Element-by-element model updating of large-scale structures based on component mode synthesis method

Abstract Component mode synthesis (CMS) method is developed and applied to the element-by-element model updating of large-scale structures in this study. Several lowest frequencies and mode shapes of the global structure are obtained with the free interface CMS method by employing the several lowest frequencies and mode shapes of each substructure individually. In this process, the removal of higher modes is compensated by the residual modes. The eigensensitivity of the global structure is then assembled from the eigensensitivities of each substructure to the updating element parameters. Subsequently, the global model is updated using the sensitivity-based optimization technique. The application of the present method to an 11-floor frame structure and to a large-scale structure demonstrates its accuracy and efficiency. The computational time required by the substructuring method to calculate the eigensensitivity matrices is significantly reduced, as compared with that consumed by the conventional global-based approach. Selection of the number of master modes is also proposed.

[1]  D. Rixen.  A dual Craig-Bampton method for dynamic substructuring , 2004 .

[2]  Richard B. Nelson,et al.  Simplified calculation of eigenvector derivatives , 1976 .

[3]  Hongping Zhu,et al.  IMPROVED SUBSTRUCTURING METHOD FOR EIGENSOLUTIONS OF LARGE-SCALE STRUCTURES , 2009 .

[4]  S. Rubin.  Improved Component-Mode Representation for Structural Dynamic Analysis , 1975 .

[5]  Hong Hao,et al.  Dynamic assessment of shear connectors in slab-girder bridges , 2007 .

[6]  Maenghyo Cho,et al.  Iterative method for dynamic condensation combined with substructuring scheme , 2008 .

[7]  Chan Ghee Koh,et al.  Substructural and progressive structural identification methods , 2003 .

[8]  Nuno M. M. Maia,et al.  Theoretical and Experimental Modal Analysis , 1997 .

[9]  T. S. Aziz,et al.  Application of Wilson-Ritz vectors in dynamic substructuring , 1993 .

[10]  C. Fritzen,et al.  DAMAGE DETECTION BASED ON MODEL UPDATING METHODS , 1998 .

[11]  Hong Hao,et al.  Damage identification of shear connectors with wavelet packet energy: Laboratory test study , 2008 .

[12]  Costas Papadimitriou,et al.  Component mode synthesis techniques for finite element model updating , 2013 .

[13]  W. Hurty.  Dynamic Analysis of Structural Systems Using Component Modes , 1965 .

[14]  M. Bampton,et al.  Coupling of substructures for dynamic analyses. , 1968 .

[15]  R. Craig,et al.  Free-interface methods of substructure coupling for dynamic analysis , 1976 .

[16]  G. Roeck,et al.  Structural damage identification of the highway bridge Z24 by FE model updating , 2004 .

[17]  O. S. Salawu.  Detection of structural damage through changes in frequency: a review , 1997 .

[18]  P. G. Bakir,et al.  Sensitivity-based finite element model updating using constrained optimization with a trust region algorithm , 2007 .

[19]  Jun Li,et al.  Substructure damage identification based on response reconstruction in frequency domain and model updating , 2012 .

[20]  R. Macneal.  A hybrid method of component mode synthesis , 1971 .

[21]  J. Qiu,et al.  A new exact substructure method using mixed modes , 2003 .

[22]  D. Rixen,et al.  General Framework for Dynamic Substructuring: History, Review and Classification of Techniques , 2008 .

[23]  D. Sarsri,et al.  Dynamic analysis of large structures with uncertain parameters based on coupling component mode synthesis and perturbation method , 2016 .

[24]  R. R. Craig.  A brief tutorial on substructure analysis and testing , 2000 .

[25]  Dejun Wang,et al.  Updating the Finite Element Model of Large-Scaled Structures using Component mode Synthesis Technique , 2013, Intell. Autom. Soft Comput..

[26]  Yong Xia,et al.  An iterative substructuring approach to the calculation of eigensolution and eigensensitivity , 2011 .