Modeling of L-lactide polymerization by reactive extrusion

The kinetics of L-lactide ring-opening polymerization initiated by stannous octoate and triphenylphosphine was investigated in a batch apparatus (Haake Rheocord Mixer). Based on the experimental data, a kinetic model is developed, considering a coordination-insertion mechanism. Reactive extrusion experiments were further conducted for the same polymerization process, on a co-rotating twin screw extruder. The melted material flow and mixing was described by using the Ludovic ® commercial simulator. Based on the developed kinetic model and simulated flow of L-lactide polymerization mixture, a mathematical model of reactive extrusion process is formulated, describing the evolutions of monomer conversion and average molecular weight along the extruder. The model is predicting with a reasonable good accuracy the experimental data.

[1]  Craig J. Hawker,et al.  Molecularly defined (L)‐lactic acid oligomers and polymers: Synthesis and characterization , 2008 .

[2]  I. Banu,et al.  A Study of L-Lactide Ring-Opening Polymerization Kinetics , 2007 .

[3]  R. Prud’homme,et al.  Synthesis and characterization of poly(L‐lactide)s and poly(D‐lactide)s of controlled molecular weight , 2007 .

[4]  Vineeth K Kumar,et al.  Mathematical Modeling of the Poly(lactic acid) Ring–Opening Polymerization Kinetics , 2007 .

[5]  Grigore Bozga,et al.  Modeling of polyurethane synthesis by reactive extrusion , 2006 .

[6]  P. Cassagnau,et al.  Study of mixing of liquid/polymer in twin screw extruder by residence time distribution , 2005 .

[7]  A. Albertsson,et al.  Mechanism of Ring-Opening Polymerization of 1,5-Dioxepan-2-one and l-Lactide with Stannous 2-Ethylhexanoate. A Theoretical Study , 2001 .

[8]  Donald Garlotta,et al.  A Literature Review of Poly(Lactic Acid) , 2001 .

[9]  H. Kricheldorf,et al.  Resorbable initiators for polymerizations of lactones , 2000 .

[10]  P. Degée,et al.  Single-step reactive extrusion of PLLA in a corotating twin-screw extruder promoted by 2-ethylhexanoic acid tin(II) salt and triphenylphosphine , 2000 .

[11]  P. Degée,et al.  Continuous reactive extrusion polymerisation of L‐lactide ― an engineering view , 2000 .

[12]  M. Mackay,et al.  Rheological properties of poly(lactides). Effect of molecular weight and temperature on the viscoelasticity of poly(l‐lactic acid) , 1999 .

[13]  P. Degée,et al.  Beneficial effect of triphenylphosphine on the bulk polymerization of L,L‐lactide promoted by 2‐ethylhexanoic acid tin (II) salt , 1999 .

[14]  L. Delamare,et al.  A global computer software for polymer flows in corotating twin screw extruders , 1998 .

[15]  Ramani Narayan,et al.  Reversible Kinetics and Thermodynamics of the Homopolymerization of l-Lactide with 2-Ethylhexanoic Acid Tin(II) Salt , 1997 .

[16]  Philippe Cassagnau,et al.  An ultraviolet method for the determination of the residence time distribution in a twin screw extruder , 1991 .

[17]  J. T. Keeton,et al.  Oxidative Stability of Batter‐Breaded Restructured Nuggets Processed from Prerigor Pork , 1988 .

[18]  G. D. Valle,et al.  Theoretical Computation of the Isothermal Flow Through the Reverse Screw Element of a Twin Screw Extrusion Cooker , 1988 .