Gas and solids mixing in a turbulent fluidized bed

Gas and solids mixing characteristics in the bubbling and turbulent regimes of a gas-solid fluidized bed are examined using helium and phosphor tracer techniques to obtain the gas and solids dispersion coefficients, respectively. The real time, quasi-3-D flow behavior is qualified and quantified by the electrical capacitance tomography (ECT) technique. The mixing behavior varies significantly with the flow regimes. As the gas velocity increases, axial and radial gas dispersion coefficients increase in the bubbling regime, reach a peak at U c , the transition velocity from the bubbling to turbulent regimes, and then decrease. In contrast, as the gas velocity increases, axial and radial solids dispersion coefficients increase in the bubbling regime and continuously increase through U c to the turbulent regime. Temperature and pressure have little effect on the gas and solids mixing behavior. A small quantity of fine particles is noted to drastically affect the gas and solids mixing behavior in the turbulent fluidized bed. The axial and radial dispersion coefficients of gas and solids reach their maximum when the fines content is about 15%. The ECT measurements illustrate the effect of adding fines on the flow behavior in the bed. A small quantity of fine particles disintegrate the bubble/void phase, significantly modifying bubble/void- and emulsion-phase mixing behavior.

[1]  M. Schiavetti,et al.  Quantitative estimation of bubble size in PFBC , 1994 .

[2]  Tomasz Dyakowski,et al.  Applications of electrical tomography for gas-solids and liquid-solids flows : a review , 2000 .

[3]  P. A. Ambler,et al.  Residence time distribution of solids in a circulating fluidized bed: Experimental and modelling studies , 1990 .

[4]  Fei Wei,et al.  Gas and solids mixing in a commercial FCC regenerator , 1993 .

[5]  W. J. Thiel,et al.  The mixing of solids in slugging gas fluidized beds , 1978 .

[6]  GAS MIXING IN SLUGGING AND TURBULENT FLUIDIZED BEDS , 1989 .

[7]  M. Judd,et al.  Fluidised beds of fine, dense powders: scale-up and reactor modelling , 1985 .

[8]  F. Wei,et al.  Lateral and Axial Mixing of the Dispersed Particles in CFB , 1995 .

[9]  Jamal Chaouki,et al.  Local solid mixing in gas–solid fluidized beds , 2001 .

[10]  Jinghai Li,et al.  An experimental comparison of gas backmixing in fluidized beds across the regime spectrum , 1989 .

[11]  John R. Grace,et al.  The effect of particle size distribution on the performance of a catalytic fluidized bed reactor , 1990 .

[12]  Tomasz Dyakowski,et al.  Application of capacitance tomography to gas-solid flows , 1997 .

[13]  Derek Geldart,et al.  Entrainment of FCC from fluidized beds — A new correlation for the elutriation rate constants Ki∞* , 1998 .

[14]  Gabriel Wild,et al.  Gas and solid behavior in cracking circulating fluidized beds , 1992 .

[15]  Sailesh Kumar,et al.  Gas‐holdup measurements in bubble columns using computed tomography , 1997 .

[16]  Richard A Williams,et al.  Process tomography: a European innovation and its applications , 1996 .

[17]  Jamal Chaouki,et al.  Gas phase hydrodynamics of a gas-solid turbulent fluidized bed reactor , 1996 .

[18]  H. Bi,et al.  A State-of-the-Art Review of Gas-Solid Turbulent Fluidization , 2000 .

[19]  Shigeo Uchida,et al.  Cross-sectional distributions of gas and solid holdups in slurry bubble column investigated by ultrasonic computed tomography , 1999 .

[20]  Derek Geldart,et al.  The physical models of cyclone diplegs in fluidized beds , 2001 .

[21]  J. Werther,et al.  Gas-solids mixing and flow structure modeling of the upper dilute zone of a circulating fluidized bed , 1995 .

[22]  S. Morooka,et al.  Transport Phenomena and Reaction in Fluidized Catalyst Beds , 1981 .

[23]  Hsiaotao Bi,et al.  Gas dispersion in fast fluidization and dense suspension upflow , 1999 .

[24]  K. Schügerl,et al.  Radiale und axiale Gasvermischung in Wirbelschichten , 1963 .

[25]  H. A. Lauwerier,et al.  Diffusion in a Fluid Moving at Uniform Velocity in a Tube , 1953 .

[26]  F. Wei,et al.  Axial and lateral dispersion of fine particles in a binary-solid riser , 1998 .

[27]  John G. Yates,et al.  Effects of temperature and pressure on gas-solid fluidization , 1996 .

[28]  S. D. Kim,et al.  Axial mixing of solids in turbulent fluidized beds , 1990 .

[29]  Wuqiang Yang,et al.  Role of tomography in gas/solids flow measurement , 2000 .

[30]  T. Kai,et al.  BEHAVIOR OF FLUIDIZED BEDS OF SMALL PARTICLES AT ELEVATED TEMPERATURES , 1985 .

[31]  Joseph Yerushalmi,et al.  Solids mixing in an expanded top fluid bed , 1985 .