Design of vertical climbing robot with compliant foot

This paper presents ICBot (inchworm-like robot with claws), a vertical climbing robot which uses inchworm-like motion and bidirectional claws. The robot mainly consists of four parts, upper support, lower support, crank-slider mechanism between them, and compliant feet with bidirectional claws. A single motor drives the crank-slider mechanism, resulting in lower support and upper support move relatively, just like the inchworm motion. The bidirectional claws make the robot attach and release easily. ICBot measures 12cm in length and 30g in weight. It is capable of climbing vertical pearl brocade plate, softwood and other soft or rough surface.

[1]  W. Barnes,et al.  Adhesion and Detachment of the Toe Pads of Tree Frogs , 1991 .

[2]  Tobias Seidl,et al.  Getting a grip on spider attachment: an AFM approach to microstructure adhesion in arthropods , 2004 .

[3]  Robert J. Wood,et al.  Design of centimeter-scale inchworm robots with bidirectional claws , 2011, 2011 IEEE International Conference on Robotics and Automation.

[4]  Mark R. Cutkosky,et al.  Smooth Vertical Surface Climbing With Directional Adhesion , 2008, IEEE Transactions on Robotics.

[5]  Metin Sitti,et al.  Waalbot II: Adhesion Recovery and Improved Performance of a Climbing Robot using Fibrillar Adhesives , 2011, Int. J. Robotics Res..

[6]  Mark R. Cutkosky,et al.  Biologically inspired climbing with a hexapedal robot , 2008, J. Field Robotics.

[7]  Mark R. Cutkosky,et al.  Gecko-inspired climbing behaviors on vertical and overhanging surfaces , 2008, 2008 IEEE International Conference on Robotics and Automation.

[8]  Ronald S. Fearing,et al.  CLASH: Climbing vertical loose cloth , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[9]  S. Gorb,et al.  Roughness-dependent friction force of the tarsal claw system in the beetle Pachnoda marginata (Coleoptera, Scarabaeidae). , 2002, The Journal of experimental biology.

[10]  Metin Sitti,et al.  Gecko inspired micro-fibrillar adhesives for wall climbing robots on micro/nanoscale rough surfaces , 2008, 2008 IEEE International Conference on Robotics and Automation.

[11]  Lazarus Walter Macior,et al.  Insect Adaptation and Behavior in Asclepias pollination , 1965 .

[12]  R. Full,et al.  Evidence for van der Waals adhesion in gecko setae , 2002, Proceedings of the National Academy of Sciences of the United States of America.

[13]  Jonathan E. Clark,et al.  Towards Penetration-based Clawed Climbing , 2005 .

[14]  Sangbae Kim,et al.  SpinybotII: climbing hard walls with compliant microspines , 2005, ICAR '05. Proceedings., 12th International Conference on Advanced Robotics, 2005..

[15]  A B Kesel,et al.  Adhesion measurements on the attachment devices of the jumping spider Evarcha arcuata , 2003, Journal of Experimental Biology.

[16]  Mark R. Cutkosky,et al.  Scaling Hard Vertical Surfaces with Compliant Microspine Arrays , 2006, Int. J. Robotics Res..

[17]  Metin Sitti,et al.  Tankbot: A Palm-size, Tank-like Climbing Robot using Soft Elastomer Adhesive Treads , 2010, Int. J. Robotics Res..

[18]  Daniel E. Koditschek,et al.  Rapid pole climbing with a quadrupedal robot , 2009, 2009 IEEE International Conference on Robotics and Automation.

[19]  M. Sitti,et al.  Waalbot: An Agile Small-Scale Wall-Climbing Robot Utilizing Dry Elastomer Adhesives , 2007, IEEE/ASME Transactions on Mechatronics.

[20]  T. Eisner,et al.  Defense by foot adhesion in a beetle (Hemisphaerota cyanea). , 2000, Proceedings of the National Academy of Sciences of the United States of America.

[21]  R. Full,et al.  Adhesive force of a single gecko foot-hair , 2000, Nature.