Vibration Analysis of Partially Damaged Rotor Bar in Induction Motor under Different Load Condition Using DWT

The relevance of the development of monitoring systems for rotating machines is not only the ability to detect failures but also how early these failures can be detected. The purpose of this paper is to present an experimental study of partially damaged rotor bar in induction motor under different load conditions based on discrete wavelet transform analysis. The approach is based on the extraction of features from vibration signals at different level of damage and three mechanical load conditions. The proposed analysis is reliable for tracking the damage in rotor bar. The paper presents an analysis and extraction of vibration features for partially damaged rotor bar in induction motors. The experimental analysis shows the change in behavior of vibration due to load condition and progressive damage.

[1]  Y. Gritli,et al.  Closed-loop bandwidth impact on MVSA for rotor broken bar diagnosis in IRFOC double squirrel cage induction motor drives , 2013, 2013 International Conference on Clean Electrical Power (ICCEP).

[2]  Teymoor Ghanbari,et al.  An Auto-correlation Function Based Technique for Discrimination of Internal Fault and Magnetizing Inrush Current in Power Transformers , 2015 .

[3]  Teymoor Ghanbari,et al.  Autocorrelation function-based technique for stator turn-fault detection of induction motor , 2016 .

[4]  Kil To Chong,et al.  Induction Machine Condition Monitoring Using Neural Network Modeling , 2007, IEEE Transactions on Industrial Electronics.

[5]  Walmir M. Caminhas,et al.  SVM practical industrial application for mechanical faults diagnostic , 2011, Expert Syst. Appl..

[6]  Thomas G. Habetler,et al.  A survey of condition monitoring and protection methods for medium voltage induction motors , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[7]  Robson Pederiva,et al.  Detection of electrical faults in induction motors using vibration analysis , 2013 .

[8]  Jose A. Antonino-Daviu,et al.  Vibration Transient Detection of Broken Rotor Bars by PSH Sidebands , 2013, IEEE Transactions on Industry Applications.

[9]  Alireza Sadeghian,et al.  Online Detection of Broken Rotor Bars in Induction Motors by Wavelet Packet Decomposition and Artificial Neural Networks , 2009, IEEE Transactions on Instrumentation and Measurement.

[10]  Arturo Garcia-Perez,et al.  Automatic Online Diagnosis Algorithm for Broken-Bar Detection on Induction Motors Based on Discrete Wavelet Transform for FPGA Implementation , 2008, IEEE Transactions on Industrial Electronics.

[11]  Thomas G. Habetler,et al.  A survey of condition monitoring and protection methods for medium voltage induction motors , 2009 .

[12]  Linfeng Deng,et al.  A vibration analysis method based on hybrid techniques and its application to rotating machinery , 2013 .

[13]  Robert X. Gao,et al.  Wavelets for fault diagnosis of rotary machines: A review with applications , 2014, Signal Process..

[14]  Kil To Chong,et al.  Vibration Signal Analysis for Electrical Fault Detection of Induction Machine Using Neural Networks , 2007 .

[15]  Rosario Miceli,et al.  Vibration signature analysis for monitoring rotor broken bar in double squirrel cage induction motors based on wavelet analysis , 2014 .

[16]  Arturo Garcia-Perez,et al.  Startup current analysis of incipient broken rotor bar in induction motors using high-resolution spectral analysis , 2011, 8th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives.

[17]  Wilson Wang,et al.  A Spectrum Synch Technique for Induction Motor Health Condition Monitoring , 2015, IEEE Transactions on Energy Conversion.

[18]  Dragan Matic,et al.  Fault Diagnosis of Rotating Electrical Machines in Transient Regime Using a Single Stator Current’s FFT , 2015, IEEE Transactions on Instrumentation and Measurement.

[19]  Antero Arkkio,et al.  Signatures of electrical faults in the force distribution and vibration pattern of induction motors , 2006 .

[20]  Stéphane Mallat,et al.  A Theory for Multiresolution Signal Decomposition: The Wavelet Representation , 1989, IEEE Trans. Pattern Anal. Mach. Intell..

[21]  Rene de Jesus Romero-Troncoso,et al.  Comparative Study of Time-Frequency Decomposition Techniques for Fault Detection in Induction Motors Using Vibration Analysis during Startup Transient , 2015 .

[22]  M. Moalem,et al.  Intelligent Diagnosis of Broken Bars in Induction Motors Based on New Features in Vibration Spectrum , 2007, 2007 IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives.

[23]  Rastko Fiser,et al.  Detection of Broken Bars in Induction Motor Through the Analysis of Supply Voltage Modulation , 2010, IEEE Transactions on Industrial Electronics.

[24]  Hubert Razik,et al.  A Novel Monitoring of Load Level and Broken Bar Fault Severity Applied to Squirrel-Cage Induction Motors Using a Genetic Algorithm , 2009, IEEE Transactions on Industrial Electronics.

[25]  M. Ebrahimi,et al.  A New Approach for Induction Motor Broken Bar Diagnosis by Using Vibration Spectrum , 2006, 2006 SICE-ICASE International Joint Conference.

[26]  J. C. Kappatou,et al.  A Novel Approach for Broken Bar Fault Diagnosis in Induction Motors Through Torque Monitoring , 2013, IEEE Transactions on Energy Conversion.

[27]  Jawad Faiz,et al.  EMD-Based Analysis of Industrial Induction Motors With Broken Rotor Bars for Identification of Operating Point at Different Supply Modes , 2014, IEEE Transactions on Industrial Informatics.

[28]  Hubert Razik,et al.  Evaluation of startup-based rotor fault severity indicators under different starting methods , 2014, IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society.

[29]  Eduardo Cabal-Yepez,et al.  Novel Methodology for Online Half-Broken-Bar Detection on Induction Motors , 2009, IEEE Transactions on Instrumentation and Measurement.