Fabrication and electrochemical properties of surface modified sulfonated poly(vinylidenefluoride-co-hexafluoropropylene) membranes for DMFC application

Abstract Surface modification of sulfonated poly(vinylidenefluoride-co-hexafluoropropylene) (sPVdF-co-HFP) membrane was attempted by blending with differently charged surface modifying macromolecules (cSMMs) with different polyols. The prepared membranes were characterized using Fourier transform infrared spectroscopy, thermal analysis, mechanical properties, ion exchange capacity, atomic force microscopy, contact angle, and water uptake. The ionic conductivities of the prepared membranes are in the order of 10 −3 S cm −1. The proton conductivity was found to be dependent upon the water uptake of the membranes. Among the modified membranes, the sPVdF-co-HFP/cSMM-1 (2 × 10 −7 cm2 s −1) blended membrane shows lower methanol permeability whereas the sPVdF-co-HFP/cSMM-4 (5 × 10− 3 S cm −1) blended membrane indicates the highest proton conductivity. However, the sPVdF-co-HFP/cSMM-2 (21.8 × 103 S cm −3 s) blended membrane exhibits the highest overall membrane characteristic value. These characteristics make the prepared membranes a promising electrolyte for direct methanol fuel cell application.

[1]  A. Manthiram,et al.  Synthesis and characterization of polysulfone-containing sulfonated side chains for direct methanol fuel cells , 2011 .

[2]  T. Matsuura,et al.  MEMBRANE CHARACTERIZATION BY SOLUTE TRANSPORT AND ATOMIC FORCE MICROSCOPY , 1998 .

[3]  Mohamed Khayet,et al.  Characterization of membranes for membrane distillation by atomic force microscopy and estimation of their water vapor transfer coefficients in vacuum membrane distillation process , 2004 .

[4]  V. Parmon,et al.  Transport properties of modified Nafion membranes: Effect of zeolite and precursors , 2010 .

[5]  K. Oyaizu,et al.  Synthesis and properties of novel sulfonated arylene ether/fluorinated alkane copolymers , 2001 .

[6]  A. Ismail,et al.  PSSA pore-filled PVDF membranes by simultaneous electron beam irradiation: Preparation and transport characteristics of protons and methanol , 2006 .

[7]  Wencong Liu,et al.  Crosslinked organic/inorganic proton exchange membranes with multilayer structure , 2012 .

[8]  Dong Min Kim,et al.  Synthesis and characterization of sulfonated poly(ether sulfone)s containing DHTPE for PEMFC , 2012 .

[9]  Mahendra Kumar,et al.  Organic-inorganic hybrid alkaline membranes by epoxide ring opening for direct methanol fuel cell applications , 2010 .

[10]  T. Matsuura,et al.  Morphological study of fluorinated asymmetric polyetherimide ultrafiltration membranes by surface modifying macromolecules , 2003 .

[11]  Angelika Heinzel,et al.  A review of the state-of-the-art of the methanol crossover in direct methanol fuel cells , 1999 .

[12]  A. Ismail,et al.  Characterization and performance of proton exchange membranes for direct methanol fuel cell: Blending of sulfonated poly(ether ether ketone) with charged surface modifying macromolecule , 2008 .

[13]  K. Kreuer.  On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells , 2001 .

[14]  Ayhan Bozkurt,et al.  Nanocomposite membranes based on sulfonated polysulfone and sulfated nano-titania/NMPA for proton exchange membrane fuel cells , 2014 .

[15]  M. Torkkeli,et al.  The state of water and the nature of ion clusters in crosslinked proton conducting membranes of styrene grafted and sulfonated poly(vinylidene fluoride) , 2000 .

[16]  Bruno Scrosati,et al.  Nanoporous composite, low cost, protonic membranes for direct methanol fuel cells , 2006 .

[17]  C. Detrembleur,et al.  Beneficial effect of carbon nanotubes on the performances of Nafion membranes in fuel cell applications , 2007 .

[18]  M. Othman,et al.  Effect of operating temperature on the behavior of promising SPEEK/cSMM electrolyte membrane for DMFCs , 2013 .

