Influence Prediction of Injury and Vibration on Adjacent Components of Spine Using Finite Element Methods

Objectives A three-dimensional finite element (FE) model of the lumbar spine L3–L5 segment, the ligaments of which were assumed to be nonlinear materials, was established based on the actual vertebra geometry to investigate the influence of the injury lumbar spine on its adjacent components on the condition of whole-body vibration. Several injury conditions of the spine components were assumed, such as facetectomy, nucleotomy, and removal of bony posterior elements. Methods The dynamic FE analyses were carried out for those FE conditions under cyclic compression loads at the frequencies of 5 and 10 Hz. Then a comparison between the dynamic results and the static results was conducted to analyze the influence of both the nucleus injury and the facet joint injury on the adjacent intervertebral discs. Results and Conclusions The results indicate that the lumbar spine exhibits not only vertical vibration but also the flexion—extension motion during vibration. The denucleation will cause high stress and large disc bulge on the disc annulus under vibration. The facet joints of lumbar spine can limit the motion amplitude of flexion—extension and protect both the posterior regions and the posterolateral regions of disc annulus from large strain and stress during vibration. The facet joint removal will increase the stress of disc annulus by around 15% at the posterior region for the conditions of nucleotomy or no vibration. The stress of annulus circumference is higher at the posterolateral region than that of other regions of annulus circumference, and the facet joint removal may exacerbate the intervertebral disc degeneration on the condition of whole-body vibration.

[1]  K Kaneda,et al.  Influence of Disc Degeneration on Mechanism of Thoracolumbar Burst Fractures , 1992, Spine.

[2]  M. Pope,et al.  Intervertebral Motion during Vibration , 1991, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[3]  N Yoganandan,et al.  Contribution of disc degeneration to osteophyte formation in the cervical spine: a biomechanical investigation , 2001, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[4]  G. Andersson,et al.  Discs Degenerate Before Facets , 1990, Spine.

[5]  N. Langrana,et al.  Modeling of facet articulation as a nonlinear moving contact problem: sensitivity study on lumbar facet response. , 1998, Journal of biomechanical engineering.

[6]  Tony S Keller,et al.  Force-deformation response of the lumbar spine: a sagittal plane model of posteroanterior manipulation and mobilization. , 2002, Clinical biomechanics.

[7]  E. Teo,et al.  PREDICTION OF BIOMECHANICAL CHARACTERISTICS OF INTACT AND INJURED LOWER THORACIC SPINE SEGMENT UNDER DIFFERENT LOADS , 2004 .

[8]  D G Wilder,et al.  Epidemiologic Studies of Low-Back Pain , 1980, Spine.

[9]  P. Brinckmann,et al.  Interlaminar Shear Stresses and Laminae Separation in a Disc: Finite Element Analysis of the L3‐L4 Motion Segment Subjected to Axial Compressive Loads , 1995, Spine.

[10]  A Shirazi-Adl,et al.  A finite element study of a lumbar motion segment subjected to pure sagittal plane moments. , 1986, Journal of biomechanics.

[11]  D W Hukins,et al.  Effect of removing the nucleus pulposus on the deformation of the annulus fibrosus during compression of the intervertebral disc. , 2000, Journal of biomechanics.

[12]  R. Brand,et al.  Toward an identification of mechanical parameters initiating periosteal remodeling: a combined experimental and analytic approach. , 1990, Journal of biomechanics.

[13]  Li-Xin Guo,et al.  Prediction of the Modal Characteristics of the Human Spine at Resonant Frequency Using Finite Element Models , 2005, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[14]  V K Goel,et al.  Effect of Disc Degeneration at One Level on the Adjacent Level in Axial Mode , 1991, Spine.

[15]  D. Maiman,et al.  Finite element modeling of the cervical spine: role of intervertebral disc under axial and eccentric loads. , 1999, Medical engineering & physics.

[16]  R. Herbert,et al.  Effect of extensor muscle activation on the response to lumbar posteroanterior forces. , 1993, Clinical biomechanics.

