Ground Tire Rubber Modified by Ethylene-Vinyl Acetate Copolymer: Processing, Physico-Mechanical Properties, Volatile Organic Compounds Emission and Recycling Possibility

Ground tire rubber (GTR) was reclaimed and modified with 10 phr of ethylene-vinyl acetate copolymer via low-temperature extrusion process. Processing, physico-mechanical properties, volatile organic compounds emission, and recycling possibility were investigated. In order to better understand the impact of used modifiers, their efficiency was compared with trans-polyoctenamer, which is an additive that is commercially dedicated to waste rubber recycling. The results showed that a relatively small amount of ethylene-vinyl acetate copolymer improves the mechanical properties of modified reclaimed GTR and also allows further recycling by multiple processing without the deterioration of performance after three cycles.

[1]  G. Cai,et al.  Evaluation of engineering properties and environmental effect of recycled waste tire-sand/soil in geotechnical engineering: A compressive review , 2020 .

[2]  L. Picado-Santos,et al.  Crumb rubber asphalt mixtures: A literature review , 2020 .

[3]  A. Hejna,et al.  POM/EVA Blends with Future Utility in Fused Deposition Modeling , 2020, Materials.

[4]  A. Hejna,et al.  Waste tire rubber as low-cost and environmentally-friendly modifier in thermoset polymers - A review. , 2020, Waste management.

[5]  Tung-Chai Ling,et al.  Functions and impacts of plastic/rubber wastes as eco-friendly aggregate in concrete – A review , 2020 .

[6]  Md Tareq Rahman,et al.  Recycling waste rubber tyres in construction materials and associated environmental considerations: A review , 2020 .

[7]  Y. Zhuge,et al.  A comprehensive review on the mechanical properties of waste tire rubber concrete , 2020 .

[8]  M. Marć Emissions of selected monoaromatic hydrocarbons as a factor affecting the removal of single-use polymer barbecue and kitchen utensils from everyday use. , 2020, The Science of the total environment.

[9]  D. Rodrigue,et al.  Waste Rubber Recycling: A Review on the Evolution and Properties of Thermoplastic Elastomers , 2020, Materials.

[10]  Tamás Bárány,et al.  Microwave devulcanization of ground tire rubber and applicability in SBR compounds , 2020, Journal of Applied Polymer Science.

[11]  S. Karthikeyan,et al.  Recycling of waste tires and its energy storage application of by-products –a review , 2019 .

[12]  K. Formela,et al.  Reclaimed Rubber in Situ Grafted with Soybean Oil as a Novel Green Reactive Plasticizer in SBR/Silica Compounds , 2019, ACS Sustainable Chemistry & Engineering.

[13]  J. D. Ambrósio,et al.  Devulcanization of natural rubber compounds by extrusion using thermoplastics and characterization of revulcanized compounds , 2019, Journal of Polymer Research.

[14]  M. Saeb,et al.  Preliminary Investigation on Auto-Thermal Extrusion of Ground Tire Rubber , 2019, Materials.

[15]  A. Hejna,et al.  Microwave treatment in waste rubber recycling – recent advances and limitations , 2019, Express Polymer Letters.

[16]  N. Aït Hocine,et al.  Thermo-mechanical devulcanization and recycling of rubber industry waste , 2019, Resources, Conservation and Recycling.

[17]  K. Bisht,et al.  Waste to resource conversion of crumb rubber for production of sulphuric acid resistant concrete , 2019, Construction and Building Materials.

[18]  R. Stuetz,et al.  Identification of VOCs from natural rubber by different headspace techniques coupled using GC-MS. , 2019, Talanta.

[19]  M. Saeb,et al.  Synergistic Effects of Bitumen Plasticization and Microwave Treatment on Short-Term Devulcanization of Ground Tire Rubber , 2018, Polymers.

[20]  J. S. Pereira,et al.  Characterization of waste tire rubber devulcanized in twin-screw extruder with thermoplastics , 2018 .

[21]  Shifeng Wang,et al.  Vegetable derived-oil facilitating carbon black migration from waste tire rubbers and its reinforcement effect. , 2018, Waste management.

[22]  D. Rodrigue,et al.  Production of Thermoplastic Elastomers Based on Recycled PE and Ground Tire Rubber: Morphology, Mechanical Properties and Effect of Compatibilizer Addition , 2018, International Polymer Processing.

