Industrial AC Drives Status of Technology

AbstractThe technological reasons which are favoring AC drives as an alternative in adjustable speed applications are briefly summarized and the global trends, resulting from maturing of the AC drive technology, are examined. The developments of each of the drive sub-systems (static power converter, control and motor) are evaluated against industry requirements and the overall trends in their respective technologies are assessed.

[1]  Russel J. Kerkman,et al.  A New Synchronous Current Regulator and an Analysis of Current-Regulated PWM Inverters , 1986, IEEE Transactions on Industry Applications.

[2]  H. van der Broeck,et al.  Analysis and Realization of a Pulse Width Modulator Based on Voltage Space Vectors , 1986, 1986 Annual Meeting Industry Applications Society.

[3]  Paolo Tenti,et al.  A novel hysteresis control method for current-controlled voltage-source PWM inverters with constant modulation frequency , 1990 .

[4]  Phoivos D. Ziogas,et al.  State-of-the-art carrier PWM techniques: a critical evaluation , 1988 .

[5]  T.G. Habetler,et al.  Control strategies for direct torque control using discrete pulse modulation , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[6]  Deepak Divan,et al.  Zero-switching-loss inverters for high-power applications , 1989 .

[7]  F. Profumo,et al.  Self tuning of induction motor servo drives using the universal field oriented controller , 1990, 21st Annual IEEE Conference on Power Electronics Specialists.

[8]  H. Shisekane,et al.  High power transistor modules with intelligent functions , 1990, Proceedings of the 2nd International Symposium on Power Semiconductor Devices and Ics. ISPSD '90..

[9]  C. Bruning,et al.  Off-line integrated full-bridge drrver for induction motors , 1990, Proceedings of the 2nd International Symposium on Power Semiconductor Devices and Ics. ISPSD '90..

[10]  Phoivos D. Ziogas,et al.  Rectifier-Inverter Frequency Changers with Suppressed DC Link Components , 1986, IEEE Transactions on Industry Applications.

[11]  John A. Houldsworth,et al.  The Use of Harmonic Distortion to Increase the Output Voltage of a Three-Phase PWM Inverter , 1984, IEEE Transactions on Industry Applications.

[12]  G. B. Kliman,et al.  Noninvasive detection of broken rotor bars in operating induction motors , 1988 .

[13]  X. Xu,et al.  A stator flux oriented induction machine drive , 1988, PESC '88 Record., 19th Annual IEEE Power Electronics Specialists Conference.

[14]  Keith McLeay,et al.  Interturn Stator Voltage Distribution Due to Fast Transient Switching of Induction Motors , 1982, IEEE Transactions on Industry Applications.

[15]  Mutsuhiro Mori,et al.  High speed, high current capacity LIGBT and diode for output stage of high voltage monolithic three-phase inverter IC , 1990, Proceedings of the 2nd International Symposium on Power Semiconductor Devices and Ics. ISPSD '90..

[16]  Thomas A. Lipo,et al.  A direct field oriented controller for induction motor drives using tapped stator windings , 1988 .

[17]  Barry W. Williams,et al.  Derivation of motor line-current waveforms from the DC-link current of an inverter , 1989 .

[18]  V. R. Stefanovic,et al.  A novel dc - side commutated inverter , 1980, 1980 IEEE Power Electronics Specialists Conference.

[19]  T.A. Lipo,et al.  A new direct field oriented controller employing rotor end ring current detection , 1990, 21st Annual IEEE Conference on Power Electronics Specialists.

[20]  Louis-A. Dessaint,et al.  An adaptive current controller for PWM inverters , 1986, 1986 17th Annual IEEE Power Electronics Specialists Conference.

[21]  A. F. Wick,et al.  Design and Experimental Results of a Brushless AC Servo Drive , 1984, IEEE Transactions on Industry Applications.

[22]  Francisc C. Schwarz,et al.  An improved method of resonant current pulse modulation for power converters , 1976, 1975 IEEE Power Electronics Specialists Conference.