The application of thick-film technology in C-MEMS

Laminated 3D structures made using low-temperature co-fired ceramic (LTCC) technology are practical for ceramic micro-electro-mechanical systems (C-MEMS). The sensors for mechanical quantities, and/or actuators, are fundamental parts of MEMS. Thick-film resistors can be used to sense the mechanical deformations, and thick-film piezoelectric materials can be used as electro-mechanical transducers in a C-MEMS structure. The integration of these thick-film materials on LTCC substrates is in some cases difficult to realise due to interactions with the rather glassy LTCC substrates. The subject of our work is an investigation of thick-film materials for electro-mechanical transducers (sensors and actuators) and their compatibility with LTCC substrates. Resistors made with commercial thick-film resistor materials for use as sensors on LTCC substrates have been investigated and evaluated. Ferroelectric ceramic materials based on solid solutions of lead zirconate titanate (PZT) with low firing temperatures around 850°C were developed for thick-film technology and evaluated on LTCC substrates.

[1]  Torsten Thelemann,et al.  Using LTCC for microsystems , 2002 .

[2]  M. Hrovat,et al.  An evaluation of some commercial thick film resistor materials for strain gauges , 1994 .

[3]  M. Hrovat,et al.  A characterisation of thick film resistors for strain gauge applications , 2001 .

[4]  M. Hrovat,et al.  Characterization of PZT thick films fired on LTCC substrates , 2003 .

[5]  T. Maeder,et al.  Critical behaviour of the piezoresistive response in RuO2-glass composites , 2002, cond-mat/0212319.

[6]  Jonathan J. Bernstein,et al.  Dielectric, ferroelectric, and piezoelectric properties of lead zirconate titanate thick films on silicon substrates , 1995 .

[7]  R. Dell’acqua.  Sensors: A Great Chance For Microelectronic Technologies , 1995 .

[8]  Interactions between Ruthenia‐Based Resistors and Cordierite–Glass Substrates in Low‐Temperature Co‐fired Ceramics , 2000 .

[9]  M. Kosec,et al.  Preparation and electromechanical properties of PZT/PGO thick films on alumina substrate , 2001 .

[10]  Jau-Ho Jean,et al.  Camber development during cofiring Ag-based low-dielectric-constant ceramic package , 1997 .

[11]  Darko Belavic,et al.  The influence of firing temperature on the electrical and microstructural characteristics of thick-film resistors for strain gauge applications , 2003 .

[12]  N. White,et al.  Thick-film sensors : past, present and future , 1997 .

[13]  T. Maeder,et al.  High-strength ceramic substrates for thick-film sensor applications , 2003 .