Techno-Economic Related Metrics for a Wave Energy Converters Feasibility Assessment

When designing “multi-MW arrays” of Wave Energy Converters (WECs), having a low number of converters with high individual power ratings can be beneficial as the Operation and Maintenance (O&M) costs may be reduced. However, having converters of small dimensions or small power ratings could also be beneficial, as suggested by previous works, due to a reduction in material costs as compared to power production, and the use of small, inexpensive vessels. In this work, a case study investigating the optimum size of WEC for a 20 MW array is performed. Analysis is carried out based on the CorPower Ocean technology. In this case study, firstly a Levelized Cost of Energy (LCOE) model is created. This model incorporates the latest Capital Expenditure (CAPEX) estimates for CorPower Ocean’s 250 kW prototype. Using this techno-economic model, several sizes/ratings of WEC are tested for use in a 20 MW array. Operational Expenditure (OPEX) is calculated using two different calculation approaches in order to check its influence on final indicators. OPEX is firstly calculated as a percentage of CAPEX, as shown in previous works, and secondly using a failure-repair model, taking into account individual failures of WECs in the array. Size/rating analysis is carried out for several European locations in order to establish any dependence between site location and optimal WEC size/rating. Several metrics for techno-economic assessment of marine energy converters, other than LCOE, are compared in this work. A comparison of several devices with each these metrics is performed within this study.

[1]  T. Lewis,et al.  Operational expenditure costs for wave energy projects and impacts on financial returns , 2013 .

[2]  Kester Gunn,et al.  Quantifying the global wave power resource , 2012 .

[3]  Inigo J. Losada,et al.  Adaptability of a generic wave energy converter to different climate conditions , 2015 .

[4]  María Sicilia Salvadores.  Projected Costs of Generating Electricity , 1998 .

[5]  Julia Fernandez Chozas,et al.  User guide – COE Calculation Tool for Wave Energy Converters , 2014 .

[6]  Aurélien Babarit,et al.  A database of capture width ratio of wave energy converters , 2015 .

[7]  Aurélien Babarit,et al.  Numerical benchmarking study of a selection of wave energy converters , 2012 .

[8]  J. Weber.  WEC Technology Readiness and Performance Matrix – finding the best research technology development trajectory , 2012 .

[9]  Inigo J. Losada,et al.  Uncertainty analysis of wave energy farms financial indicators , 2014 .

[10]  Henry Jeffrey,et al.  Innovation and cost reduction for marine renewable energy: A learning investment sensitivity analysis , 2014 .

[11]  Karyn Morrissey,et al.  Quantifying the uncertainty of wave energy conversion device cost for policy appraisal: An Irish case study , 2015 .

[12]  Michael O'Connor,et al.  Techno-economic performance of the Pelamis P1 and Wavestar at different ratings and various locations in Europe , 2013 .

[13]  Jens Peter Kofoed,et al.  Marine Renewable Energies: Perspectives and Implications for Marine Ecosystems , 2013, TheScientificWorldJournal.

[14]  Inigo J. Losada,et al.  A global analysis of the operation and maintenance role on the placing of wave energy farms , 2015 .