Study of hybrid nanofluids of TiO2 and montmorillonite clay nanoparticles for milling of AISI 4340 steel

[1]  Ruslan M. Karimbaev,et al.  An improvement in fatigue behavior of AISI 4340 steel by shot peening and ultrasonic nanocrystal surface modification , 2020 .

[2]  D. Toghraie,et al.  Experimental measurements of thermal conductivity of engine oil-based hybrid and mono nanofluids with tungsten oxide (WO3) and MWCNTs inclusions , 2020 .

[3]  L. Peña-Parás,et al.  Enhancing tool life, and reducing power consumption and surface roughness in milling processes by nanolubricants and laser surface texturing , 2020 .

[4]  Sudarsan Ghosh,et al.  Experimental investigations on surface grinding of silicon nitride subjected to mono and hybrid nanofluids , 2019, Ceramics International.

[5]  Li Li,et al.  Integrated optimization of cutting tool and cutting parameters in face milling for minimizing energy footprint and production time , 2019, Energy.

[6]  L. Peña-Parás,et al.  Optimization of milling parameters of 1018 steel and nanoparticle additive concentration in cutting fluids for enhancing multi-response characteristics , 2019, Wear.

[7]  Jitendra Kumar Katiyar,et al.  Influence of alumina/MWCNT hybrid nanoparticle additives on tribological properties of lubricants in turning operations , 2019 .

[8]  L. Peña-Parás,et al.  Application of nanoclay lubricants for lowering wear of tools for steel meshing - A case study , 2018, IOP Conference Series: Materials Science and Engineering.

[9]  M. Velarde,et al.  Study on the anti-wear properties of metal-forming lubricants with TiO2 and CuO nanoparticle additives , 2018, IOP Conference Series: Materials Science and Engineering.

[10]  Prithbey Raj Dey,et al.  Taguchi S/N based optimization of machining parameters for surface roughness, tool wear and material removal rate in hard turning under MQL cutting condition , 2018, Measurement.

[11]  L. Peña-Parás,et al.  Optimization of surface roughness on slitting knives by titanium dioxide nano particles as an additive in grinding lubricant , 2018 .

[12]  Azhar Vellore,et al.  Effects of substrate surface roughness and nano/micro particle additive size on friction and wear in lubricated sliding , 2018 .

[13]  A. Sharma,et al.  Novel uses of alumina/graphene hybrid nanoparticle additives for improved tribological properties of lubricant in turning operation , 2018 .

[14]  A. Sharma,et al.  Novel uses of alumina-MoS2 hybrid nanoparticle enriched cutting fluid in hard turning of AISI 304 steel , 2017 .

[15]  Amit Rai Dixit,et al.  Performance Evaluation of Alumina-graphene Hybrid Nano-cutting Fluid in Hard Turning , 2017 .

[16]  K. Holmberg,et al.  Influence of tribology on global energy consumption, costs and emissions , 2017 .

[17]  R. Venkata Rao,et al.  A multi-objective algorithm for optimization of modern machining processes , 2017, Eng. Appl. Artif. Intell..

[18]  T. Zhao,et al.  Effect of cutting edge radius on surface roughness and tool wear in hard turning of AISI 52100 steel , 2017 .

[19]  Dongzhou Jia,et al.  Experimental Evaluation of the Lubrication Performance of MoS2/CNT Nanofluid for Minimal Quantity Lubrication in Ni-based Alloy Grinding , 2015 .

[20]  Gianni Campatelli,et al.  Optimization of process parameters using a Response Surface Method for minimizing power consumption in the milling of carbon steel , 2014 .

[21]  A. Sarhan,et al.  An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy , 2013 .

[22]  B. Bhushan,et al.  Effect of MoS2 and WS2 Nanotubes on Nanofriction and Wear Reduction in Dry and Liquid Environments , 2013, Tribology Letters.

[23]  Mitjan Kalin,et al.  Mechanisms and improvements in the friction and wear behavior using MoS2 nanotubes as potential oil additives , 2012 .

[24]  R. Chou,et al.  Antiwear properties of carbon-coated copper nanoparticles used as an additive to a polyalphaolefin , 2011 .

[25]  M. L. Mora,et al.  Natural nanoclays: applications and future trends – a chilean perspective , 2009, Clay Minerals.

[26]  A. Tiwari,et al.  Measurement of machining forces and surface roughness in turning of AISI 304 steel using alumina-MWCNT hybrid nanoparticles enriched cutting fluid , 2020 .

[27]  V. Murali Krishna,et al.  An Investigation on Turning AISI 1018 Steel with Hybrid Biodegradeable Nanofluid/MQL Incorporated with Combinations of CuO-Al2O3 Nanoparticles , 2020 .

[28]  Amit Rai Dixit,et al.  Investigation into Performance of SiO 2 Nanoparticle Based Cutting Fluid in Machining Process , 2017 .

[29]  M. A. Gilani,et al.  Characteristic Properties of Nanoclays and Characterization of Nanoparticulates and Nanocomposites , 2016 .

[30]  Stephen U. S. Choi.  Enhancing thermal conductivity of fluids with nano-particles , 1995 .