[19]  Jianhong Liu,et al.  Synthesis and preparation of sulfonated hyperbranched poly(arylene ether sulfone)/poly(ether sulfone) blend membranes for proton exchange membranes , 2012 .

[20]  S. Srinivasan,et al.  A comparison of physical properties and fuel cell performance of Nafion and zirconium phosphate/Nafion composite membranes , 2003, physics/0310029.

[21]  C.J.T. de Grotthuss.  Memoir on the decomposition of water and of the bodies that it holds in solution by means of galvanic electricity , 2006 .

[22]  T. Matsuura,et al.  Surface modifications for antifouling membranes. , 2010, Chemical reviews.

[23]  A. Ismail,et al.  Transport properties and direct methanol fuel cell performance of sulfonated poly (ether ether ketone)/cloisite/triaminopyrimidine nanocomposite polymer electrolyte membrane at moderate temperature , 2013 .

[24]  Adolphe Chapiro,et al.  Radiation Chemistry of Polymeric Systems , 1962 .

[25]  P. Ghosh,et al.  Studies on N-methylene phosphonic chitosan/poly(vinyl alcohol) composite proton-exchange membrane , 2006 .

[26]  Y. Nho,et al.  Irradiated PVdF-HFP–tin oxide composite membranes for the applications of direct methanol fuel cells , 2010 .

[27]  T. Matsuura,et al.  Development of novel charged surface modifying macromolecule blended PES membranes to remove EDCs and PPCPs from drinking water sources , 2014 .

[28]  S. Srinivasan,et al.  Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000 Part I. Fundamental scientific aspects , 2001 .

[29]  T. Matsuura,et al.  Towards antibiofouling ultrafiltration membranes by blending silver containing surface modifying macromolecules. , 2012, Chemical communications.

[30]  Chang-Soo Kim,et al.  Preparation and characterization of proton-conducting sulfonated poly(ether ether ketone)/phosphatoantimonic acid composite membranes , 2007 .

[31]  Ahmad Fauzi Ismail,et al.  Physicochemical study of poly(ether ether ketone) electrolyte membranes sulfonated with mixtures of fuming sulfuric acid and sulfuric acid for direct methanol fuel cell application , 2007 .

[32]  A. Ismail,et al.  Study on synthesis and physical properties of charged surface modifying macromolecules with different end-capping materials for membrane applications , 2012 .

[33]  Chuan Yi Tang,et al.  A 2.|E|-Bit Distributed Algorithm for the Directed Euler Trail Problem , 1993, Inf. Process. Lett..

[34]  Young Moo Lee,et al.  Preparation and characterization of crosslinked PVA/SiO2 hybrid membranes containing sulfonic acid groups for direct methanol fuel cell applications , 2004 .

[35]  B. P. Tripathi,et al.  3-[[3-(Triethoxysilyl)propyl]amino]propane-1-sulfonic acid-poly(vinyl alcohol) cross-linked zwitterionic polymer electrolyte membranes for direct methanol fuel cell applications. , 2009, ACS applied materials & interfaces.

[36]  A. Ismail,et al.  The effect of blending sulfonated poly(ether ether ketone) with various charged surface modifying macromolecules on proton exchange membrane performance , 2009 .

[37]  Geping Yin,et al.  Methanol permeability in sulfonated poly(etheretherketone) membranes: A comparison with Nafion membranes , 2006 .

[38]  J. Maier,et al.  Electroosmotic drag in polymer electrolyte membranes: an electrophoretic NMR study , 1999 .

[39]  P. P. Kundu,et al.  Partial sulfonation of PVdF-co-HFP: A preliminary study and characterization for application in direct methanol fuel cell , 2014 .

[40]  M. Guiver,et al.  Influence of silica content in sulfonated poly(arylene ether ether ketone ketone) (SPAEEKK) hybrid membranes on properties for fuel cell application , 2006 .

[41]  Jung-Ki Park,et al.  Characteristics of PVdF copolymer/Nafion blend membrane for direct methanol fuel cell (DMFC) , 2004 .