen,et al.  The mental health of medical workers in Wuhan, China dealing with the 2019 novel coronavirus , 2020, The Lancet Psychiatry.

[13]  L. Tapie,et al.  3D-printed face protective shield in interventional radiology: Evaluation of an immediate solution in the era of COVID-19 pandemic , 2020, Diagnostic and Interventional Imaging.

[14]  D. Wang,et al.  The origin, transmission and clinical therapies on coronavirus disease 2019 (COVID-19) outbreak – an update on the status , 2020, Military Medical Research.

[15]  O. Oth,et al.  How to Sterilize 3D Printed Objects for Surgical Use? An Evaluation of the Volumetric Deformation of 3D-Printed Genioplasty Guide in PLA and PETG after Sterilization by Low-Temperature Hydrogen Peroxide Gas Plasma , 2019, The Open Dentistry Journal.

[16]  C. L. Ventola.  Medical Applications for 3D Printing: Current and Projected Uses. , 2014, P & T : a peer-reviewed journal for formulary management.

[17]  Udayabhanu M. Jammalamadaka,et al.  Novel Biomaterials Used in Medical 3D Printing Techniques , 2018, Journal of functional biomaterials.

[18]  Jan Hošek,et al.  Designing of PLA scaffolds for bone tissue replacement fabricated by ordinary commercial 3D printer , 2017, Journal of Biological Engineering.

[19]  Yan Bai,et al.  Presumed Asymptomatic Carrier Transmission of COVID-19. , 2020, JAMA.

[20]  Oon Tek Ng,et al.  Air, Surface Environmental, and Personal Protective Equipment Contamination by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) From a Symptomatic Patient. , 2020, JAMA.

[21]  M. Newman.  Covid-19: doctors’ leaders warn that staff could quit and may die over lack of protective equipment , 2020, BMJ.

[22]  Marek Macko,et al.  Medical and military applications of 3D printing , 2016 .

[23]  Ningxi Yang,et al.  The Effects of Social Support on Sleep Quality of Medical Staff Treating Patients with Coronavirus Disease 2019 (COVID-19) in January and February 2020 in China , 2020, Medical science monitor : international medical journal of experimental and clinical research.

[24]  L. Stabile,et al.  Airborne particle emission of a commercial 3D printer: the effect of filament material and printing temperature , 2017, Indoor air.

[25]  Jian-ming Wang,et al.  Clinical characteristics of 24 asymptomatic infections with COVID-19 screened among close contacts in Nanjing, China , 2020, Science China Life Sciences.

[26]  L. Cavanna,et al.  Reorganisation of medical oncology departments during the novel coronavirus disease-19 pandemic: a nationwide Italian survey , 2020, European Journal of Cancer.

[27]  Jonathan M. Morris,et al.  COVID-19 and the role of 3D printing in medicine , 2020, 3D Printing in Medicine.

[28]  Andrea Alice Konta,et al.  Personalised 3D Printed Medicines: Which Techniques and Polymers Are More Successful? , 2017, Bioengineering.

[29]  Elisabeth Mahase.  Novel coronavirus: Australian GPs raise concerns about shortage of face masks , 2020, BMJ.

[30]  L. Walløe,et al.  The Third Plague Pandemic in Europe , 2019, Proceedings of the Royal Society B.

[31]  Megan L Ranney,et al.  Critical Supply Shortages - The Need for Ventilators and Personal Protective Equipment during the Covid-19 Pandemic. , 2020, The New England journal of medicine.

[32]  Diane J Burgess,et al.  Sterilization of implantable polymer‐based medical devices: A review , 2017, International journal of pharmaceutics.

[33]  M. Koopmans,et al.  Rapid assessment of regional SARS-CoV-2 community transmission through a convenience sample of healthcare workers, the Netherlands, March 2020 , 2020, Euro surveillance : bulletin Europeen sur les maladies transmissibles = European communicable disease bulletin.

[34]  Kai Zhao,et al.  A pneumonia outbreak associated with a new coronavirus of probable bat origin , 2020, Nature.

[35]  W. Ko,et al.  Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and coronavirus disease-2019 (COVID-19): The epidemic and the challenges , 2020, International Journal of Antimicrobial Agents.

[36]  S. Ishack,et al.  Applications of 3D Printing Technology to Address COVID-19–Related Supply Shortages , 2020, The American Journal of Medicine.

[37]  D. Amin,et al.  3D Printing of Face Shields During COVID-19 Pandemic: A Technical Note , 2020, Journal of Oral and Maxillofacial Surgery.

[38]  A. Raja,et al.  Personal protective equipment needs in the USA during the COVID-19 pandemic , 2020, The Lancet.

[39]  P. Gully.  Pandemics, regional outbreaks, and sudden-onset disasters , 2020, Healthcare management forum.

[40]  S. Meo,et al.  Middle East Respiratory Syndrome Coronavirus (MERS-CoV) infection: epidemiology, pathogenesis and clinical characteristics. , 2018, European review for medical and pharmacological sciences.

[41]  Yongfang Jiang,et al.  Psychological Impact and Coping Strategies of Frontline Medical Staff in Hunan Between January and March 2020 During the Outbreak of Coronavirus Disease 2019 (COVID-19) in Hubei, China , 2020, Medical science monitor : international medical journal of experimental and clinical research.

[42]  Mark Zastrow,et al.  Open science takes on the coronavirus pandemic , 2020, Nature.

[43]  Shiou-Hwei Yeh,et al.  Microbiologic Characteristics, Serologic Responses, and Clinical Manifestations in Severe Acute Respiratory Syndrome, Taiwan , 2003, Emerging infectious diseases.

[44]  Dylan H. Morris,et al.  Aerosol and Surface Stability of SARS-CoV-2 as Compared with SARS-CoV-1 , 2020, The New England journal of medicine.

[45]  M. Jakovljevič,et al.  COVID-19 Pandemia and Public and Global Mental Health from the Perspective of Global Health Securit. , 2020, Psychiatria Danubina.

[46]  S. Mossad.  Influenza update 2018–2019: 100 years after the great pandemic , 2018, Cleveland Clinic Journal of Medicine.

[47]  Y. Hu,et al.  Clinical features of patients infected with 2019 novel coronavirus in Wuhan, China , 2020, The Lancet.

[48]  J. Wang,et al.  Reasons for healthcare workers becoming infected with novel coronavirus disease 2019 (COVID-19) in China , 2020, Journal of Hospital Infection.