[23]  Gaël Colomines,et al.  Thermo-mechanical recycling of rubber: Relationship between material properties and specific mechanical energy , 2018 .

[24]  Zonglin Peng,et al.  Liquefaction of ground tire rubber at low temperature. , 2018, Waste management.

[25]  M. Marć,et al.  An investigation of selected monoaromatic hydrocarbons released from the surface of polystyrene lids used in coffee-to-go cups , 2017 .

[26]  C. Nakason,et al.  Influence of ground tire rubber devulcanization conditions on properties of its thermoplastic vulcanizate blends with copolyester , 2016 .

[27]  K. Formela,et al.  Thermomechanical reclaiming of ground tire rubber via extrusion at low temperature: Efficiency and limits , 2016 .

[28]  S. Ramarad,et al.  Irradiation cross-linking of ethylene vinyl acetate/waste tire dust , 2016 .

[29]  M. Saeb,et al.  Investigating the combined impact of plasticizer and shear force on the efficiency of low temperature reclaiming of ground tire rubber (GTR) , 2016 .

[30]  Marina Lasagni,et al.  Mechanical and rheological properties of natural rubber compounds containing devulcanized ground tire rubber from several methods , 2015 .

[31]  J. A. Lima,et al.  Devulcanization of ground tire rubber: Physical and chemical changes after different microwave exposure times , 2015 .

[32]  K. Formela,et al.  Investigation of volatile low molecular weight compounds formed during continuous reclaiming of ground tire rubber , 2015 .

[33]  M. Khalid,et al.  Improving the properties of reclaimed waste tire rubber by blending with poly(ethylene-co-vinyl acetate) and electron beam irradiation , 2014 .

[34]  Zhenxiang Xin,et al.  The Effect of Reclaim Softener on Properties of Reclaimed Rubber , 2014 .

[35]  Characteristics Studies of Waste Tire Rubber Powders using the Different Grinding Methods , 2014 .

[36]  K. Formela,et al.  Effect of Compounding Conditions on Static and Dynamic Mechanical Properties of High Density Polyethylene/Ground Tire Rubber Blends , 2014 .

[37]  S. Ramarad,et al.  Effect of Pre-Irradiation of Waste Tire Dust on the Properties of Ethylene Vinyl Acetate/Waste Tire Dust Blend (EVA/WTD) Blends , 2013 .

[38]  Rebe Feraldi,et al.  Comparative LCA of treatment options for US scrap tires: material recycling and tire-derived fuel combustion , 2013, The International Journal of Life Cycle Assessment.

[39]  L. Mészáros,et al.  Mechanical properties of recycled LDPE/EVA/ground tyre rubber blends: Effects of EVA content and postirradiation , 2012 .

[40]  Fernando Pacheco-Torgal,et al.  Properties and durability of concrete containing polymeric wastes (tyre rubber and polyethylene terephthalate bottles): An overview , 2012 .

[41]  G. Ginsberg,et al.  Human Health Risk Assessment of Synthetic Turf Fields Based Upon Investigation of Five Fields in Connecticut , 2011, Journal of toxicology and environmental health. Part A.

[42]  T. Yaw,et al.  Performance of Irradiated and Crosslinked Ethylene Vinyl Acetate/Waste Tire Dust Blend , 2011 .

[43]  J. Kovács,et al.  The Effect of EVA Content on the Processing Parameters and the Mechanical Properties of LDPE/Ground Tire Rubber Blends , 2008 .

[44]  J Gerrard,et al.  Is European end-of-life vehicle legislation living up to expectations? Assessing the impact of ELV Directive on "green" innovation and vehicle recovery , 2007 .

[45]  Y. Honda,et al.  Degradation of vulcanized and nonvulcanized polyisoprene rubbers by lipid peroxidation catalyzed by oxidative enzymes and transition metals. , 2003, Biomacromolecules.

[46]  J. Morand Chain Scission in the Oxidation of Polyisoprene , 1977 .

[47]  P. Flory,et al.  STATISTICAL MECHANICS OF CROSS-LINKED POLYMER NETWORKS II. SWELLING , 1943 .

[48]  P. Flory,et al.  Statistical Mechanics of Cross‐Linked Polymer Networks I. Rubberlike Elasticity , 1943 .