A process integration approach to industrial water conservation: a case study for a Chinese steel plant.

A systematic approach to optimizing water network has traditionally been utilized to exam and plan water conservation in industrial processes. In the present case study, water-pinch technology was used to analyze and optimize the water network of a steel plant near China's Zhangjiakou city. A system design was developed and a limiting constraint (Cl(-) concentration) was identified based on investigations of water quality then the minimum freshwater and wastewater targets were determined without considering water losses. The analysis was then extended by calculating the additional input of freshwater required to balance the actual water losses. A nearest-neighbor algorithm (NNA) was used to distribute the freshwater and recycled water among each of the plant's operations. The results showed that with some reconstruction of the water network, the flow rates of freshwater and wastewater could be decreased by 57.5% and 81.9%, respectively.

[1]  K. S. Eble,et al.  Zero discharge: What, why, and how , 1993 .

[2]  Helen H. Lou,et al.  Synthesis of an optimal wastewater reuse network , 2000 .

[3]  Miguel J. Bagajewicz,et al.  On the optimality conditions of water utilization systems in process plants with single contaminants , 2000 .

[4]  S. Aly,et al.  A new systematic approach for water network design , 2005 .

[5]  Yin Ling Tan,et al.  Targeting the minimum water flow rate using water cascade analysis technique , 2004 .

[6]  Daniel P. Loucks,et al.  Multi-level optimization for multi-objective problems , 1981 .

[7]  Nick Hallale,et al.  A NEW GRAPHICAL TARGETING METHOD FOR WATER MINIMISATION , 2002 .

[8]  James G. Mann,et al.  Industrial Water Reuse and Wastewater Minimization , 1999 .

[9]  G. T. Polley,et al.  Design Better Water Networks , 2000 .

[10]  Antonis C. Kokossis,et al.  A multi-contaminant transhipment model for mass exchange networks and wastewater minimisation problems , 1999 .

[11]  Ravi Prakash,et al.  Targeting and design of water networks for fixed flowrate and fixed contaminant load operations , 2005 .

[12]  Miguel J. Bagajewicz,et al.  ON A SYSTEMATIC DESIGN PROCEDURE FOR SINGLE COMPONENT WATER UTILIZATION SYSTEMS IN PROCESS PLANTS , 2001 .

[13]  Russell F. Dunn,et al.  Process integration design methods for water conservation and wastewater reduction in industry. Part 3: Experience of industrial application , 2002 .

[14]  Russell F. Dunn,et al.  Process integration design methods for water conservation and wastewater reduction in industry , 2001 .

[15]  M. Wasilewski,et al.  Make your process water pay for itself , 1996 .

[16]  Russell F. Dunn,et al.  Process integration design methods for water conservation and wastewater reduction in industry: Part 2: Design for multiple contaminants , 2001 .

[17]  Mahmoud M. El-Halwagi,et al.  RIGOROUS GRAPHICAL TARGETING FOR RESOURCE CONSERVATION VIA MATERIAL RECYCLE/REUSE NETWORKS , 2003 .

[18]  J. Paris,et al.  Water network analysis in pulp and paper processes by pinch and linear programming techniques , 2002 .

[19]  Miguel J. Bagajewicz,et al.  Design of water utilization systems in process plants with a single contaminant , 2000 .

[20]  M. El‐Halwagi.  Pollution prevention through process integration : systematic design tools , 1997 .

[21]  Miguel J. Bagajewicz,et al.  Algorithmic procedure to design water utilization systems featuring a single contaminant in process plants , 2001 .

[22]  T. Umeda,et al.  Optimal water allocation in a petroleum refinery , 1980 .

[23]  Sara E. Keckler,et al.  Material Reuse Modeling , 1998 .

[24]  Jirí Jaromír Klemes,et al.  Water and wastewater minimisation study of a citrus plant , 2003 .

[25]  Mariano J. Savelski,et al.  On the Use of Linear Models for the Design of Water Utilization Systems in Process Plants with a Sin , 2001 .

[26]  Antonis C. Kokossis,et al.  Wastewater minimisation of industrial systems using an integrated approach , 1998 .