[17]  V K Goel,et al.  Effects of injury on the spinal motion segment mechanics in the axial compression mode. , 1989, Clinical biomechanics.

[18]  M. Pope,et al.  Spinal biomechanics. , 1993, Journal of biomechanical engineering.

[19]  A. M. Ahmed,et al.  Stress analysis of the lumbar disc-body unit in compression. A three-dimensional nonlinear finite element study. , 1984, Spine.

[20]  M. Pope,et al.  Etiology of Spondylolisthesis: Assessment of the Role Played by Lumbar Facet Joint Morphology , 1993, Spine.

[21]  Albert B. Schultz,et al.  Mechanical Properties of Human Lumbar Spine Motion Segments—Part II: Responses in Compression and Shear; Influence of Gross Morphology , 1979 .

[22]  N. Langrana,et al.  Role of Ligaments and Facets in Lumbar Spinal Stability , 1995, Spine.

[23]  A. Shirazi-Adl,et al.  Dynamics of Human Lumbar Intervertebral Joints: Experimental and Finite‐Element Investigations , 1992, Spine.

[24]  E C Teo,et al.  Poroelastic Analysis of Lumbar Spinal Stability in Combined Compression and Anterior Shear , 2004, Journal of spinal disorders & techniques.

[25]  H. Grootenboer,et al.  Adaptive bone-remodeling theory applied to prosthetic-design analysis. , 1987, Journal of biomechanics.

[26]  Vijay K Goel,et al.  Ability of the Finite Element Models to Predict Response of the Human Spine to Sinusoidal Vertical Vibration , 2003, Spine.

[27]  William C. Hutton,et al.  Can Variations in Intervertebral Disc Height Affect the Mechanical Function of the Disc? , 1996, Spine.

[28]  Hutton Wc,et al.  Can variations in intervertebral disc height affect the mechanical function of the disc , 1996 .

[29]  S. Smith,et al.  Modeling differences in the vibration response characteristics of the human body. , 2000, Journal of biomechanics.

[30]  Franz Konstantin Fuss,et al.  Effects of Cervical Cages on Load Distribution of Cancellous Core: A Finite Element Analysis , 2004, Journal of spinal disorders & techniques.

[31]  Hem Hunt,et al.  Isolation of Buildings from Ground Vibration: A Review of Recent Progress , 1991 .

[32]  E. Teo,et al.  Kinematics of the Thoracic T10–T11 Motion Segment: Locus of Instantaneous Axes of Rotation in Flexion and Extension , 2004, Journal of spinal disorders & techniques.

[33]  Etsuo Chosa,et al.  Mechanical analysis of the lumbar vertebrae in a three-dimensional finite element method model in which intradiscal pressure in the nucleus pulposus was used to establish the model , 2002, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.

[34]  Thomas R. Oxland,et al.  The Effect of Nucleotomy on Lumbar Spine Mechanics in Compression and Shear Loading , 2001, Spine.

[35]  V K Goel,et al.  Investigation of vibration characteristics of the ligamentous lumbar spine using the finite element approach. , 1994, Journal of biomechanical engineering.

[36]  E. Teo,et al.  Material Sensitivity Study on Lumbar Motion Segment (L2-L3) Under Sagittal Plane Loadings Using Probabilistic Method , 2005, Journal of spinal disorders & techniques.

[37]  B Hinz,et al.  Application of finite-element models to predict forces acting on the lumbar spine during whole-body vibration. , 2001, Clinical biomechanics.

[38]  D W Hukins,et al.  The effect of partial removal of the nucleus pulposus from the intervertebral disc on the response of the human annulus fibrosus to compression. , 2001, Clinical biomechanics.

[39]  Li-Xin Guo,et al.  Vibration Characteristics of the Human Spine Under Axial Cyclic Loads: Effect of Frequency and Damping , 2005, Spine.

[40]  M Nissan,et al.  A Study of Vertebra and Disc Geometric Relations of the Human Cervical and Lumbar Spine , 1986, Spine.

[41]  H P Wölfel,et al.  Determination of vibration-related spinal loads by numerical simulation. , 2001, Clinical biomechanics.