Polymer Field‐Effect Transistors Fabricated by the Sequential Gravure Printing of Polythiophene, Two Insulator Layers, and a Metal Ink Gate

The mass production technique of gravure contact printing is used to fabricate state-of-the art polymer field-effect transistors (FETs). Using plastic substrates with prepatterned indium tin oxide source and drain contacts as required for display applications, four different layers are sequentially gravure-printed: the semiconductor poly(3-hexylthiophene-2,5-diyl) (P3HT), two insulator layers, and an Ag gate. A crosslinkable insulator and an Ag ink are developed which are both printable and highly robust. Printing in ambient and using this bottom-contact/top-gate geometry, an on/off ratio of 10 4 and a mobility of 0.04cm 2 V -1 s -1 are achieved. This rivals the best top-gate polymer FETs fabricated with these materials. Printing using low concentration, low viscosity ink formulations, and different P3HT molecular weights is demonstrated. The printing speed of 40 m min -1 on a flexible polymer substrate demonstrates that very high-volume, reel-to-reel production of organic electronic devices is possible.

[1]  J. Pflaum,et al.  Effect of Molecular Weight and Annealing of Poly(3‐hexylthiophene)s on the Performance of Organic Field‐Effect Transistors , 2004 .

[2]  Stephen R. Forrest,et al.  The path to ubiquitous and low-cost organic electronic appliances on plastic , 2004, Nature.

[3]  Arved C. Hübler,et al.  Device and circuit simulation of printed polymer electronics , 2007 .

[4]  H. Katz.  Recent Advances in Semiconductor Performance and Printing Processes for Organic Transistor-Based Electronics , 2004 .

[5]  Karlheinz Bock,et al.  Polymer Electronics Systems - Polytronics , 2005, Proceedings of the IEEE.

[6]  N D Robinson,et al.  Organic materials for printed electronics. , 2007, Nature materials.

[7]  H. Sirringhaus,et al.  Integrated optoelectronic devices based on conjugated polymers , 1998, Science.

[8]  Sunho Jeong,et al.  Direct writing of silver conductive patterns: Improvement of film morphology and conductance by controlling solvent compositions , 2006 .

[9]  Insulators and device geometry in polymer field effect transistors , 2005 .

[10]  R. Street,et al.  Organic polymeric thin-film transistors fabricated by selective dewetting , 2002 .

[11]  Elsa Reichmanis,et al.  Ring oscillator fabricated completely by means of mass-printing technologies , 2007 .

[12]  Zhenan Bao,et al.  Thin Film Deposition, Patterning, and Printing in Organic Thin Film Transistors , 2004 .

[13]  Ronald Österbacka,et al.  All-printed low-voltage organic transistors , 2008 .

[14]  Jie Zhang,et al.  Printed Organic Semiconducting Devices , 2005, Proceedings of the IEEE.

[15]  Maxim Shkunov,et al.  Liquid-crystalline semiconducting polymers with high charge-carrier mobility , 2006, Nature materials.

[16]  Janos Veres,et al.  Gate Insulators in Organic Field-Effect Transistors , 2004 .

[17]  Hagen Klauk.  Plastic electronics: Remotely powered by printing. , 2007, Nature materials.

[18]  H. H. Lee,et al.  A polymer gate dielectric for high-mobility polymer thin-film transistors and solvent effects , 2004 .

[19]  A. Song,et al.  Influence of processing conditions on the stability of poly(3-hexylthiophene)-based field-effect transistors , 2006 .

[20]  S. Leppävuori,et al.  Gravure offset printing of polymer inks for conductors , 2004 .

[21]  Henning Sirringhaus,et al.  Enhanced Mobility of Poly(3-hexylthiophene) Transistors by Spin-Coating from High-Boiling-Point Solvents , 2004 .

[22]  W. Milne,et al.  High performance organic semiconducting thin films: Ink jet printed polythiophene [rr-P3HT] , 2001 .

[23]  N. Halonen,et al.  Gravure printing of conductive particulate polymer inks on flexible substrates , 2005 .

[24]  U. Schubert,et al.  Inkjet Printing of Polymers: State of the Art and Future Developments , 2004 .

[25]  D. Gundlach,et al.  Organic electronics. Low power, high impact. , 2007, Nature materials.

[26]  Yong-Young Noh,et al.  Downscaling of self-aligned, all-printed polymer thin-film transistors. , 2007, Nature nanotechnology.

[27]  Wolfgang Clemens,et al.  Stability of polythiophene-based transistors and circuits , 2003 .

[28]  Jie Zhang,et al.  Investigation of Using Contact and Non-contact Printing Technologies For Organic Transistor Fabrication , 2002 .

[29]  Jean M. J. Fréchet,et al.  Dependence of Regioregular Poly(3-hexylthiophene) Film Morphology and Field-Effect Mobility on Molecular Weight , 2005 .

[30]  Henning Sirringhaus,et al.  Device Physics of Solution‐Processed Organic Field‐Effect Transistors , 2005 .

[31]  Wolfgang Clemens,et al.  Fully printed integrated circuits from solution processable polymers , 2004 .

[32]  Ronald Österbacka,et al.  Low‐Voltage Organic Transistors Fabricated Using Reverse Gravure Coating on Prepatterned Substrates , 2008 .

[33]  M. Aegerter,et al.  Direct gravure printing of indium tin oxide nanoparticle patterns on polymer foils , 2008 .

[34]  Costas P. Grigoropoulos,et al.  Fabrication of multilayer passive and active electric components on polymer using inkjet printing and low temperature laser processing , 2007 .

[35]  Daniel R. Hines,et al.  Transfer printing methods for the fabrication of flexible organic electronics , 2007 .

[36]  Robert A. Street,et al.  Additive jet printing of polymer thin-film transistors , 2003 .

[37]  Tobin J. Marks,et al.  Gate Dielectrics for Organic Field‐Effect Transistors: New Opportunities for Organic Electronics , 2005 .

[38]  Zhenan Bao,et al.  Effect of Mesoscale Crystalline Structure on the Field‐Effect Mobility of Regioregular Poly(3‐hexyl thiophene) in Thin‐Film Transistors , 2005 .

[39]  H. Kang,et al.  Active Area and Channel Formation for Polymer Thin‐Film Transistors , 2006 .

[40]  H. Wolf,et al.  Nanoparticle printing with single-particle resolution. , 2007, Nature nanotechnology.

[41]  Jeong In Han,et al.  Electrical characteristics of poly (3-hexylthiophene) thin film transistors printed and spin-coated on plastic substrates , 2003 .

[42]  A. Facchetti,et al.  A high-mobility electron-transporting polymer for printed transistors , 2009, Nature.