The characteristics of flow patterns in the shell-and-plate heat exchanger

[1]  Boqiang Lin,et al.  How to achieve the first step of the carbon-neutrality 2060 target in China: The coal substitution perspective , 2021 .

[2]  A. S. Raghubanshi,et al.  Energy emissions, consumption and impact of urban households: A review , 2021 .

[3]  F. Haglind,et al.  Experimental analysis of high temperature flow boiling heat transfer and pressure drop in a plate heat exchanger , 2021 .

[4]  Byeongsu Kim,et al.  Boiling flow patterns and dry-out characteristics of R-1234ze(E) in a plate heat exchanger , 2020 .

[5]  Chi-Chuan Wang,et al.  Experimental Investigation of the Thermofluid Characteristics of Shell-and-Plate Heat Exchangers , 2020, Energies.

[6]  Ke Wang,et al.  Flow patterns and pressure drop in the shell-and-plate heat exchangers , 2020 .

[7]  Wei Li,et al.  A General Correlation for Frictional Pressure Drop of Flow Boiling in Plate Heat Exchangers , 2020, ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels.

[8]  Yongchan Kim,et al.  Comparative evaluation of the evaporation heat transfer characteristics of a low-GWP refrigerant R-1234ze(E) between shell-and-plate and plate heat exchangers , 2020 .

[9]  S. Yun,et al.  Evaporation heat transfer characteristics of R-245fa in a shell and plate heat exchanger for very-high-temperature heat pumps , 2020 .

[10]  Chi-Chuan Wang,et al.  Numerical investigation of thermal and hydraulic performance of shell and plate heat exchanger , 2020 .

[11]  Susanne Buscher.  Visualization and modelling of flow pattern transitions in a cross-corrugated plate heat exchanger channel with uniform two-phase distribution , 2019, International Journal of Heat and Mass Transfer.

[12]  G. Longo,et al.  Boiling of the new low-GWP refrigerants R1234ze(Z) and R1233zd(E) inside a small commercial brazed plate heat exchanger , 2019, International Journal of Refrigeration.

[13]  Wei Li,et al.  A Modified Correlation for Flow Boiling Heat Transfer in Plate Heat Exchangers , 2019, Journal of Thermal Science and Engineering Applications.

[14]  B. Bai,et al.  Flow patterns and pressure drop of downward two-phase flow in a capsule-type plate heat exchanger , 2019, Experimental Thermal and Fluid Science.

[15]  Bo Wang,et al.  Design and Fatigue Analysis of High Pressure Shell and Plate Heat Exchanger , 2019, IOP Conference Series: Earth and Environmental Science.

[16]  Yong Chan Kim,et al.  Condensation heat transfer characteristics of R245fa in a shell and plate heat exchanger for high-temperature heat pumps , 2018, International Journal of Heat and Mass Transfer.

[17]  Yong Chan Kim,et al.  Comparative evaluation of flow boiling heat transfer characteristics of R-1234ze(E) and R-134a in plate heat exchangers with different Chevron angles , 2018 .

[18]  P. Hrnjak,et al.  A new method to simultaneously measure local heat transfer and visualize flow boiling in plate heat exchanger , 2017 .

[19]  Byung Sik Park,et al.  Flow boiling of R245fa in the brazed plate heat exchanger: Thermal and hydraulic performance assessment , 2017 .

[20]  Fredrik Haglind,et al.  Flow boiling heat transfer and pressure drop characteristics of R134a, R1234yf and R1234ze in a plate heat exchanger for organic Rankine cycle units , 2017 .

[21]  S. Kabelac,et al.  Experimental investigation of the flow pattern, pressure drop and void fraction of two-phase flow in the corrugated gap of a plate heat exchanger , 2017 .

[22]  Bengt Sundén,et al.  CFD analysis of two types of welded plate heat exchangers , 2017 .

[23]  S. Kabelac,et al.  Two-phase flow patterns in adiabatic and diabatic corrugated plate gaps , 2016 .

[24]  L. Rossetto,et al.  Flow boiling of R32 inside a brazed plate heat exchanger , 2016 .

[25]  J. Thome,et al.  High resolution infrared measurements of single-phase flow of R245fa and R236fa within a compact plate heat exchanger, Part 1: Experimental setup and pressure drop results , 2016 .

[26]  John R. Thome,et al.  Boiling heat transfer and two-phase pressure drops within compact plate heat exchangers: Experiments and flow visualizations , 2016 .

