Plasma sprayed hydroxyapatite coatings on titanium substrates. Part 1: Mechanical properties and residual stress levels.

[1]  H. Aoki,et al.  Hydroxyapatite coating by dipping method, and bone bonding strength , 1996 .

[2]  S D Cook,et al.  In vivo mechanical and histological characteristics of HA-coated implants vary with coating vendor. , 1995, Journal of biomedical materials research.

[3]  K. Hayashi,et al.  Effect of surface roughness of hydroxyapatite-coated titanium on the bone-implant interface shear strength. , 1994, Biomaterials.

[4]  T. W. Clyne,et al.  Investigation of residual stress generation during thermal spraying by continuous curvature measurement , 1994 .

[5]  I. Turner,et al.  Residual stress measurement in thermal sprayed hydroxyapatite coatings , 1994 .

[6]  T. Chaki,et al.  Densification and strengthening of silver-reinforced hydroxyapatite-matrix composite prepared by sintering , 1994 .

[7]  T. Clyne,et al.  The effect of residual stresses on the debonding of coatings—I. A model for delamination at a bimaterial interface , 1994 .

[8]  A. Ababou,et al.  Microstructure and related mechanical properties of hot pressed hydroxyapatite ceramics , 1994 .

[9]  W. Bonfield,et al.  Processing behaviour of hydroxyapatite powders with contrasting morphology , 1994 .

[10]  M. Yoshinari,et al.  Thin hydroxyapatite coating produced by the ion beam dynamic mixing method. , 1994, Biomaterials.

[11]  Samuel Lewin Evans,et al.  Layered, adhesively bonded hydroxyapatite coatings for orthopaedic implants , 1994 .

[12]  J. Ong,et al.  Post-deposition heat treatments for ion beam sputter deposited calcium phosphate coatings. , 1994, Biomaterials.

[13]  Christopher C. Berndt,et al.  In vitro testing of plasma-sprayed hydroxyapatite coatings , 1994 .

[14]  C. Tsai,et al.  Characteristics and osteoconductivity of three different plasma-sprayed hydroxyapatite coatings , 1993 .

[15]  M. P. Srivastava,et al.  Plasma spraying of biologically derived hydroxyapatite on implantable materials , 1993 .

[16]  C. Rüssel,et al.  Hydroxyapatite coatings by a polymeric route , 1992 .

[17]  R. Pilliar,et al.  Characterization of the interface in the plasma-sprayed HA coating/Ti-6Al-4V implant system. , 1991, Journal of biomedical materials research.

[18]  J. R. Brandon,et al.  Phase stability of zirconia-based thermal barrier coatings part II. Zirconia-ceria alloys , 1991 .

[19]  T. Clyne,et al.  The quenching stress in thermally sprayed coatings , 1991 .

[20]  W. Brantley,et al.  Determination of the ratio of HA/TCP mixtures by x-ray diffraction , 1991 .

[21]  A. Evans,et al.  Development of a test method for measuring the mixed mode fracture resistance of bimaterial interfaces , 1990 .

[22]  H. Oonishi,et al.  The effect of hydroxyapatite coating on bone growth into porous titanium alloy implants. , 1989, The Journal of bone and joint surgery. British volume.

[23]  H. Aoki,et al.  Mechanical properties of sintered hydroxyapatite for prosthetic applications , 1981 .

[24]  T. Kijima,et al.  Preparation and Thermal Properties of Dense Polycrystalline Oxyhydroxyapatite , 1979 .

[25]  J. Bobick,et al.  Hydroxylapatite synthesis and characterization in dense polycrystalline form , 1976 .

[26]  J. Weng,et al.  Intrinsic factors of apatite influencing its amorphization during plasma-spray coating. , 1995, Biomaterials.

[27]  K. Hayashi,et al.  Comparison of bone-implant interface shear strength of hydroxyapatite-coated and alumina-coated metal implants. , 1995, Journal of biomedical materials research.

[28]  J D Haman,et al.  Characterization of high velocity oxy-fuel combustion sprayed hydroxyapatite. , 1995, Biomaterials.

[29]  W. Lacefield,et al.  The effect of dissolution on plasma sprayed hydroxylapatite coatings on titanium. , 1993, Clinical materials.

[30]  A. Cigada,et al.  Adhesion properties of plasma sprayed hydroxylapatite coatings for orthopaedic prostheses. , 1993, Bio-medical materials and engineering.

[31]  P. Ducheyne,et al.  Plasma spraying induced changes of calcium phosphate ceramic characteristics and the effect onin vitro stability , 1992 .

[32]  A. Osaka,et al.  Calcium apatite prepared from calcium hydroxide and orthophosphoric acid , 1991 .

[33]  C. Berndt,et al.  Optimization of spraying parameters for hydroxyapatite , 1991 .

[34]  L. Hench,et al.  CRC handbook of bioactive ceramics , 1990 .

[35]  Seiji Kuroda,et al.  Generation mechanisms of residual stresses in plasma-sprayed coatings , 1990 .

[36]  Christopher C. Berndt,et al.  Thermal spraying for bioceramic applications , 1990 .

[37]  C. Klein,et al.  Bonding of bone to apatite-coated implants. , 1988, The Journal of bone and joint surgery. British volume.