The effect of actuator bending on Lamb wave displacement fields generated by a piezoelectric patch

A Lamb wave is a special type of elastic wave that is widely employed in structural health monitoring systems for damage detection. Recently, piezoelectric (piezo) patches have become popular for Lamb wave excitation and sensing because one piezo patch can serve as both the actuator and the sensor. All published work has assumed that the Lamb wave displacement field generated by a piezo patch actuator is axi-symmetric. However, we observed that piezo sensors placed at equal distances from the piezo patch actuator displayed different responses. In order to understand this phenomenon, we used a laser vibrometer to measure the full-field displacements around a circular piezo actuator noncontactly. The displacement fields excited by the piezo patch actuator are found to be directional, and this directionality is also frequency dependent, indicating that the out-of-plane bending dynamics of the piezo actuator may play an important role in the Lamb wave displacement fields. A simulation model that incorporates the bending deformation of the piezo patch into the calculations of the Lamb wave generation is then developed. The agreement between the simulated and measured displacement fields confirmed that the directionality of the Lamb wave displacement fields is governed by the bending deformation of the piezo patch actuator.

[1]  J. D. Achenbach,et al.  Reciprocity in Elastodynamics: Reciprocity in acoustics , 2004 .

[2]  Joseph L. Rose,et al.  A comparison of embedded sensor Lamb wave ultrasonic tomography approaches for material loss detection , 2006 .

[3]  Victor Giurgiutiu,et al.  Corrosion damage detection with piezoelectric wafer active sensors , 2004, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[4]  Chun H. Wang,et al.  Mindlin plate theory for damage detection: Source solutions , 2004 .

[5]  F. Yuan,et al.  Group velocity and characteristic wave curves of Lamb waves in composites: Modeling and experiments , 2007 .

[6]  Victor Giurgiutiu,et al.  Characterization of Piezoelectric Wafer Active Sensors , 2000 .

[7]  K. Graff.  Wave Motion in Elastic Solids , 1975 .

[8]  Ivan Bartoli,et al.  The response of rectangular piezoelectric sensors to Rayleigh and Lamb ultrasonic waves , 2007 .

[9]  Krishnan Balasubramaniam,et al.  Structural health monitoring of composite structures using Lamb wave tomography , 2004 .

[10]  Sébastien Grondel,et al.  Modelling of Lamb wave generation for application in health monitoring of composite plates , 2001, 2001 IEEE Ultrasonics Symposium. Proceedings. An International Symposium (Cat. No.01CH37263).

[11]  Christian Boller,et al.  Health Monitoring of Aerospace Structures , 2003 .

[12]  Moulin,et al.  Modeling of lamb waves generated by integrated transducers in composite plates using a coupled finite element-normal modes expansion method , 2000, The Journal of the Acoustical Society of America.

[13]  Constantinos Soutis,et al.  Damage detection in composite materials using lamb wave methods , 2002 .

[14]  Victor Giurgiutiu,et al.  Embedded-Ultrasonics Structural Radar for Nondestructive Evaluation of Thin-Wall Structures , 2002 .

[15]  Carlos E. S. Cesnik,et al.  Finite-dimensional piezoelectric transducer modeling for guided wave based structural health monitoring , 2005 .

[16]  R. Blevins,et al.  Formulas for natural frequency and mode shape , 1984 .

[17]  J. Rajagopalan,et al.  A phase reconstruction algorithm for Lamb wave based structural health monitoring of anisotropic multilayered composite plates , 2006 .

[18]  Victor Giurgiutiu,et al.  Simulation of the Lamb wave interaction between piezoelectric wafer active sensors and host structure , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[19]  Chung Bang Yun,et al.  PZT-based active damage detection techniques for steel bridge components , 2006 .

[20]  J. Rose.  Ultrasonic Waves in Solid Media , 1999 .

[21]  Yiu-Wing Mai,et al.  Delamination detection in smart composite beams using Lamb waves , 2004 .