[27]  G. Longo,et al.  A new model for refrigerant boiling inside Brazed Plate Heat Exchangers (BPHEs) , 2015 .

[28]  Somchai Wongwises,et al.  Experimental study of single-phase heat transfer and pressure drop inside a plate heat exchanger with a rough surface , 2015 .

[29]  Anna P. Yuzbashyan,et al.  Shell-and-plate Heat Exchangers for Efficient Heat Recovery Under the Industrial Application , 2015 .

[30]  Michael M. Ohadi,et al.  Numerical modeling and thermal optimization of a single-phase flow manifold-microchannel plate heat exchanger , 2015 .

[31]  Yongchan Kim,et al.  Flow boiling heat transfer and pressure drop of water in a plate heat exchanger with corrugated channels at low mass flux conditions , 2014 .

[32]  Tariq S. Khan,et al.  Evaporation heat transfer and pressure drop of ammonia in a mixed configuration chevron plate heat exchanger , 2014 .

[33]  Hoseong Lee,et al.  Experimental investigations on flow boiling heat transfer in plate heat exchanger at low mass flux condition , 2013 .

[34]  A. Coronas,et al.  ASSESSMENT OF BOILING HEAT TRANSFER AND PRESSURE DROP CORRELATIONS OF AMMONIA/ WATER MIXTURE IN A PLATE HEAT EXCHANGER , 2012 .

[35]  T. J. Sheer,et al.  Heat transfer and pressure drop in plate heat exchanger refrigerant evaporators , 2012 .

[36]  A. Coronas,et al.  Flow boiling heat transfer of ammonia/water mixture in a plate heat exchanger , 2010 .

[37]  J. H. Kim,et al.  Local boiling heat transfer characteristics of ammonia in a vertical plate evaporator , 2010 .

[38]  G. Longo,et al.  Heat transfer and pressure drop during HFC refrigerant vaporisation inside a brazed plate heat exchanger , 2007 .

[39]  Young Soo Kim,et al.  Experimental Study on R-410a Evaporation Heat Transfer Characteristics in Oblong Shell and Plate Heat Exchanger , 2007 .

[40]  Somchai Wongwises,et al.  Flow pattern and pressure drop of vertical upward gas–liquid flow in sinusoidal wavy channels , 2006 .

[41]  Tsing-Fa Lin,et al.  Saturated flow boiling heat transfer and pressure drop of refrigerant R-410A in a vertical plate heat exchanger , 2002 .

[42]  R. M. Manglik,et al.  Experimental Study of Turbulent Flow Heat Transfer and Pressure Drop in a Plate Heat Exchanger With Chevron Plates , 1999 .

[43]  Ismail Celik,et al.  Calculation of Numerical Uncertainty Using Richardson Extrapolation: Application to Some Simple Turbulent Flow Calculations , 1995 .

[44]  P. Roache.  Perspective: A Method for Uniform Reporting of Grid Refinement Studies , 1994 .

[45]  W. Focke,et al.  The effect of the corrugation inclination angle on the thermohydraulic performance of plate heat exchangers , 1985 .

[46]  Qi Zhang,et al.  NUMERICAL STUDY OF FLOW AND HEAT TRANSFER CHARACTERISTICS IN SHELL-AND-PLATE HEAT EXCHANGERS , 2022, Heat Transfer Research.

[47]  F. Haglind,et al.  Computational fluid dynamics modeling of liquid–gas flow patterns and hydraulics in the cross-corrugated channel of a plate heat exchanger , 2020 .

[48]  J. Thome,et al.  Flow boiling and frictional pressure gradients in plate heat exchangers. Part 2: Comparison of literature methods to database and new prediction methods , 2016 .

[49]  Nema Shive Dayal Pandey.  Experimental investigation of heat transfer and friction factor in a corrugated plate heat exchanger , 2011 .

[50]  H. Müller-Steinhagen,et al.  Gas/Liquid Flow in Plate-and-Frame Heat Exchangers - Part II: Two-Phase Multiplier and Flow Pattern Analysis , 2001 .

[51]  P. Roache.  QUANTIFICATION OF UNCERTAINTY IN COMPUTATIONAL FLUID DYNAMICS , 1997 .

[52]  Hemaunt Kumar,et al.  THE PLATE HEAT EXCHANGER: CONSTRUCTION AND DESIGN , 1984 .

[53]  R. Lockhart.  Proposed Correlation of Data for Isothermal Two-Phase, Two-Component Flow in Pipes , 1949 .