Improving the performance of a small-scale cascade latent heat storage system by using gradual melting temperature storage tank

[1]  D. Rahmalina,et al.  Increasing the charge/discharge rate for phase-change materials by forming hybrid composite paraffin/ash for an effective thermal energy storage system , 2023, AIMS Materials Science.

[2]  Ismail,et al.  Thermal Performance Assessment for an Active Latent Heat Storage Tank by Using Various Finned-Coil Heat Exchangers , 2022, International Journal of Heat and Technology.

[3]  A. H. Lahuri,et al.  Thermal stress influence on the long-term performance of fast-charging paraffin-based thermal storage , 2022, Thermal Science and Engineering Progress.

[4]  R. Rahman,et al.  Development of free water knock-out tank by using internal heat exchanger for heavy crude oil , 2022, EUREKA: Physics and Engineering.

[5]  K. Ismail,et al.  Heat transfer enhancement of ice storage systems: a systematic review of the literature , 2022, Journal of Thermal Analysis and Calorimetry.

[6]  Xuemei Zhang,et al.  Charging and discharging characteristics of cascaded latent heat storage (CLHS) tank for low-temperature applications , 2022, Applied Thermal Engineering.

[7]  F. Pennec,et al.  Supercooling of phase change materials: A review , 2022, Renewable and Sustainable Energy Reviews.

[8]  Z. Hua,et al.  Optimization on volume ratio of three-stage cascade storage system in hydrogen refueling stations , 2022, International Journal of Hydrogen Energy.

[9]  P. Bénard,et al.  Multi-objective optimization of cascade storage system in hydrogen refuelling station for minimum cooling energy and maximum state of charge , 2022, International Journal of Hydrogen Energy.

[10]  Ismail,et al.  Increasing the rating performance of paraffin up to 5000 cycles for active latent heat storage by adding high-density polyethylene to form shape-stabilized phase change material , 2022, Journal of Energy Storage.

[11]  Qiuwan Wang,et al.  Influence of inlet temperature on the performance of cascade and hybrid storage tank for CSP plants , 2022, Applied Thermal Engineering.

[12]  Chao Xu,et al.  Cyclic performance of cascaded latent heat thermocline energy storage systems for high-temperature applications , 2022, Energy.

[13]  Ismail,et al.  Improving the Phase Transition Characteristic and Latent Heat Storage Efficiency by Forming Polymer-Based Shape-Stabilized PCM for Active Latent Storage System , 2022, SSRN Electronic Journal.

[14]  M. Nurtanto,et al.  Experimental investigation on the effect of thermophysical properties of a heat transfer fluid on pumping performance for a convective heat transfer system , 2021, Journal of Thermal Engineering.

[15]  Qiuwan Wang,et al.  Cycle cut-off criterion effect on the performance of cascaded, sensible, combined sensible-latent heat storage tank for concentrating solar power plants , 2021 .

[16]  L. Habeeb,et al.  PERFORMANCE EVALUATION OF A SOLAR WATER HEATER INTEGRATED WITH BUILT-IN THERMAL ENERGY STORAGE VIA POROUS MEDIA , 2021, Frontiers in Heat and Mass Transfer.

[17]  J. Ji,et al.  Design and analysis of an innovative concentrated solar power system using cascade organic Rankine cycle and two-tank water/steam storage , 2021 .

[18]  C. Xu,et al.  Experimental investigation of thermal performance for pulsating flow in a microchannel heat sink filled with PCM (paraffin/CNT composite) , 2021 .

[19]  Xiaohu Yang,et al.  Thermal performance assessment of a thermal energy storage tank: effect of aspect ratio and tilted angle , 2021, International Journal of Energy Research.

[20]  Min Chen,et al.  Design and investigation of single tank phase change thermal storage domestic hot water system , 2021 .

[21]  T. Barz.  Paraffins as phase change material in a compact plate-fin heat exchanger - Part II: Validation of the “curve scale” hysteresis model for incomplete phase transitions , 2021 .

[22]  Sung Ho Choi,et al.  Cascaded latent thermal energy storage using a charging control method , 2021 .

[23]  F. Bruno,et al.  Assessment of exergy delivery of thermal energy storage systems for CSP plants: Cascade PCMs, graphite-PCMs and two-tank sensible heat storage systems , 2020, Sustainable Energy Technologies and Assessments.

[24]  Liangyu Wu,et al.  Numerical analysis and improvement of the thermal performance in a latent heat thermal energy storage device with spiderweb-like fins , 2020 .

[25]  H. Refaey,et al.  Experimental investigations on the thermal performance of an ice storage system using twin concentric helical coil , 2020 .

[26]  Xing Ju,et al.  NUMERICAL INVESTIGATION ON THE THERMAL PERFORMANCE OF A CASCADED LATENT HEAT THERMAL ENERGY STORAGE , 2020 .

[27]  Yamei Zhang,et al.  Thermal energy storage performance of a three-PCM cascade tank in a high-temperature packed bed system , 2020 .

[28]  R. Sahoo,et al.  Effect of nano-enhanced PCM on the thermal performance of a designed cylindrical thermal energy storage system , 2020 .

[29]  L. Cabeza,et al.  Evaluation of the State of Charge of a Solid/Liquid Phase Change Material in a Thermal Energy Storage Tank , 2020, Energies.

[30]  T. Nguyen-Thoi,et al.  Solidification inside a clean energy storage unit utilizing phase change material with copper oxide nanoparticles , 2020 .

[31]  Yimin Xiao,et al.  Improvement of the efficiency of solar thermal energy storage systems by cascading a PCM unit with a water tank , 2020 .

[32]  Randeep Singh,et al.  TRANSIENT MODELLING OF AN EV INVERTER HEAT SINK WITH PCM , 2019, Frontiers in Heat and Mass Transfer.

[33]  A. Autee,et al.  Experimental analysis of solar fish dryer using phase change material , 2018, Journal of Energy Storage.

[34]  Li Wang,et al.  High density polyethylene (HDPE) — Graphite composite manufactured by extrusion: A novel way to fabricate phase change materials for thermal energy storage , 2018, Particuology.

[35]  Rahman Saidur,et al.  A review on supercooling of Phase Change Materials in thermal energy storage systems , 2017 .

[36]  G. Fang,et al.  Thermal energy storage materials and systems for solar energy applications , 2017 .

[37]  G. E. Kelly,et al.  Method of testing for rating thermal storage devices based on thermal performance. Interim report , 1975 .