Optimal Configurations of Wave Energy Converter Arrays with a Floating Body

Abstract An array of floating point-absorbing wave energy converters (WECs) is usually employed for extracting efficiently ocean wave energy. For deep water environment, it is more feasible and convenient to connect the absorbers array with a floating body, such as a semi-submersible bottom-moored disk, whose function is to act as the virtual seabed. In the present work, an array of identical floating symmetrically distributed cylinders in a coaxial moored disk as a wave energy device is proposed The power take-off (PTO) system in the wave energy device is assumed to be composed of a linear/nonlinear damper activated by the buoys heaving motion. Hydrodynamic analysis of the examined floating system is implemented in frequency domain. Hydrodynamic interferences between the oscillating bodies are accounted for in the corresponding coupled equations. The array layouts under the constraint of the disk, incidence wave directions, separating distance between the absorbers and the PTO damping are considered to optimize this kind of WECs. Numerical results with regular waves are presented and discussed for the axisymmetric system utilizing heave mode with these interaction factors, in terms of a specific numbers of cylinders and expected power production.

[1]  K. Budal.  Theory for Absorption of Wave Power by a System of Interacting Bodies , 1977 .

[2]  J. Falnes,et al.  Wave-power absorption by parallel rows of interacting oscillating bodies , 1982 .

[3]  P. McIver.  Some hydrodynamic aspects of arrays of wave-energy devices , 1994 .

[4]  P. Mciver,et al.  Comparison of methods for computing hydrodynamic characteristics of arrays of wave power devices , 1997 .

[5]  T. Stallard,et al.  Experimental measurements of irregular wave interaction factors in closely spaced arrays , 2009 .

[6]  C. C. Mei,et al.  Comparison of wave power extraction by a compact array of small buoys and by a large buoy , 2010 .

[7]  V. Venugopal,et al.  Optimal configurations of wave energy device arrays , 2010 .

[8]  A. Babarit.  Impact of long separating distances on the energy production of two interacting wave energy converters , 2010 .

[9]  Aurélien Babarit,et al.  Impact of wave interactions effects on energy absorption in large arrays of wave energy converters , 2012 .

[10]  R. E. Taylor,et al.  The interaction factor and directionality in wave energy arrays , 2012 .

[11]  Michael Conlon,et al.  Maximising Value of Electrical Networks for Wave Energy Converter Arrays , 2013 .

[12]  Jari M. Böling,et al.  Analytical study of the interaction between waves and cylindrical wave energy converters oscillating in two modes , 2013 .

[13]  Inigo J. Losada,et al.  Factors that influence array layout on wave energy farms , 2014 .

[14]  Malin Göteman,et al.  Methods of reducing power fluctuations in wave energy parks , 2014 .

[15]  Malin Göteman,et al.  Analytical and numerical approaches to optimizing fluid-structure interactions in wave energy parks , 2014 .

[16]  Malin Göteman,et al.  Optimizing wave energy parks with over 1000 interacting point-absorbers using an approximate analytical method , 2015 .

[17]  M. Jakubowski.  Influence of Pitting Corrosion on Fatigue and Corrosion Fatigue of Ship and Offshore Structures, Part II: Load - Pit - Crack Interaction , 2015 .

[18]  D. Konispoliatis,et al.  Hydrodynamic analysis of an array of interacting free-floating oscillating water column (OWC׳s) devices , 2016 .

[19]  R. Almar,et al.  Surf-Swash Interactions on a Low-Tide Terraced Beach , 2016 .

[20]  Wanan Sheng,et al.  Power Takeoff Optimization for Maximizing Energy Conversion of Wave-Activated Bodies , 2016, IEEE Journal of Oceanic Engineering.