Cyclic deformation responses in α-phase of a lamellar near β-Ti alloy

[1]  Y. Lin,et al.  On the {101‾1} twin-accommodated mechanisms in equiaxed near β-Ti alloys operating by unidirectional and cross rolling , 2020 .

[2]  Yong Liu,et al.  Stress accommodation by α to α″ transformation at the{101¯1}twin boundary in a cold-rolled Ti-5at.% Al alloy , 2019 .

[3]  Y. Lin,et al.  Comparing the evolution and deformation mechanisms of lamellar and equiaxed microstructures in near β-Ti alloys during hot deformation , 2019, Materials Science and Engineering: A.

[4]  Q. Peng,et al.  Interactive contraction nanotwins-stacking faults strengthening mechanism of Mg alloys , 2019, Acta Materialia.

[5]  Y. Lin,et al.  Deformation-induced variations in microstructure evolution and mechanical properties of bi-modal Ti-55511 titanium alloy , 2019, Journal of Alloys and Compounds.

[6]  Rui Yang,et al.  Reversible Displacive Transformation with Continuous Transition Interface in a Metastable β Titanium Alloy , 2019, Acta Materialia.

[7]  T. Lampke,et al.  The room temperature tensile deformation behavior of thermomechanically processed β-metastable Ti-Nb-Ta-Zr bio-alloy: the role of deformation-induced martensite , 2018, Materials Science and Engineering: A.

[8]  Yanyao Jiang,et al.  Secondary twin variant selection in four types of double twins in titanium , 2018, Acta Materialia.

[9]  Xigen Zhou,et al.  Role of martensite decomposition in tensile properties of selective laser melted Ti-6Al-4V , 2018 .

[10]  S. Ringer,et al.  On the role of twinning and stacking faults on the crystal plasticity and grain refinement in magnesium alloys , 2018 .

[11]  Q. Peng,et al.  Achieving High Strength and Ductility in Magnesium Alloys via Densely Hierarchical Double Contraction Nanotwins. , 2017, Nano letters.

[12]  C. Tasan,et al.  Origin of shear induced β to ω transition in Ti–Nb-based alloys , 2015 .

[13]  D. Dye,et al.  The effect of grain size on the twin initiation stress in a TWIP steel , 2015 .

[14]  J. Molina-Aldareguia,et al.  Origin of the twinning to slip transition with grain size refinement, with decreasing strain rate and with increasing temperature in magnesium , 2015 .

[15]  Daokui Xu,et al.  Relationship between fatigue crack initiation and activated {101¯2} twins in as-extruded pure magnesium , 2013 .

[16]  F. Prima,et al.  Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects , 2013 .

[17]  K. Xue,et al.  Cyclic deformation response and micromechanisms of Ti alloy Ti–5Al–5V–5Mo–3Cr–0.5Fe , 2011 .

[18]  Jie Zhou,et al.  Cyclic Deformation Response of β-Annealed Ti-5Al-5V-5Mo-3Cr Alloy Under Compressive Loading Conditions , 2011 .

[19]  J. Driver,et al.  Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals , 2011 .

[20]  E. Lavernia,et al.  Grain size and reversible beta-to-omega phase transformation in a Ti alloy , 2010 .

[21]  A. Luo,et al.  Effect of strain ratio and strain rate on low cycle fatigue behavior of AZ31 wrought magnesium alloy , 2009 .

[22]  S. Hanada,et al.  α′ Martensite Ti–V–Sn alloys with low Young's modulus and high strength , 2007 .

[23]  J. Jonas,et al.  Twinning-induced softening in polycrystalline AM30 Mg alloy at moderate temperatures , 2006 .

[24]  Gregory B Olson,et al.  Kinetics of strain-induced martensitic nucleation , 1975 .