A bubble-activated micropump with high-frequency flow reversal

With the increasing demand for thermal management in electronic cooling applications, the development of heat dissipation devices has become extremely important. This paper presents the development of a novel bubble-activated micropump with high-frequency flow reversal using embedded electrodes in a closed fluidic microchannel. This bubble-activated micropump consists of a microfluidic chamber structure and microelectrodes on a glass substrate that is assembled using a polydimethylsiloxane (PDMS) elastic sheet. First, the bubble-activated micropump was fabricated on a silicon substrate by spin-coating, curing, and molding using negative photoresist SU-8 2035 as the mold material. Second, a phosphate buffer solution (PBS) was introduced into the micropump chamber to increase the heat dissipation rate via a bubble-based actuator oscillating at a frequency of 300 Hz. The measured maximum flow rate was 37.8 μL/min at an applied voltage of 5 V. This study furthers the development of cooling systems using a bubble-activated design by achieving stable performance.

[1]  Klaus Hofmann,et al.  A micromachined electrohydrodynamic (EHD) pump , 1991 .

[2]  Cheng-Hsien Liu,et al.  An Electrolysis-Bubble-Actuated Micropump Based on the Roughness Gradient Design of Hydrophobic Surface , 2007, Journal of Microelectromechanical Systems.

[3]  Susan Z. Hua,et al.  An electrolytically actuated micropump , 2004 .

[4]  Wouter Olthuis,et al.  A closed-loop controlled electrochemically actuated micro-dosing system , 2000 .

[5]  Cheng-Hsien Liu,et al.  A capillary system with thermal-bubble-actuated 1/spl times/N microfluidic switches via time-sequence power control for continuous liquid handling , 2006 .

[6]  D. J. Harrison,et al.  Electroosmotic pumping and electrophoretic separations for miniaturized chemical analysis systems , 1994 .

[7]  Liwei Lin,et al.  Transient Thermal Bubble Formation on Polysilicon Micro-Resisters , 2002 .

[8]  Carlos H. Mastrangelo,et al.  MICROFABRICATED PLASTIC CAPILLARY SYSTEMS WITH PHOTO-DEFINABLE HYDROPHILIC AND HYDROPHOBIC REGIONS , 1999 .

[9]  Chang-Jin Kim,et al.  Micropumping by directional growth and hydrophobic venting of bubbles , 2005, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005..

[10]  Andrea Prosperetti,et al.  A microfluidic ‘blinking bubble’ pump , 2005 .

[11]  O. Jeong,et al.  Fabrication and test of a thermopneumatic micropump with a corrugated p+ diaphragm , 2000 .

[12]  Andrea Prosperetti,et al.  Bubble-based micropump for electrically conducting liquids , 2001 .

[13]  Liwei Lin,et al.  A thermal-bubble-actuated micronozzle-diffuser pump , 2002 .

[14]  Peter Enoksson,et al.  A Valve-Less Diffuser Micropump for Microfluidic Analytical Systems , 2001 .

[15]  M. Burns,et al.  Microfabricated capillarity-driven stop valve and sample injector , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[16]  Neil M. White,et al.  A novel micromachined pump based on thick-film piezoelectric actuation , 1998 .

[17]  T. Kenny,et al.  Silicon electroosmotic micropumps for integrated circuit thermal management , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[18]  Olivier Français,et al.  Dynamic simulation of an electrostatic micropump with pull-in and hysteresis phenomena , 1998 .

[19]  A. Pisano,et al.  Characterization of a Micro-Mixing, Pumping, and Valving System , 2001 .

[20]  Dennis L. Polla,et al.  Design and simulation of an implantable medical drug delivery system using microelectromechanical systems technology , 2001 .

[21]  Christopher D. Batich,et al.  Fabrication and testing of a magnetically actuated micropump , 2002 .

[22]  Chang-JinCJ Kim,et al.  Valveless pumping using traversing vapor bubbles in microchannels , 1998 .

[23]  Gajanana C. Birur,et al.  Micro/nano spacecraft thermal control using a MEMS-based pumped liquid cooling system , 2001, MOEMS-MEMS.

[24]  Juan G. Santiago,et al.  A review of micropumps , 2004 .

[25]  G. Whitesides,et al.  Patterning electro-osmotic flow with patterned surface charge. , 2000, Physical review letters.

[26]  David Trebotich,et al.  Cooling Effect of a MEMS Based Micro Capillary Pumped Loop for Chip-Level Temperature Control , 2000, Micro-Electro-Mechanical Systems (MEMS).

[27]  Joo H. Kang,et al.  Analysis of pressure-driven air bubble elimination in a microfluidic device. , 2008, Lab on a chip.

[28]  Robert Osiander,et al.  MEMS and Microstructures in Aerospace Applications , 2005 .

[29]  C. Kim,et al.  Electrowetting and electrowetting-on-dielectric for microscale liquid handling , 2002 .