Dynamic analysis of buildings for earthquake-resistant design

The proposed 2005 edition of the National Building Code of Canada specifies dynamic analysis as the preferred method for computing seismic design forces and deflections, while maintaining the equivalent static force method for areas of low seismicity and for buildings with certain height limitations. Dynamic analysis procedures are categorized as either linear (elastic) dynamic analysis, consisting of the elastic modal response spectrum method or the numerical integration linear time history method, or nonlinear (inelastic) response history analysis. While both linear and nonlinear analyses require careful analytical modelling, the latter requires additional considerations for proper simulation of hysteretic response and necessitates a special study that involves detailed review of design and supporting analyses by an independent team of engineers. The paper provides an overview of dynamic analysis procedures for use in seismic design, with discussions on mathematical modelling of structures, structural e...

[1]  M Holmes,et al.  COMBINED LOADING ON INFILLED FRAMES. , 1963 .

[2]  Bryan Stafford Smith,et al.  Behavior of Square Infilled Frames , 1966 .

[3]  R. Clough.  Effect of stiffness degradation on earthquake ductility requirements , 1966 .

[4]  James G. MacGregor,et al.  Analysis of reinforced concrete shear wall-frame structures , 1966 .

[5]  Melbourne Fernald Giberson,et al.  The response of nonlinear multi-story structures subjected to earthquake excitation , 1967 .

[6]  T. Takeda,et al.  Reinforced Concrete response to simulated earthquakes , 1970 .

[7]  Arthur H. Nilson,et al.  Design of concrete structures , 1972 .

[8]  Sozen,et al.  Behavior of Multistory Reinforced Concrete Frames During Earthquakes , 1972 .

[9]  R. Clough,et al.  Dynamics Of Structures , 1975 .

[10]  Vitelmo V. Bertero,et al.  Shear Behavior of Steel Frame Joints , 1975 .

[11]  T. Paulay,et al.  Reinforced Concrete Structures , 1975 .

[12]  S. Mahin,et al.  Nonlinear Seismic Response of a Coupled Wall System , 1976 .

[13]  H Krawinkler,et al.  Shear in Beam-Column Joints in Seismic Design of Steel Frames , 1978, Engineering Journal.

[14]  Rafael Riddell,et al.  Statistical analysis of the response of nonlinear systems subjected to earthquakes , 1979 .

[15]  Vitelmo V. Bertero,et al.  Hysteretic Behavior of ReinforcedConcrete Beam-ColumnSubassemblages , 1979 .

[16]  Sozen,et al.  Simple and Complex Models for Nonlinear Seismic Response of Reinforced Concrete Structures , 1979 .

[17]  A. T. Derecho,et al.  Coupled walls in earthquake-resistant buildings, modeling techniques and dynamic analysis , 1980 .

[18]  H. Banon,et al.  Seismic Damage in Reinforced Concrete Frames , 1981 .

[19]  Mehdi Saiidi,et al.  Hysteresis Models for Reinforced Concrete , 1982 .

[20]  Vitelmo V. Bertero,et al.  Modeling of R/C Joints under Cyclic Excitations , 1983 .

[21]  Murat Saatcioglu,et al.  Modelling hysteretic behaviour of coupled walls for dynamic analysis , 1983 .

[22]  William C. Schnobrich,et al.  Computed Nonlinear Seismic Response of R/C Wall-Frame Structures , 1984 .

[23]  Filip C. Filippou.  A Simple Model for Reinforcing Bar Anchorages Under Cyclic Excitations , 1985 .

[24]  William C. Schnobrich,et al.  Inelastic analysis of R/C coupled shear walls , 1985 .

[25]  William C. Schnobrich,et al.  Analytical models for the nonlinear seismic analysis of reinforced concrete structures , 1985 .

[26]  Morisco.  Inelastic behaviour of steel beam-columns , 1986 .

[27]  Daniel P. Abrams,et al.  Influence of Axial Force Variations on Flexural Behavior of Reinforced Concrete Columns , 1987 .

[28]  Christian Meyer,et al.  Analytical Modeling of Hysteretic Behavior of R/C Frames , 1987 .

[29]  M. Saatcioglu,et al.  Hysteretic Shear Model for Reinforced Concrete Members , 1989 .

[30]  Guney Ozcebe,et al.  HYSTERETIC BEHAVIOR OF ANCHORAGE SLIP IN R/C MEMBERS , 1992 .

[31]  Murat Saatcioglu,et al.  REINFORCEMENT ANCHORAGE SLIP UNDER MONOTONIC LOADING , 1992 .

[32]  Michel Bruneau,et al.  Ductile design of steel structures , 1997 .

[33]  Anil K. Chopra,et al.  Period formulas for moment-resisting frame buildings , 1997 .

[34]  Murat Saatcioglu,et al.  Analysis and Design of Concrete Columns for Confinement , 1999 .

[35]  Martha. Dominguez Morales.  Fundamental period of vibration for reinforced concrete buildings. , 2000 .

[36]  Ahmed Ghobarah,et al.  The August 17, 1999, Kocaeli (Turkey) earthquake - damage to structures , 2001 .

[37]  W. D. Liam Finn,et al.  Erratum: Ground motion amplification factors for the proposed 2005 edition of the National Building Code of Canada , 2003 .

[38]  Gail M. Atkinson,et al.  Development of seismic hazard maps for the proposed 2005 edition of the National Building Code of Canada , 2003 .

[39]  Arthur C. Heidebrecht.  Overview of seismic provisions of the proposed 2005 edition of the National Building Code of Canada , 2003 .

[40]  Soheil Yavari,et al.  Design for forces induced by seismic torsion , 2003 .

[41]  JagMohan Humar,et al.  Determination of seismic design forces by equivalent static load method , 2003 .

[42]  Tang Shougao.  Analysis of Damage on Reinforced Concrete Bent Workshop Building after Fire , 2005 .

[43]  Fema Publication.  NEHRP COMMENTARY ON THE GUIDELINES FOR THE SEISMIC REHABILITATION OF BUILDINGS , 2005 .