Experimental and computational study on mechanical behaviour of carpentry corner log joints

Abstract This work concerns experimental and numerical research on carpentry joints used in historic wooden buildings in southeastern Poland and western Ukraine. These structures are mainly sacred buildings, and the types of corner log joints characteristic of this region are primarily saddle-notch and dovetail joints; thus, these two types of joints were analysed in this study. The modelling of historic timber structures is a complex issue, so the following steps are necessary to obtain accurate solutions: verification, validation and uncertainty quantification. The first and third steps were performed in a previous study, so the current research aimed to validate the numerical models and perform simulations of carpentry joints. Herein, the authors created finite element models of two types of joints and subsequently analysed the mechanical behaviour of these joints. Due to issues concerning model validation, the authors designed a testing stand for corner joints, which formed a part of a biaxial testing machine. The joints were subjected to horizontal loads (deformations), which may cause damage to the connection. Thus, special parts were designed for the stand, which made it possible to fix the joint and prevented eccentric forces that could possibly damage the machine during testing. The authors presented the differences and similarities in the behaviour of both types of joints, emphasizing the corresponding advantages and disadvantages. In addition, the authors determined which type of joint was the most susceptible to damage and what elements failed first. This paper also showed the complexity of modelling timber structures and the accuracy of the proposed numerical models for both types of joints through comparisons of the numerical and experimental results. This work primary addressed the problems in accurately reflecting material, load and boundary conditions in numerical modelling of tested carpentry corner log joints.

[1]  Jerzy Jasieńko,et al.  In situ assessment of structural timber using the resistance drilling method – Evaluation of usefulness , 2016 .

[2]  Benjamin W. Schafer,et al.  Experimental and numerical analysis of a halved and tabled traditional timber scarf joint , 2009 .

[3]  Francisco J. Rescalvo,et al.  Experimental and analytical analysis for bending load capacity of old timber beams with defects when reinforced with carbon fiber strips , 2018 .

[4]  Jerzy Jasieńko,et al.  Experimental tests and numerical analysis of historic bent timber elements reinforced with CFRP strips , 2013 .

[5]  P. Arias,et al.  Historic bridge modelling using laser scanning, ground penetrating radar and finite element methods in the context of structural dynamics , 2009 .

[6]  Chiara Bedon,et al.  Derivation of buckling design curves via FE modelling for in-plane compressed timber log-walls in accordance with the Eurocode 5 , 2017, European Journal of Wood and Wood Products.

[7]  Peter Niemz,et al.  Aging effects on physical and mechanical properties of spruce, fir and oak wood , 2015 .

[8]  Claudio Amadio,et al.  Experimental Study and Numerical Investigation of Blockhaus Shear Walls Subjected to In-Plane Seismic Loads , 2015 .

[9]  Frank Lam,et al.  Structural performance of rounded dovetail connections: experimental and numerical investigations , 2011, European Journal of Wood and Wood Products.

[10]  Antonio Borri,et al.  Uncertainty analysis of FRP reinforced timber beams , 2017 .

[11]  Helena Cruz,et al.  Behaviour and repair of carpentry connections – Rotational behaviour of the rafter and tie beam connection in timber roof structures , 2012 .

[12]  Fernando I. Rial,et al.  FEM modeling of structures based on close range digital photogrammetry , 2009 .

[13]  Laurent Daudeville,et al.  Joints and wood shear walls modelling II: Experimental tests and FE models under seismic loading , 2015 .

[14]  Antonio Gesualdo,et al.  An integrated approach to the conservation of the roofing structures in the Pompeian Domus , 2018 .

[15]  Pedro Arias,et al.  Algorithm for automatic detection and analysis of cracks in timber beams from LiDAR data , 2017 .

[16]  Paulo B. Lourenço,et al.  Guidelines for On-Site Assessment of Historic Timber Structures , 2015 .

[17]  Federico M. Mazzolani,et al.  Flexural and shear behaviour of ancient wooden beams: Experimental and theoretical evaluation , 2006 .

[18]  Keith Crews,et al.  Application of Quasi-Brittle Material Model for Analysis of Timber Members , 2015 .

[19]  Michael Kaliske,et al.  Three-Dimensional Numerical Analysis of Dowel-Type Connections in Timber Engineering , 2009 .

[20]  Claudio Amadio,et al.  Assessment of the structural stability of Blockhaus timber log-walls under in-plane compression via full-scale buckling experiments , 2015 .

[21]  Wen-Shao Chang,et al.  Repair and reinforcement of timber columns and shear walls – A review , 2015 .

[22]  Izabela Lubowiecka,et al.  Historical carpentry corner log joints—Numerical analysis within stochastic framework , 2018, Engineering Structures.

[23]  Michael Kaliske,et al.  Models for numerical failure analysis of wooden structures , 2009 .

[24]  Chiara Bedon,et al.  Non-linear modelling of the in-plane seismic behaviour of timber Blockhaus log-walls , 2015 .

[25]  Chiara Bedon,et al.  Shear Performance Assessment of Timber Log-House Walls under In-Plane Lateral Loads via Numerical and Analytical Modelling , 2018, Buildings.

[26]  Laurent Daudeville,et al.  Joints and wood shear walls modelling I: Constitutive law, experimental tests and FE model under quasi-static loading , 2014 .

[27]  Jerzy Jasieńko,et al.  Solid timber beams strengthened with steel plates – Experimental studies , 2014 .

[28]  I. Lubowiecka,et al.  Influence of Wood Moisture on Strength and Elastic Modulus for Pine and Fir Wood Subjected to 4-point Bending Tests , 2019, IOP Conference Series: Materials Science and Engineering.

[29]  Frank Lam,et al.  Strength Prediction for Rounded Dovetail Connections Considering Size Effects , 2010 .

[30]  Federico M. Mazzolani,et al.  Experimental correlations between destructive and non-destructive tests on ancient timber elements , 2010 .

[31]  Roberto Tomasi,et al.  Analysis of timber log-house construction system via experimental testing and analytical modelling , 2016 .

[32]  Jorge M. Branco,et al.  Structural behaviour of log timber walls under lateral in-plane loads , 2012 .